aluminum

I’m selling my 18’ Bayrunner, this boat has been absolutely amazing to me but it’s time for something else. Handles the ocean amazingly, and has caught a lot of fish. This boat is extremely seaworthy and has always kept me safe. - 1998 50hp Yamaha 4 stroke main, with about 400 hours on it. (...

1984 Gregor Aluminum fishing boat for Bay, Lake or Inshore fishing. I’ve owned the boat for 6 years. Boat has been rewired with a 2 battery system, one dedicated starting battery and one accessory deep cycle battery. Hull was gone through, re-welded and re-foamed to eliminate any leaks. Engine...

2008 Klamath Deluxe with 20hp Honda (Under 200 Hrs) Trailer in good shape, Replaced majority of hardware a within last year. All service up to date and I have paperwork since I have owned the boat. Runs like a top! Meticulously maintained and always rinsed with saltaway! Extras include: Garmin...

Well I'm on the Hunt for a 179 Sea Runner if anyone has one or has a line on one, Ideally with 4 strokes but id consider 2 stroke setups as well. Don't have to be fully rigged by any means but would at least like a top with drop curtain, and a fish finder or finder/plotter setup already...

Transported boat from Wyoming, boat pictured is a 327 Chaparral, measures 32’6” 13000 GVWR LED lights Boat guides Disc brakes on all 3 axles Adjustable bunks Trailer is very clean Magic Tilt model Ttalls3110

Taco Marine 3 Rod Trident Cluster Model F31-0770-BSA1. 15 Degree bent butt version. Use to expand your existing overhead rod storage or use it for kite fishing. This one went on a few boat rides with me and that's it. Great condition. This is the bent butt version so rods sit about...

Looking to purchase a Gregor seahawk center console. Not afraid of a bit of a project. Thank you.

I have a very sweet 22ft. Bayrunner cuddy cabin with 1/4 inch aluminum deck lean to rail seating , factory hard top with windshield that goes all the way up to the hardtop , and 2010 Honda fuel injected 135 . Gets 6 miles to the gallon witch is 3 times plus what it’s fiberglass counterpart gets...

Six brand new Fishmaster adjustable rod holders, anodized (Not painted), sold only as a set: * Swivel mount and rotating clamp design adjustable from 30 degrees to 180 degrees, easily lockable in place. * Constructed from 6063-T6 aluminum then carefully bright dipped anodized. Kit comes complete...

KickAss Fish Kill'n & Harvest Machine With Comforts for Family or Crew. READY TO FISH NOW!! BossLevel Durable, DadLevel Safe Over'Nights out on BigBlue (Sleeps 4-6) 1 Owner, 1 of 8 Built. Beautiful 25' (30ft LOA) all aluminum fishing/camping/adventure & incredibly safe Alaska Bulkhead Vessel...

This is the definition of a perfect turnkey boat. Just in time for the heatwave! This boat and trailer are in excellent condition with very low hours (~100). It has been kept garaged for the majority of its life and kept covered any time that it would be out of the garage for more than a day...

Hey BD! Here where I work we produce a tonnage of high quality aluminum trimmings. Most are square shaped, and would lend themselves well to melting down for casting, or could be cut into smaller pieces. This stuff is an alloy for the baking industry, containing silica and manganese (I...

Aftco Flying gaff in great condition. $200 Sold, thanks BD!

2016 triple axle , heavy duty trailer. Built for the Navy. 33’ total length 8” I beam 18,000 lbs GVWR 15,000 lbs load capacity Model WS8M180 $9500 Give me a call if interested 619-307-4875 Located in San Diego, CA

($8,000 obo) Extra beefy 1984 18’ baja bayrunner. The boat had a lot of welding and reinforcing on the front, bottom chimes, and transom. Previous owner had that work done to make a thicker baja boat. He had a Johnson 110 on it I believe. So the transom can take a large engine. Trailer has newly...

Sold!!!

I have a Starcraft 18 ft center console fishing boat for sale for $4,900 Includes: - Trash can bait tank with working bait pump - Garmin Fish Finder, fairly new only a few months old. - plenty of rod holders for fishing poles - Red Bimini top for shade - working Nav Lights - working bilge pump...

Aluminum rod holders roughly 6' long. Currently had 8 holders that can be adjusted in 2 directions, but could possibly fit a few more if you wanted to add more holders. $400 pick up in culver city area only.

Hey everyone, We ran across a few spare POSI-LOCK Aluminum Reel Seats; anyone want to take them off our hands? Featured in this giveaway is a 22 MM Black Aluminum Reel Seat and a 24MM Silver Aluminum Seat. We will choose 2 lucky rod builders to try these seats. To enter, email me at...

