Transom Transducer mounting Help

Luat

Well-Known "Member"
Jul 9, 2016
99
21
Beach
Name
@@@
Boat
None
Hi everyone
I have a question. Can I mount two transducer close together around 3->4 inched ? ( Airmar 185HW and 3in1 ducer) . Bc my transom has a limited of space . Thanks
 

keada714

I've posted enough I should edit this section
Jun 9, 2012
769
103
Los Angeles
Name
Mark
Boat
None
Mount the 3in1 ducer lower than the 185hw if possible. You don't want the side scan to pick up the 185hw.

If you have both ducer firing on the same frequencies, you will have interference.
 

Luat

Well-Known "Member"
Jul 9, 2016
99
21
Beach
Name
@@@
Boat
None
Mount the 3in1 ducer lower than the 185hw if possible. You don't want the side scan to pick up the 185hw.

If you have both ducer firing on the same frequencies, you will have interference.
Thanks you brotha
 

Luat

Well-Known "Member"
Jul 9, 2016
99
21
Beach
Name
@@@
Boat
None
Mount the 3in1 ducer lower than the 185hw if possible. You don't want the side scan to pick up the 185hw.

If you have both ducer firing on the same frequencies, you will have interference.
Can I mount the Airmar ducer on the right side 3in1 ? It’s will sitting on the top the trailer bunk ?it will work good if it’s a little bit far on the center of the boat? Thanks

AC88EC3B-5C71-4E0E-B3E6-68A39AEDE440.jpeg


34FF7578-A75D-40BC-BC9A-14892F560BB7.jpeg
 

SD2600

Opinions aren’t constitutional- they are earned
Apr 13, 2017
500
339
39
San diego
Name
Dustin
Boat
26' sea swirl
My 3:1 lines up with a bunk as well... just make sure u or anyone else doesn’t which your boat up further that it sits and it shouldn’t be a problem
 
  • Like
Reactions: Luat