Yet Another Clean-out

Calis

Salish for "Kingfisher"
Sep 16, 2011
370
106
Blaine/Washington
Name
Bill
Boat
Bayliner 2855 Ciera
OK many of you have inspired me to go through some spaces that have been left alone for awhile. First off is the Reloading and gun room:

Reloading Dies:
257 Roberts Pacific Dies very nice shape
300 Win Mag Lee Dies very nice shape SOLD
Both sets are in off brand cases
15.00 each

Loadbook USA Reloading books 300 savage SOLD
6.5 creedmoor 5.00

Once Fired Brass assorted headstamps
7mm Rem Mag 100+ with a few mixed Nickle 40 with 3 20 rnd cases, 30.00 without --SOLD
300 WSM just shy of 220 with almost 100 NP. 75.00 for all the NP in 50 rnd cases 80.00 for all the brass in 50 rnd cases beautiful brass!!
357 magnum Just shy 320 with almost 150 NP. 25.00 for NP, 25.00 for brass, in cases

Winchester model 70 Stainless steel barrel with the BOSS system, pristine bore, mint, mint ,mint chambered for 300 win mag 0 rounds Brand new barrel 140.00
Remington 700 matte black barrel Chambers in 243 win, Very nice bore, bit of barrel exterior surface rust and marks, iron sights Low shot count takeoff 75.00
Both were for projects that never materialized.

Savage Model 11 left hand 300 WSM PROJECT. This is a project I acquired that was intended for someone else who changed their direction. It consist of a savage model 11 left hand competition short magnum large shank, This action uses clips and has them. It has a Large shank 300 WSM barrell in matte black in very nice condition with new barrel shank and recoil lug. Also come with savage composite left hand stock brand new. Parts just need to be married and smithed together. But you would have all the parts for a wicked NW elk gun when finished. The 300 WSM brass from above was intended for this project. The barrel and barrel parts are worth 175.00 alone. asking 200.00 and willing to make a package if wanting the 300wsm brass.

Garage:
Trailer AXLE project: Complete Dodge caravan Rear axle, Tire to tire and everything in between In excellent shape. Rated at 3500 lbs capacity tire are like brand new 275.00 This is a ideal set-up to make a utlity trailer the dodge has mounting pads to run your springs and frames, common parts and lug pattern for cheap upkeep

1986 7.5 Evinrude 2 stroke outboard E8RCTA 18" long shaft, Excellent shape 650.00

1975 20 hp Mercury 2 stroke Model 200 24" extra long shaft with electric start wiring looks in good shape with great compression haven't had running since I got is but supposedly a great runner. No tank 450.00

Apelco VLX5120 VHF radio, brand new condition 40.00 SOLD


MORE TO FOLLOW AS I UNDIG IT OUT!!!!!! LOL

257 Roberts Pacific relaoding dies.jpg




Loadbook Usa 300 Sav and 6.5 Creedmoore.jpg


7mm Rem Mag Brass.jpg


win 70 win mag boss.JPG


Winchester 70 SS w boss 300 win magIMG_1105.JPG


WInchester 70 SS 300 win mage.JPG


IMG_1094.JPG


IMG_1101.JPG


IMG_1095.JPG
 
Last edited:
Upvote 0

slab tech 1

Works overrated- lets go fishing
Apr 1, 2011
268
281
Ferndale
Name
Eric
Boat
Parker 2520 XL
I will take the 300 win mag dies. I’m Located in Ferndale so I can meet up with you. We just picked up a Hornady lock n load progressive loader but only have 9mm dies. If you have any more dies you want to get rid of I maybe interested or any other supplies...
 
Upvote 0

Calis

Salish for "Kingfisher"
Sep 16, 2011
370
106
Blaine/Washington
Name
Bill
Boat
Bayliner 2855 Ciera
I will take the 300 win mag dies. I’m Located in Ferndale so I can meet up with you. We just picked up a Hornady lock n load progressive loader but only have 9mm dies. If you have any more dies you want to get rid of I maybe interested or any other supplies...
[/QUOT
I will take the 300 win mag dies. I’m Located in Ferndale so I can meet up with you. We just picked up a Hornady lock n load progressive loader but only have 9mm dies. If you have any more dies you want to get rid of I maybe interested or any other supplies...
Give me a call anytime after 12 noon 360-371-0715, Bill
 
Upvote 0