1. FDFishin'

    Capacity Placard

    Anyone have any info for getting a Capacity Placard for my Valco Bayrunner Baja? It’s a ‘98 and the original placard is toast. Thanks in advance...
  2. F

    12' Sea Nymph Aluminum with Honda 15 Four Stroke - Fully Built Deck

    Up for sale is a 12’ Sea Nymph with a fully built bass boat deck that comes with a 15hp Four Stroke Honda and a Motor Guide 80lb thrust trolling motor. I bought this boat and decided to go in another direction so it’s up for sale. Paperwork all ready to go. No trailer Great layout and well...
  3. L

    2009 17’ Klamath Bayrunner Baja, Welded Aluminum Hull From Valco Jigs

    $17,900 OBO. NORTH OC SOCAL (FULLERTON) I am the original owner (Paid off since 2009, TITLE ON HAND) bought this fully welded Aluminum Klamath 17’ Bayrunner Baja in 2009. The boat/engine/trailer was purchased new in 2009 from Tradewind Inflatables (Costa Mesa). The Hull was a NEW 2008 model...
  4. BradFisherman

    12’ Valco Aluminum w/ Trailer - $800

    Hi BD! Here I have my 12’ Valco Aluminum for sale. Boat is in good condition, as well as the trailer. A few years back I had the idea to replace all the wood ( Seats, Transom Mount ) and then I had a daughter. Obviously never got done, but when I did rip out all that old wood, I noticed the...
  5. bajadog

    1984 Valco Bayrunner 16' CC w/Yamaha 40hp San Diego

    1984 16' Bayrunner aluminum center console. $4500 OBO 2010 Yamaha 40 hp 4 stroke (all fluids changed, new impeller). About 800 hours on engine. Using synthetic Yamaha fluids (as previous owner did). Garmin GPS West Marine VHF Lights all work. Bilge pump and bait pump work. I installed an hour...
  6. G

    1994 valco westcoaster.

    So i have up for sale a 1994 152 widebody valco westcoaster Trailer is a 1994 pacific trailer with perm tags. Outboard is a 1994 48hp spl Johnson Trailer lenth is around 20ft Motor start up and runs good. Registration is paid till 2021 Trailer is in good shape. Has 4 swivel chairs(going to...
  7. Christianbrat

    1975 Valco 14' & Trailer with "Like New" 2001 Honda 9.9hp 4 Stroke.

    1975 Valco 14' fishing boat. Riveted construction is stronger than welds and allows for flex instead of cracking. Hull is in good shape with a few small dents and no leaks. Brand new trailer lights and wires. Boat, engine, and trailer have never been in salt. Fresh water only for its whole...
  8. D

    Bayrunner 17’ +

    Hey all, Im in the market for a solid Bayrunner 17’ or greater. I’d prefer something in the 17’ / 18’ size, but I could go bigger for the right boat. Ideally turn key or close to it. Let me know what you have and hopefully we can strike a deal!!! :cheers: Dustin
  9. Matt Nunes

    16-20 bayrunner

    If anybody has a skiff (projects are 100% welcome), or knows anyone that has one, give me a shout. Looking for something in the 16-18 foot range but am open to anything really. Doesn’t need a motor. If someone has got one laying around taking up space then let me know. Would also be willing to...
  10. I

    Wanted Aluminum Center Console Boat

    Hi everyone, I’m looking for a 18’ to 22’ aluminum center console boat.
  11. Tslayer99

    Still Frothing For A 16 Bayrunner, Someone Kick Me A Deal So I'll Stop Pestering!

    Guys I know you're holding out that perfect 16 foot leakless CC from me.. with a 40 HP 4 stroke, great bilge, bait tank, and electronics, and the sexiest bow rail a tin can could tame. Someone help me out so I can put 5K in your pocket and I can leave you all alone from the tin hunt haha. Thanks...
  12. JAKE!!

    22.5 bayrunner baja $8000

    Reduced from $12000 to $8000 jake 562-280-9600 [email protected]
  13. hbouldin1216

    WTT/WTB 14-16 ft skiff or 15-25hp tiller outboard

    Hey guys, I'm looking for a dependable 15-25hp tiller outboard (2 or 4 stroke) and would like to spend less than $750 on it. This would be a salt motor for taking the 14ft Klamath my dad and I share out into the local bays. My other option would be getting my own little skiff and tailoring...
  14. S

    Aluminum Center Console Customizing

    Hey everyone! Wanted to gather advice on customizing my (welded aluminum) Valco Bayrunner 18' center console. #1.Moving the center console location. It currently has the original placement of the center console which is located about dead center from bow to stern. I wanted to push the center...