17'6 Klamath Center Console

Big Bay Yachts

acefuture

@acecraftco
Apr 3, 2019
678
680
Costa Mesa, CA
Name
Ace
Boat
Always changing
Got my eyes on another potential project and unfortunately can't fit 3 boats in the driveway. If I could I would keep this rig, but I can't.
17'6" hull
18' with bow pulpit and anchor
Just over 19' with swing tongue closed

This boat underwent a complete hull up rebuild in February of this year. You can see the entire thread here:

Details:
1992 hull Klamath (similar to bayrunner, and now manufacturer of bayrunner baja for those unfamiliar)
This hull was tore completely down bare, has got new foam, reinforced and welded stringers and bulkheads so it's stronger than new. The few small pinholes have been welded up and now the boat doesn't leak a drop.
2001 Yamaha F40TLRX 4 stroke (unknown hours, I've put about 50 hours on it since I've owned it)
Motor has had all new fluids including lower unit oil and motor oil/filter in the last 15 hours. Just put brand new prop shaft seals in and checked the dog gears and looked perfect. Carbs just had a full clean and service as well and it got new plugs. Really solid pairing for this boat, it'll jump up on plane at 9mph with 2 people in it. Not sure top speed, but i've had it at 26mph comfortably.
EZ Loader trailer with brand new bunks, U bolts, cross member, and guide posts. Tires are in great condition. Swing tongue for shorter storage
Brand new deck
Brand new paint
12 gallon gas tank
Brand new fuel lines and filters
Custom lean post
Custom center console with batteries centered (2 optima red tops)
All brand new marine grade wiring
Brand new blue seas panel and perko switch
Brand new steering wheel
Humminbird 798si Fishfinder (has speedometer and water temp)
Standard Horizon GX1700 VHF with DSC and GPS
Brand New 8ft Shakespeare antenna
Brand new Lewmar claw anchor and bow pulpit with ~200ft of rope (guestamite)
14 gallon kodiak pro flow bait tank with brand new hoses
Brand new bilge pump (comes with spare)
Brand new 800gph bait pump
Custom cover for the boat and motor
I'm sure there's a lot more I'm missing

I've been fishing this boat every week since i've finished it and it's a damn workhorse. Very capable boat that will take you just about anywhere on the right days. BD member owned for many years, would be cool to keep it that way. Any questions feel free to ask. No tire kickers though. Cash only $8900 NOW $7900

Call or text (text preferred) 949 394 9474
Located in Costa Mesa/Newport Beach

IMG_4795.JPG

IMG_3520 2.JPG

IMG_3523.JPG

IMG_4256.JPG

IMG_4257.JPG

IMG_4252.JPG

IMG_4253.JPG

IMG_4251.JPG
 
Last edited:
Upvote 0

acefuture

@acecraftco
Apr 3, 2019
678
680
Costa Mesa, CA
Name
Ace
Boat
Always changing
Several people asking about dimensions so here they are:

17’6” Hull
18' with bow pulpit
19’4” with swing tongue closed (including motor 215" without)
22’9” with swing tongue out (including motor)
6’3” wide

Somewhere in the neighborhood of 1000lbs (rough guess)
 
Upvote 0

okgene

Newbie
Feb 1, 2018
72
49
36
Los Angeles, CA
Name
Gene
Boat
14' Mirrocraft
Several people asking about dimensions so here they are:

17’6” Hull
18' with bow pulpit
19’4” with swing tongue closed (including motor 215" without)
22’9” with swing tongue out (including motor)
6’3” wide

Somewhere in the neighborhood of 1000lbs (rough guess)

is that width on the trailer? Outside tire to outside tire?
 
  • Like
Reactions: Haly0
Upvote 0