$17,900 OBO. NORTH OC SOCAL (FULLERTON) I am the original owner (Paid off since 2009, TITLE ON HAND) bought this fully welded Aluminum Klamath 17’ Bayrunner Baja in 2009. The boat/engine/trailer was purchased new in 2009 from Tradewind Inflatables (Costa Mesa). The Hull was a NEW 2008 model...

Hi BD! Here I have my 12’ Valco Aluminum for sale. Boat is in good condition, as well as the trailer. A few years back I had the idea to replace all the wood ( Seats, Transom Mount ) and then I had a daughter. Obviously never got done, but when I did rip out all that old wood, I noticed the...

1997 15’ Klamath center console aluminum boat 1997 25 hp Yamaha four stroke (completely rebuilt in 2014 and has 5 freshwater hours in total on the motor and starts on the first crank) 1997 Pacific galvanized trailer (all lights running) Hummingbird unit with small sonar antenna Light up compass...

I have a 16” Mirrorcraft Aluminum Boat for sale. It is 73” wide and very deep. I installed the floor. Fresh carpet on floor and seats, Dual batteries with electronics on their own switches in a waterproof panel. Bilge pump, Lowrance Hook2 5 Fish finder. 6gal gas tank up front with lines ready to...

So i have up for sale a 1994 152 widebody valco westcoaster Trailer is a 1994 pacific trailer with perm tags. Outboard is a 1994 48hp spl Johnson Trailer lenth is around 20ft Motor start up and runs good. Registration is paid till 2021 Trailer is in good shape. Has 4 swivel chairs(going to...

Price: $1800 Hey guys, I knew this day would come but it came sooner than expected. Selling boat because looking to get out the hobby for a bit to start road racing. Bought this 6 months ago from owner who revamped the boat. Since I have bought it, I have added a Garmin Stryker 4 plus CV with a...

Hey all, Im in the market for a solid Bayrunner 17’ or greater. I’d prefer something in the 17’ / 18’ size, but I could go bigger for the right boat. Ideally turn key or close to it. Let me know what you have and hopefully we can strike a deal!!! :cheers: Dustin

If anybody has a skiff (projects are 100% welcome), or knows anyone that has one, give me a shout. Looking for something in the 16-18 foot range but am open to anything really. Doesn’t need a motor. If someone has got one laying around taking up space then let me know. Would also be willing to...

1997 Gregor Aluminum boat with 8 HP Mercury outboard two-stroke engine. Includes trailer. Just refinished the three seats with marine varnish. Two swivel captains chairs and fuel tank included. Very good condition - ready to go! Contact Dave (760) 371-5645 and I can send pics. $1900

Used but good condition Achilles inflatable dinghy. No leaks. Comes with electric pump, floor boards, oars, seats, and carry case. Ratings on picture. 10'. $650.00 obo. Mercury outboard on the boat pictured is NOT included (pic shows floorboard and seats). Motor Is available but currently...

i only have 2 aluminum rod holders left- 81/2 inches long by 2 inches wide- great for anyone wanting to add any to your existing rod holders— $13.00 each or make an offer for the lot— Please note that these rod holders do not have the plastic inserts and in the event you want to mount your rods...

SOLD please delete! Thanks bd

Aloha Looking for something simple to fish the bay in maybe go out a mile or two once in awhile. Budget is 3k let me know. Thanks

Super tight budget but we’re trying to get a skiff 14-17’ for $2,000 with some form of propulsion (even a kicker motor is fine) and must come with a trailer. Planning to use the boat around the bay and just outside the jetty Or If you guys have a small aluminum boat, either flat bottom or V...

Hello guys, I would like some help/recommendations on aluminum boat welders. Currently the boat is in Westminster Ca. It has been hard finding a welder that is able to redo my whole transom for my 17 ft bayrunner. The transom has a many holes from the previous owner installing who know what...

$4000-2018 Cyber Monday Blowout Deal #2 Dual axle ABTrailer Gold Series ABTrailer rated at 7500lbs Set up with 2018 VIN Sticker 7.5" Heavy Duty Aluminum Ibeam Frame x 21’ Frame (1) Set of Bunks Marine Disc Brakes with upgrade to Aluminum Calipers Upgrade to Stainless Steel Fastener Kit 14"...

13ft aluminum gregor with 15 horsepower 4 stroke engine that’s never been in saltwater and runs great $1,400 SOLD

SOLD! Sad and happy day today.

Hey everyone, went to take the boat out this weekend and found it full of fuel. Pulled the tank and it had a bout 10 pin holes in it, most were sealed up by the rubber strips that were holding the tank in. Anyway I weld aluminum so Im building a new tank out of .125 5052 and Im wondering what...

Guys, I’m looking for a center console aluminum, and I need a great deal. I’m in college, (marine bio actually, at UCSD) and I fished a 15’ Gregor commercially last year. My price range is about 5k, so obviously I’m not getting a 22 foot with a pilot house, but a nice hull, decent console and a...

