Search results

  1. tony38

    Anyone willing to rent big bluefin gear?

    fathom 60 2 spd load it with 100lb braid or the 40 ld 2 spd load it with 80 lb braid on a okuma pch rail rod, and you be out for about $800 and you are set for those big blues
  2. tony38

    Phenix Axis HAX720X3H 60-130#

    the rod was too heavy or the action of the rod?? looking into buy that model for 80-100 lb leader
  3. tony38

    HEY SANTA! Here's the PENN reel or rod I want under the tree this year!

    how about deleting or erasing the brain of those who are trying to take away sportfishing with that new reg. ,that are trying to pass for the sport boats, then you can drop a visx 20
  4. tony38

    yeah Im not affraid of pulling reels apart, I learn to service my own reels , at this point I...

    yeah Im not affraid of pulling reels apart, I learn to service my own reels , at this point I rather go to my local tackle shop and get some quality bearing for it
  5. tony38

    thanks, I got one of those in the box , my concern is that is a new reel and if is a problem...

    thanks, I got one of those in the box , my concern is that is a new reel and if is a problem that is happening as it was with "Q C" when the reel was missing the 154B washers, I mean new reel with a bad bearing
  6. tony38

    I guess I need to buy a new bearing

    I guess I need to buy a new bearing
  7. tony38

    yeap I know that , that is why I always make sure and double check the reel is in free spool...

    yeap I know that , that is why I always make sure and double check the reel is in free spool before adjusti g the drag , and with the picture you won't be able to see any damage in the bearing as it is a shield bearing
  8. tony38

    Fathom 40nld 2pds

    I open up my reel Fth 40nld 2spd, to verify that the 154b washers were there as I have a bit of free spool problem, the 154b washer were there, but the bearing in the metal drag plate is no bueno, not smooth as it suppost to be , feels like if it had dirty inside and it is a shield bearing, has...
  9. tony38

    deep drop for yellowtail

    On my HXJ Raptor , it's filled with 400 yards of 80 pro spec solid with about a 30 feet leader of 60lb mono on a phenix axis 720H2X good yoyo, drooper loop rig and heavy live bait rig aswell
  10. tony38

    post it on the Penn forum you will get a faster answer than here

    post it on the Penn forum you will get a faster answer than here
  11. tony38

    PENN Carnage III West Coast Inshore Rods

    when will the carnage 3 rail rods be at the local tackle shops in socal
  12. tony38

    AVET SXJ & LEXA HD 300 / 400

    what phenix axis model??
  13. tony38

    should be a great reel almost half the price od the accurates

    should be a great reel almost half the price od the accurates
  14. tony38

    Is Avet ever going to do the "T-RX" line

    in the smaller size like the 30 maybe a 20 or even in the HX line ??
  15. tony38

    I have mine filled with 500 yards of 100lb braid and 20 feet of 100 lb mono, the 3 feet of...

    I have mine filled with 500 yards of 100lb braid and 20 feet of 100 lb mono, the 3 feet of floro depends on what is needed on the trip you are on, but maybe between 60, 80 or 100 for sinker rig for live bait, if you are on the jigs I see the leader of 200-400 lb mono just so the fish do not...
  16. tony38

    you can have like a 10-20 feet leader of mono then the 3 feet of floro, that is how most...

    you can have like a 10-20 feet leader of mono then the 3 feet of floro, that is how most people are fishing now days
  17. tony38

    800L

    wish you where closed to LA county great great greaaaat price
  18. tony38

    yeap that fth40NLD2 load up with 500 yards of 80 lb pro spec braid anf can be fish between 50-80...

    yeap that fth40NLD2 load up with 500 yards of 80 lb pro spec braid anf can be fish between 50-80 leader no problem , I pair it with a phenix axis 720X2H
  19. tony38

    Sav o tackle , Santa Fe Springs

    Sav o tackle , Santa Fe Springs
  20. tony38

    Komodo 500?

    next in line
  21. tony38

    Gunmetal Makaira 16 SEA & 7' UC Centuar

    where in the IE are you located??
  22. tony38

    Gunmetal Makaira 16 SEA & 7' UC Centuar

    WHAT ELSE YOU HAVE ??
  23. tony38

    hey guys, can you used the alberto, rp knot

    i have done the braid to leader connection with the alberto knot with no fail, but the heaviest I done is 40lb, nothing over that so my concern is if that knot is good for 100lb braid to 80-100 top shots
  24. tony38

    that is true, but I can always practice over and over at home, I have a few scales I can use to...

