Fiberglass Advice Needed

AllzGood

Baja Bound
Jul 1, 2020
142
90
36
Ventura
Name
Dustin
Boat Name
Parker 2320 Extended Cabin
Hey all, pulled my fuel tank yesterday to discover the glassed in plywood it rests on has delaminated and need to be replaced and glassed back in.

I’m thinking about doing the repair myself, shouldn't be too hard but definitely need some advice. Tomorrow I’m going to cut out the plywood and buy the materials.

How would you proceed with this project? Prep work, fiberglass weight/sheet size, number of sheets, etc, etc

Im capable but a fiberglass newbie so all advice is welcome, thanks

Also, the coffin is in solid shape with no rot or damage to the stringers or bulkheads. Fiberglass appears to be solid other than the mentioned supporting members. My other question is should I reseal the coffin with something before dropping in the new tank? Not sure if that’s necessary or common practice. Thanks

D021F178-EE98-48B4-AC5C-5B16EBFE348F.jpeg
4D56347D-A445-49D8-9784-13BC13FF8CA1.jpeg
 
Last edited:
Upvote 0