Questions for fuel & water separator for 2007 Parker 2320

Tuna-Sniper

Tuna Sniper
Oct 26, 2015
1,434
1,395
Inland Empire
Name
tom
Boat
2018 Parker 2320 SL
2007 Parker 2320 Yamaha F250TXR, The first owner had not changed out the filter for the last 9 years so everything rusted. I need to replace the whole kit with a new bowl with sensors, filter and base.

What do you guys recommend ?

IMG_5311.JPG IMG_5314.JPG
 
Last edited:
Upvote 0

Hot Spot

2320
Oct 15, 2010
93
33
los angeles, ca.
Name
mike
Boat
Nostrovia 2320 PARKER
Pull the separator out disconnect the lines. put it in a vice use a oil filter wrench and you will get it apart clean and oil the threads, buy just the filter and put it back in. you should have a filter on the motor that is like a smaller water separator, change that filter also. the one on the motor should be connected to a warning light so you do not have to have the large one connected. their are 2 more filters you may have to replace on the motor.

20160731_081056.jpg
 
Upvote 0

Tuna-Sniper

Tuna Sniper
Oct 26, 2015
1,434
1,395
Inland Empire
Name
tom
Boat
2018 Parker 2320 SL
I already broke the base and having a hard time taking the bowl out. I need to buy a complete kit with sensor propes and wondering if this was the original Yamaha kit. I already changed out the small filter inside the motor and did not see any sensors attached to it.
 
Upvote 0

ShadBurke

Just a Guy and his Boston Whaler
Oct 28, 2005
3,694
2,113
Carlsbad
Name
Shad Burke
Boat
22' Boston Whaler Guardian
buy the yamaha blue one. the entire kit is around $70.

West marine port supply racor 320 kit is also around $70.

without port supply, it's around $100
 
  • Like
Reactions: usmc_reyes2007
Upvote 0

Hot Spot

2320
Oct 15, 2010
93
33
los angeles, ca.
Name
mike
Boat
Nostrovia 2320 PARKER
Racor is what I have on mine west marine has what you need if you need it to day. If not go on line and buy it, it will be a lot cheaper. their should be only 2 ,1/2in or 7/16 bolts holding it in. remove them That way you can pull it out where it will be easer to work on it. This is the small water separator. I spoke of, their is 1 more filter before the one in the carb.

DSCF1471.JPG
 
Upvote 0

Hot Spot

2320
Oct 15, 2010
93
33
los angeles, ca.
Name
mike
Boat
Nostrovia 2320 PARKER
90gph is good you want fuel to flow freely to the carb. the water separator in your link looks like mine, you can buy the sensor and put it in the bottom of the bowl their should be 1 of 2 drain bolts you can remove. their is a parker dealer in costa mesa, ca. can't find their# Richards boats & motors in Marina Delray 310-822 8618 both of places can give you answers and good parts. you can buy the small separator from parker and add it to your motor. I have no sensors on my big water separator. when I change 1 filter I change all of them at the same time. every 100hrs. for me that is about 6 or 7 times a yr.
 
Upvote 0

Tuna-Sniper

Tuna Sniper
Oct 26, 2015
1,434
1,395
Inland Empire
Name
tom
Boat
2018 Parker 2320 SL
thanks for the help. I just send West Coast Marine the pictures and hopefully they can find me the parts.
 
Last edited:
Upvote 0

Tuna-Sniper

Tuna Sniper
Oct 26, 2015
1,434
1,395
Inland Empire
Name
tom
Boat
2018 Parker 2320 SL
will it be ok using plastic bowl in an enclosed area where the batteries are ?
 
Upvote 0