    that is true, but I can always practice over and over at home, I have a few scales I can use to test the knot
  25. tony38

    hey guys, can you used the alberto, rp knot

    thank you all for sharing youe knowledge , I am a very rookie at the big stuff and wanna get as much knowledge as possible, before I get my first hook up
  26. tony38

    hey guys, can you used the alberto, rp knot

    for 100 lb solid braid to 80-100 lb mono or floro leader?? or which knot do you use for braid to mono
  27. tony38

    Baitcasters for Socal Calico and Yellowtail

    my avatar is a 28 lb yellowtail caught in the backside of Catalina Islan, lexa 300 HD blue version with 40lb braid and 20lb floro top shot on a Calstar gx8 rod
  28. tony38

    Gear dump, mak 20, tn16

    would you sell the axis 720 3x alone ?
  29. tony38

    working

    working
  30. tony38

    Skorext scammed me!!

    that is why I only do face to face to deals, its sad that has come to that, but most of us work hard to earn our pennies, for a low life to do this crap
  31. tony38

    Skorext scammed me!!

    find the pp account
  32. tony38

    Phenix Axis rail rods

    pm you
  33. tony38

    they put 400 yards of TT 60 HC on my mk10, so you were able to get just 75 more yards, that...

    they put 400 yards of TT 60 HC on my mk10, so you were able to get just 75 more yards, that don't sound right, most people are able to put 500 yards of 80lb braid give or take on the brand of braid
  34. tony38

    Okuma makaira 16ii sea set up

    I just purchase this reel tool, and at tackle shop were able to put 575 yards of 100lb power pro depth hunter, I believe is more than enough line and how the reel is build can fish 100lb easy
  35. tony38

    I bought the same reel and at the tackle shop, were able to put 575 yards of 100lb power pro...

    I bought the same reel and at the tackle shop, were able to put 575 yards of 100lb power pro depth hunter braid which change color ever 25 ft.
  36. tony38

    sounds like spj handle 2.0 update on the way 😁

    sounds like spj handle 2.0 update on the way 😁
  37. tony38

    Southern California phenix bd 700 xh

    the rod is in excellent condition , I would rate it a 9.5 , looking to trade for a axis 720 2x
  38. tony38

    phenix bd 700 xh

    tony38 submitted a new listing: phenix bd 700 xh - phenix bd 700 xh Learn more about this listing...
  39. tony38

    Wtb sxj raptor or g2

    lol I just saw that
  40. tony38

    Wtb sxj raptor or g2

    any color in particular?
  41. tony38

    for 1.5k you can get the Penn Fathom 25N 2speed and Penn 40N 2 speed thise reels will cover you...

    for 1.5k you can get the Penn Fathom 25N 2speed and Penn 40N 2 speed thise reels will cover you quite well, and you will have about $800 left for the rods and some tackle, for the rods you can go to your local tackle shop and pull on them so you can feel how it match with the reels
  42. tony38

    Other Hey guys need some advice

    thanks guys for the info and for taking the time to share your knowleged
  43. tony38

    will that rod fish 80 and 100 top shots?? moster fish🎣🎣

    will that rod fish 80 and 100 top shots?? moster fish🎣🎣
  44. tony38

    its not so much about the budget, but if their is a rod that can do the job at a lower cost , I...

    its not so much about the budget, but if their is a rod that can do the job at a lower cost , I mean sometimes it just the brand name that is a value, just like phenix psw rods and the daiwa proteus rods, if you take out the label is pretty much the same rod with the difference that daiwa is...
  45. tony38

    I was told by my local tackle shop that no shorter than 6 1/2 and no longer than 71/2 but a 7ter...

    I was told by my local tackle shop that no shorter than 6 1/2 and no longer than 71/2 but a 7ter would be ideal do to when the fish is doing the death circle to manage and be able to pull the fish away from the bottom of the boat , thank you for your info
  46. tony38

    Other Hey guys need some advice

    just bought a MK 16sea load it up with 575 yards of 100lb pp, need advice on the rod , would a 7 feet 3x rated 60-130 rod, be good to fish 80-100lb leader?
  47. tony38

    Pch rail rod

    any 3x??
  48. tony38

    ohh cool thanks for the quick reply , I forgot to mention that it was toro tamer their brand

    ohh cool thanks for the quick reply , I forgot to mention that it was toro tamer their brand
  49. tony38

    you have 500 yards of 65 on the mk 10 at charkbait they were able to load up just 360 yrds of...