SOLD NO TRAILER - NO PROBLEM *FITS IN A PICKUP TRUCK BED. *Does not need to be registered with DMV since it has no trailer and falls into the same category as a Kayak. *Light weight Aluminum Row Boat with WHEELS! The wheels make this girl easy for 1 person to roll down to the dock. Just...

Selling a 14 foot Gregor aluminum skiff Boat is decked out with: -Garmin fish finder -bilge pump -bait pump -running lights - new carpeting -plenty of storage in front and middle -6 rod holders -2 life vests -2 cushion seats -2 anchors -15 HP tohatsu 4 stroke engine This boat is turnkey ready...

Looking for a local shop to manufacture a Half-Top or T-Top for my Cabo 226. Used Pacific Yacht Tower in San Marcos in the past, quality work and craftsmanship but his prices are getting expensive. Is there anyone else out their in SoCal (San Diego, Newport Beach) that does good custom work...

This was the frst boat I ever bought, it is perfect for someone looking to do any sort of fishing, hoop netting, diving etc... Easy to clean, next to 0 maintenance, and perfect for a first-time boat owner. This is easily one of the nicest and the cleanest looking aluminum boats in San Diego...

2013 Suzuki 4 stroke under 100 hours, like brand new. Light weight galvanized trailer with shocks, fish finder, 25 gallon bait tank, new pole holders, anchor and chain, life jackets, portable hand radio, hitch and ball, fire extinguisher (charged), flair gun, running lights, remote control...

20ft aluminum Starcraft with low hours on a very clean 1989 3.0 mercruiser 140hp. Boat is set up for fishing with brand new lowrance fish finder. Fresh water or saltwater ready. Can go over 100miles on the 24gallons of fuel capacity. Can get to any off shore spot or island in sight! Coranados...

I have a 2901 Pilothouse and I would like to polish the door frame. It is aluminum. any recommendations?

Hi all, First off, I'm new to BD and loving the banter and insight. I'm hopeful you may be willing to share some of your experience and opinions here. I will be purchasing an aluminum boat by years end and am looking for input. I'm leaning towards buying new, in part, with end of month...

22' Rare baja bayrunner cuddy cabin with hard top rocket launchers Big fish holds GIANT bait tank in transom could be used for live fish operation leaning post with four rod holders and storage dual batteries outriggers are included but need mounts trailer just had new master cylinder/coupler...

2015 Tracker Guide V14, Aluminum Fishing, Equipped With A Mercury 15 Hp Four Stroke, Outboard, includes 3 Bench Seats, 4 Swivel Mount Rod Holders, 6 Gal Tote Tank, and 4 Cleats. Trailer Is A 2014 Fabrique, Painted Black, Single Axle. Trades Welcome. Come On In To Make A Deal! WAS Priced At...

2013 Lowe Fishing Machine 165 Pro-WalkThru, Aluminum Fishing Boat. Equipped With A Mercury 90 4-Stroke, Outboard, 90Hp With Only 47Hrs. Includes Am/Fm, Humminbird 597ci Internal GPS-Fish Finder, Cannon Downrigger, Livewell, Fuel Injection, Outboard Power Tilt Trim, Bimini Top, Boat Cover, Side...

Selling my 15 ft, aluminum fishing boat. It is a deep fishermen boat with a custom flat deck and storage containers. NO LEAKS! Equipped with gas tank, life vests, battery, oars, bilge pump, bimini top and a Honda 15 HP, 4 stroke electric start motor. This boat runs perfect. Have always had it...

I have a set of swivel break aways for any tower or belly hoop. Size is 1 1/2 inner Diameter and 1.9 on outter diameter. I didnt need them on my Belly Hoop. These sell for 150.00 each from any fabicator. The price for all 4 sets is 200.00 Thank you.

BOAT AND TRAILER ONLY, NO MOTOR Duroboat in like new condition with no pitting or cracks. Boat does not leak or take on water. -Stored in a garage, 2017 Tags -Substantially re-done in 2015 -Fuel Tank -Seat cushions -All safety equipment included -Bow and stern lights -Bilge pump -Custom battery...

Duroboat in excellent condition with no pitting or cracks. Boat does not leak or take on water. -Stored in a garage, 2017 Tags -Boat is turn-key and ready to use immediately. -Substantially re-done in 2015 -2015 Honda 20 hp with under 20 hours. Purchased from Eric at Specialty Marine and has 5...

I recently upgraded my boat and need to sell a nice 14' Klamath skiff. Boat is set up with a 15 HP Yamaha 2 stroke, runs great. Nice Calkins galvanized trailer. Boat come with Lowrance elite 4X fish finder and hookups for bait tank and battery. Great boat but no reason to have two boats...

Does anyone have a simple belly hoop for a hard top????