    you have 500 yards of 65 on the mk 10 at charkbait they were able to load up just 360 yrds of HC 60, I guess I will be taking that off and use Izor
  50. tony38

    the mak's series comes with a 5 year warranty vs the 1 year with torque's and international.

    the mak's series comes with a 5 year warranty vs the 1 year with torque's and international.
  51. tony38

    Penn International 20visx

    is the rod available?
  52. tony38

    Reel and braid information

    mak 16ii SEa with 575 yards of 100 lb Solid PP depth meter mak 10ii SEa with 360 yard of 60 white HC toro tammer
  53. tony38

    well said, yeah commercial takes all no size limit or limits per day and then they put the blame...

    well said, yeah commercial takes all no size limit or limits per day and then they put the blame on the sport , private fishing community
  54. tony38

    Tranx500 HG

    tony38 submitted a new listing: Tranx500 HG - Tranx500 HG Learn more about this listing...
  55. Tranx500  HG

    Southern California Tranx500 HG

    used 2 times on full day to catalina wash and dry after each use no fish caught on it filled with 290 yards of 65 lb yellow pp braid. 9.5 cons and a 10 mech, asking $480 all papers and stuff in the box bought, face to face deal , Downey Area
  56. tony38

    Newer reel equivalent to Trinidad 20?

    Penn fth 25N greatbreel for the price
  57. tony38

    tranx 500HG

    🐟
  58. tony38

    Navagante boarded by fish and game today

    All the landings I been, they ask if you need a fishing lincense at the time of checking and as you are boarding the boat the crew members do ask, but there are always a few who try to sneak without a day lincense.
  59. tony38

    Wow look at this ish

    this sounds more of a Chevy sale commercial than a reel for sale lol🤣
  60. tony38

    👍

    👍
  61. tony38

    Frame problem Fath25NLD2

    May be TUNA NORTH can help you out with it, any word from Penn yet??
  62. tony38

    Penn INT16VISX International VISX Trolling Reel

    great price wish it was silver
  63. tony38

    tranx 500HG

    🎣
  64. tony38

    not only that, I seen many many popular sport boats gets in the private boaters chum and almost...

    not only that, I seen many many popular sport boats gets in the private boaters chum and almost hit them while the private boater where there first , whats up with that
  65. tony38

    tranx 500HG

    tony38 submitted a new listing: tranx 500HG - tranx 500HG Learn more about this listing...
  66. tranx 500HG

    Southern California tranx 500HG

    used 2 times on full day to catalina wash and dry after each use no fish caught on it filled with 290 yards of 65 lb yellow pp braid. 9.5 cons and a 10 mech, asking $480 all papers and stuff in the box bought, face to face deal , Downey Area
  67. tony38

    Penn Torque 25NLD2

    has the price drop since the last pic taken??
  68. tony38

    Accurate Valiant 800 2speed

    question did Accurate replace the ARB too or just the gears
  69. tony38

    Need advise , opinions, experiense

    Thanks guys for the quick input , yes thats what I was thinking, that is better to have dogs than just ARB , now I have more confidence on what to look when buying a high end reel , ones again thank you all for sharing your knowledge
  70. tony38

    Need advise , opinions, experiense

    ARB vs rachet dog , example accurate's ARB vs lets say Penn torques double dog system. just trying to learn more from people who has more knowledge than me thanks
  71. tony38

    looking to trade tranx 500 HG

    tony38 submitted a new listing: looking to trade tranx 500 HG - looking to trade tranx 500 HG Learn more about this listing...
  72. tony38

    Southern California looking to trade tranx 500 HG

    for a penn torque 25N 2 spd or 40 in the silver color , tranx was used 2 times with no fish at all ,bought it last dec. fill with 290yards of 65 pp yellow , box and all papers still in the box, pm # to send pics but its a solid 9.5 looks and 10 mech
  73. tony38

    "Intrepid Fan" if you buy a brand new car out the dealer, $100, 000 car and the engine breaks...

    "Intrepid Fan" if you buy a brand new car out the dealer, $100, 000 car and the engine breaks down at 10,000 miles not your fault, you expect the dealer to take care and fix it, "RIGHT" or are you going to spend 30,000 out of your pocket to fix it. IM sure you expect the dearler to stand...
  74. tony38

    you mean the way they smoke the meat patty lol

    you mean the way they smoke the meat patty lol
  75. tony38

    for a $500 reel , it better be as advertise metal frame and side plates , not color coated...

    for a $500 reel , it better be as advertise metal frame and side plates , not color coated because that is false advertisement
  76. tony38

    always does, all metal frame and side plates, false advertisement

    always does, all metal frame and side plates, false advertisement
  77. tony38

    Custom wrapped Seeker 270-8

    where in Socal are you located?
  78. tony38

    Gear recommendations for newbie

    you can go 40lb leader or even 50 for irons as its more of a reaction bite, my setup for surface iron for yellows its a lexa 400 filled to the top with 50lb braid and about 5 feet of 40lb mono on a 8ter rod rated 40-60
  79. tony38

    Gear recommendations for newbie

    go to the classified and look for a penn fth25 2 spd most time its filled with 65lb braid, its a great all around reel that can cover you from 25-40 lb leader and a rod in the 8 feet rated 20- 40 or a bit heavier and you be in the game
  80. tony38

    Problem with Daiwa Lexa HD series...also Daiwa service experience

    I have a lexa 300 hd and 400 hd with the 7.1 gear and never have had any issues at all til now, 3 years old reels
  81. tony38

    keep us posted on what was causing this problem

    keep us posted on what was causing this problem
  82. tony38

    lol yeap , I bet they wouldn't , its sad that SHIMANO ignore the other part that keeps the...

    lol yeap , I bet they wouldn't , its sad that SHIMANO ignore the other part that keeps the company growing, that is ALL THE PEOPLE THAT FISH THEIR PRODUCTS
  83. tony38

    Shimano Tranx 500 and Shimano Trinidad A out of stock

    Shimano is more concern with there bike team , than fishing , just search for the youtube video of J&H tackle where josh reads the letter from Shimano, it clearly said Shimano number 1 priority is "TEAM BICYCLE SHIMANO" no where in the letter they mention the fishing community, that tells you...
  84. tony38

    I see the classified its going backwards

    now you can see other people post in the ad, as it was before, good job let hope now it can make a just fishing reel, rod, jigs, etc.forum as it was before
  85. tony38

    Is Penn making more HD Line spoolers??

    trying for get one , but everyone is out of stock?
  86. tony38

    Phenix Abyss 809 for 40#

    softer tips helps with those head shake, specially now days that most fish with straight braid and short top shots
  87. tony38

    Shimano Tranx 500 and Shimano Trinidad A out of stock

    yeap, I know that but as a company that is in the fishing ind. too , would be nice to take note of the loyal fishing people that shimano has aswell not just the bycicle , I don't think it was difficult to add a few more words to that letter "SHIMANO FiSHING TEAM" just saying
  88. tony38

    sucks that Shimano just care about their "TEAM SHIMANO BYCICLE " , no where it in metions the...

    sucks that Shimano just care about their "TEAM SHIMANO BYCICLE " , no where it in metions the FISHING community , just mentions twice the BYCICLE TEAM 🧐🤔
  89. tony38

    advice and opinion on Accurate Bv2 500N and 500 vs Penn Torques 15XN and 25N 2spd

    seems Penn is wining , I see that the torque frame is more robust than the bv, thank you all for the info, keep it coming
  90. tony38

    advice and opinion on Accurate Bv2 500N and 500 vs Penn Torques 15XN and 25N 2spd

    I seen both brands at my local tackle shop and the only thing I don't like about the BV2, is how thin the frame is on the handle side, and how side plate is attach with 3 screw at the location of free spool, and just 1 where the gear box is if that make sences, have you had any issue with that...
  91. tony38

    advice and opinion on Accurate Bv2 500N and 500 vs Penn Torques 15XN and 25N 2spd

    looking to buy a set of these 2 reels, but would be great if I hear from people who actually have them and use them, kind like cons and pros view , thanks in advance for your opinions
  92. tony38

    What NEW reel/rod models would you like to see from PENN?

    40XN 2 SPD when is coming out ??
  93. tony38

    We've made upgrades! Click here to learn more and tell us what you think.

    what are all this "OLD CLASSIFIES" for ,with respect should have kept like it was ,just updated the rules in my opinion
  94. tony38

    Accurate Hello everyone , I'm in the market

    500 yards of 65 thats plenty of line for most situations , thanks for the info much appreciated
  95. tony38

    Accurate Hello everyone , I'm in the market

    cool , I know is not good to push anything above the normal limits, but is good to hear of what these series of reel are capable of doing, thank you for your respond and info about the reels, I'm thinking about the bv2 600 , and the 600NN
  96. tony38

    Fathom 15xnld2 or 15ld2 for 20-30#?

    I enjoy my 15ld 2spd ,rod is a phenix psw 8ter mh rated 15-40. fish it between 15- 30 lb topshot very well ,I have it load it with 340 yards of 40lb pro spec braid
  97. tony38

    Accurate Hello everyone , I'm in the market

    to buy my first accurate reel, and I been looking very hard at the bv2 ,my question have any one have had any problem with frame flex and the ARB
  98. tony38

    Classifieds?

    why why whyyyyyyyyyyyy😫😫😫😫😫
  99. tony38

    Surface Iron or Yo-yo Iron

    by the shape of the belly, looks like a surface jig, the yoyo jigs I have, they have full belly if that makes sense
  100. tony38

    Where are the sales in OC/LA?

    BOB'S SAND TACKLE , is been having one for a while
  101. tony38

    UC Swimbait Finatic 711L thoughts?

    don't own that rod, but I have a calstar gx8 which I bellieve its rated the same, pair with a lexa 300 with a 20lb top shot and have caught many yellows at 20-28 lbs, not an easy job but can be done.
  102. tony38

    U.C. RGP 900 9E FACTORY WRAP AND GP 9 E BLANKS IN STOCK AND ON SALE. SALE ENDING 3-31-2021 PLEASE CALL THE STORE FOR INFO AND ORDER

    now thats what we need, hope the rest of the tackle shops follow. thanks BOB SANDS TACKLE for great deals
  103. tony38

    have these few reels

    p.m. answer Derek
  104. tony38

    have these few reels

    1- Avet hxj raptor silver filled with 80lb pro spec braid about 370 yards , looks it's a solid 9.5 no boat rash mech its a 10 "no box " $370 2- Daiwa bg 5000 ,fill about 2/3 of 50 pp green looks its a 9 and mech a 10 $80 I have problems uploading photos, so plzz pm your # so I can send...
  105. tony38

    Favorite setup for 30# bait?

    calstar 270 H 8 with a lexa 400 filled with 50lb braid short top shot 6' of 30lb floro, light strong and fun to fish all day long
  106. tony38

    Captain charged with Manslaughter

    Is this the boat where only the crew and Captain survive?
  107. tony38

    Avet sx Raptor vs Trinidad 16na????????????

    Trinidas have much more plastic pieces in them than Avets do, that might be another big difference
  108. tony38

    Daiwa Lexa Winn 300 Hsl-P with upgraded drags , machined plate and fresh braid

    you mind if I ask what's the max drag now with the upgraded drag?
  109. tony38

    Newer upgraded Daiwa Lexa 300hd

    any reel if you fish it to their max limit is going to fail , no matter what brand is, I don't see anyone driving their cars to the highest rpm , you will blow that engine up , and any brand once they discontinue a reel will have part for a certain of years then you are out of luck , just ask...
  110. tony38

    Newer upgraded Daiwa Lexa 300hd

    yeap it cast very well , I have it load it with 40 lb braid and about 6 feet of floro topshot , top shot between 15 to 25lb max
  111. tony38

    Newer upgraded Daiwa Lexa 300hd

    i have the blue 300 HD model , great little reel pair with a calstar gx8 rod , got that yellow in the avatar with no problem. never had a problem with the reel clutch poping into grear when casting
  112. tony38

    8’ Bait Rod recommendation

    i have a calstar gx8 with a lexa 300 great setup , caught that yellow on avatar with it no problem
  113. tony38

    Going on Pursuit 22nd Street Landing

    great boat , crew and capt. always do their best to put you on the fish, right now I believe they are taking 28 anglers only so not bad at all
  114. tony38

    When is the fathom 15 ld narrow become available

    15 ld 2spd, sure it will give the Avet sxj a run for its money if its a true 15 narrow ,not like the troque 15 extra narrow which is more of a 25 extra narrow
  115. tony38

    Is there a rod clamp that would attach a Daiwa Lexa 300 to a deckhand grip rod?

    I have my lexa 300 on a calstar gx8 with a trigger reel seat , honestly I feel that reel seats are more secure than rod clamps, 1 reason not crushing the blank overtime
  116. tony38

    Saw the PURSUIT off Catalina

    the boat is big enough to carry 12 people 6 feet apart.
  117. tony38

    Freedom Boat Club reviews?

    GUYS SHOULD ASK "SERGIO" FROM ANGLER CHRONICLES
  118. tony38

    Thoughts on Jig?

    could add a skirt and some glow in the dark , a ling killer for sure
  119. tony38

    New Calstar GFDH 90J

    lol, hope you got the joke bro good price on a great rod
  120. tony38

    New Calstar GFDH 90J

    Do you have the box?? 🥴
  121. tony38

    New JX Raptor line suggestions

    most peoole will fill up the jx raptor with 65lb braid to the brim and a short leader of your choice , I like pro spec braid very smooth and holds up very well too .
  122. tony38

    Lexa 300 part

    "Charkbait" might have some parts.
  123. tony38

    Okuma Makaira 30ii SEa

    what lb braid and how many yards of it, whats the price you are asking for??
  124. tony38

    Daiwa Proteus WN or Phenix Black Diamond

    I have a phenix psw909mh and the daiwa proteus 8 mh "NOT WN"and both are very similar build , i would say if they didn't have a label on them both would be a phenix or daiwa.. daiwa is less money
  125. tony38

    San Diego Tackle Traders Got Hit Again.

    worst part is that they can't track the gear, the shop needs a good alarm system with some hide loud speakes inside and outside the shop
  126. tony38

    what would be a nice rod match

    for a daiwa bg 5000 , planning on fishing 25-30 lb top shot , thank you in advance for your input on the rod
  127. tony38

    Yellowtail/ Tuna Reel Recommendations Under $200

    daiwa bg 5000 backed with 50 braid
  128. tony38

    Seeker blank - Albino D8 - More Trades!

    how does anyone knows about the blank ? do they have some soar of stamp with the info about the blank, always wonder about that , I'm fairly new, that's why I'm asking
  129. tony38

    phenix 909h reduced

    is a black diamond ??
  130. tony38

    40lb set-up suggestions

    i have a phenix psw700 xh pair with a Avet raptor mxj 380 yards of 65lb pro spec braid and chance the top shot between 30 and 50 lb leader so far works great, light and strong
  131. tony38

    Phenix UMBX 703XH

    deckhand or reel seat ??
  132. tony38

    Ok, so what is your favorite reel for throwing surface irons and why?

    penn jigmaster narrowed to 99 special fill with 30lb mono cheap, easy to fix and last for ever
  133. tony38

    New PENN Torque TRQ15XNLD2

    that 15N looks more like a 25N extra extra narrow , wish they would do the same to the 40N
  134. tony38

    Price For Avet SXJ Raptor ??

    sxj raptor its a bad ass little reel
  135. tony38

    SILVER TORQUE

    NO FREE BRAID FILL UP
  136. tony38

    Will Avet Produce Single Speed Raptor?

    just wait for the star drag :-)
  137. tony38

    AVET MXL MC - lightly used silver

    what's the gear on the lexa 300 Hd ?
  138. tony38

    Happy Resurrection Sunday

    JESUS, LORD of LORDS
  139. tony38

    New star drag

    Right out of the box no tricking it out ,plus MADE IN USA
  140. tony38

    New star drag

    waiting for the "HXJ star drag" i think it would be a killer reel , cheaper than all those used trinis 40n and BETTER BUILD
  141. tony38

    BNIB TranX30HG

    or atleast ask with respect in public like " would you take best offer" after all I don't see that your price is set firm.
  142. tony38

    "Preferred" Braid?

    berkley pro spec smooth and holds well IMO
  143. tony38

    Avet reel models: seriously confused

    the regular models are like the base models the g2 models are like the sport edition the raptor are the super sport in the regular and g2 you can choose your trim model where the raptor has all the goodies
  144. tony38

    New star drag

    Hope they do the hxj on star drag to give that trinidad 40N a good fight
  145. tony38

    Shimano Braid for trance 500hg

    pro spec braid thin smooth and holds much better then pp in my opinion
  146. tony38

    Must have set ups

    3 setups #1) raptor sxj top with 50lb braid, short topshots between 15-30lb fluoro, 8ter rod rated 15-40lb #2) lexa 400 top with 50lb braid and 40lb topshot for surface jigs with an 8ter rod rated 30-60lb #3) raptor HXJ top with 80lb braid and 50lb topshot yoyo dropper loop rig with a phenix...
  147. tony38

    Lost Gear/Tackle

    lost or stolen? any photos of how the rod was wraped will help
  148. tony38

    Shimano Tranx 500 HG VS. PG for iron

    if you're worry about fighting a big fish on the HG, use the rod to lift the fish up then reel as you drop the rod..
  149. tony38

    Sxj spooling

    i have about 250 yards of 50lb pro spec braid thin smooth and holds up very well, short tops from 15 -30 lb
  150. tony38

    Re sold

    is the lexa 300 with the power handle gone???
  151. tony38

    good morning to all, what are your thoughts

    thanks guys for the input , thats what i wanted to hear, not just a test on a machine , nothing compare to the real time use on the water
  152. tony38

    good morning to all, what are your thoughts

    on the FG knot, heaviest and lightest line you would use it and how strong it really is. i seen videos on youtube and done it, seem to hold good but never use in the water
  153. tony38

    Avet SXJ G2 line choice/capacity

    i have the sxj raptor spooled with 250 yards of 50 pro spec with that same rod, love the setup light and strong
  154. tony38

    2 reels, 2 rods - which goes where?

    i would put the avet mxl on the phenix rod and the torium 20 on the calstar as your jig setup, the torium has more drag power plus the torium will be easier to cast aswell , and the avet mxl on the phenix could be your live bait setup in my opinion...
  155. tony38

    Reel and braid information

    sxj 240 yards of 50lb pro spec mxj 380 yards of 65lb jerry brown hxj 400 yards of 80lb pro spec lexa 400. 280 yards of 50lb pro spec tranx 500. 320 yards of 65lb yellow pp penn fth15 2spd 260 yards of 50 green pp short tops change as need it, all braid spooled done at the tackle shop....
  156. tony38

    SXJ 2 speed Rod Selection

    I have my sxj on a phenix bd psw909 mh, love it how it cast small dines,swimbaits and small surface jigs too. caught a few 10 -15 yellows no problem
  157. tony38

    \SOLD

    sorry John, i realize see it's a lefty, but looks great and great deal sure won't last log
  158. tony38

    \SOLD

    where in cerritos are you located, and when was the last time you open it up for service?
  159. tony38

    First and most Merry Christmas to all

    i reccieved a tranx 500 hg as gift, and wanna upgrade the drag washers from the start, one knows if there's any beside the stuck ones?
  160. tony38

    WTS: Talica 10ii LIKE NEW $350

    ohh that could of been the difference in material in the gears, shimano brass , avet steel, and not actual binding
  161. tony38

    WTS: Talica 10ii LIKE NEW $350

    binding on the raptors? where you max out on the drag, asking because i have 2 avets raptors and with the proper drag i dont feel any binding at all, also have one talica and same no binding , now if i push them above whats normal both reels bind
  162. tony38

    New pro gear reels?

    hope they make it like the trinidad 40N , that way that trinidad will be out of service and high price lol
  163. tony38

    Multi colored braid?

    colored briad line , is to help you know how deep in the water colum your bait or jigs is instead of guessing, color change ever so many feet.
  164. tony38

    Shimano Turner's Norwalk My new ugly Shimano

    "SAV O TACKLE" great service and do things right all the time and they have salt and fresh water gear so you're cover with any fishing need
  165. tony38

    Phenix Black Diamond PSW760M

    does the 909hxj has a reel seat?
  166. tony38

    Check out my 3 month old Lexa 400HD

    i do my own maintenance on my lexa 400 its about 3 years old and service lets say every 4 months and never seen that much damage on mine, other thing that could help its bush a bit of grease on all the inside it helps alot and no doesnt affect the drag
  167. tony38

    AVET REEL

    sxj raptor , 300 yards of 50lb braid and short topshot leader from 15lb -30lb on a phenix 909mh, is what i used and it covers all that pretty well.
  168. tony38

    Least amount of rods for SoCal fishing

    i have 3 setups , but always use 2 of them 1) avet sxj raptor filled with 300yards of 50 pro spec braid on a psw909 mh rated 15-40 can use that setup from 20 - 30 lb short leader 2) avet mxj raptor filled with 400 yards of 65lb, on a psw 809 h rated 20-50, it double as a bait, jig setup leader...
  169. tony38

    Reel recommendation for Daiwa Proteus 76MH

    try the avet sxj nice ,small with guts for 20-25 lb leaders
  170. tony38

    Avet HXJ raptor versatility

    isnt funny back in the days before the 2 spd reels revolution everyone was crying for the low gears and a reel that was 4.1 to 1 gearing was the hot stuff. i was thought to lift the fish with the rod then crank as you lower the rod . most people are forgeting the purpose of the rod
  171. tony38

    question who was first making the

    oh , I knew about newell but I thought Accurate was before tiburon and didnt know that Accurate was a subcontractor for Tiburon, thanks guys always leaning new things here :)
  172. tony38

    question who was first making the

    aluminum frame and spools for the penn senator 4/0 aka yellowtail special, Accurate or Tiburon? , I just watched a video and they only mention tiburon
  173. tony38

    Wanting New 30 lb setup

    for your budget , you can't go wrong with the penn ftm 25N 2spd spooled with 50lb braid and a short leader as you need it
  174. tony38

    Better rod or reel?

    many of us have got caught up in the high end tech reels and rods, but the good old penn 500 and the ugly stick rods have caught tons of fish and leave you with plenty of money for a few trips
  175. tony38

    which Avet to fish 20# & 30#-40#

    i use the sxj raptor fill with 50lb braid and topshot 20--30 on a psw908mh, and the mxj raptor fill with 65lb braid and topshot 30- 40 on a psw700xh so far doing great both of the setups
  176. tony38

    Tranx400h

    SAV O TACKLE has all models plus free braid fill up
  177. tony38

    Avet mxj raptor question

    i got closed to 400 yards of 50 pp braid. i think its a great reel and yeah you can fish it from 25 to 50 lb top shot . i hear alot of people fighting the fish with the reel. i was thought to lift the fish with the rod then crank as you go down even a half turn counts
  178. tony38

    WTS:okuma komodo ss 463p

    do you mind if I ask what's the reason you're selling it.
  179. tony38

    3 Phenix Rods , 1 Shikari Rod, 2 Komodo SS 463P's

    do you still have the komodo ss with 40 braid?
  180. tony38

    phenix rod or calstar

    go with the 700 xh on either brand will work, remember if you are yoyo jiging, you dont need to cast far, the shorter the rod the more pulling power you get without hurting your back. As far as bait goes im guessing you will be using the bigger baits, so they will be able to swim on the heavier...
  181. tony38

    Happy Thanksgiving to everyone

    Happy Thanksgiving Andy to you and all your love ones , thats right may GOD keep blessing the whole world specially the ones in more need than us
  182. tony38

    Offshore Ethics In Fish Count Reporting

    im not offending anyone just saying what i have seen, i dont see how can that be a mistake doing it over and over, the landings need to be honest with their costumer and need to be remind that we put the food in their table
  183. tony38

    Offshore Ethics In Fish Count Reporting

    i seen reports on 976- from different landings and ofcourse totally different boats with the same picture of the same people with yellowtail, how can the same person be in oxnard and in 22nd landing same day and it happens more often than you think o_O
  184. tony38

    NIB WTF?

    i have a penn fth 15 2 spd and dont see a sn# anywhere either nor in my lexa 400 are these reels cheapies or copy cats :(
  185. tony38

    New G2's??

    :(
  186. tony38

    New G2's??

    better yet when and how are they going to pick the winner for the contest ,you shloud play who knows maybe you win a free reel
  187. tony38

    HXJ Raptor - Line Question

    I bought the same reel at sav o tackle and they load it up with the same braid berkley pro spec very smooth braid and they were able to put 400 yards
  188. tony38

    NIB WTF?

    ohh man you shouldnt have said that all you had to do is put it up for sell with tittle "BNIB" never been mounted on a rod or have seen water
  189. tony38

    NIB WTF?

    just dont throw the box away and the goodies , then posted as "BINB" LOL :)
  190. tony38

    NIB WTF?

    do all reels, rods have sn#?
  191. tony38

    NIB WTF?

    they were "broken in" "robbed" with what they said someone took about 100 high end reels all brands
  192. tony38

    NIB WTF?

    FISN N' FOOLS got hit saturday with about 100 high end gear
  193. tony38

    NIB WTF?

    now it makes sense why some guys are so concern when buying a used reel, they want the box and all the goods aswell, lol want to resale it as NIB NEW NEVER SEEN WATER OR MOUNTED ON A ROD lol
  194. tony38

    NIB WTF?

    how many of these sellers here are on those tournaments? just asking :)
  195. tony38

    NIB WTF?

    yes it matters if its stolen,, no bueno
  196. tony38

    NIB WTF?

    good one , and you see most of them being the same persons selling new rods and reels woder whats going on.
  197. tony38

    The New Avet G2 Series

    when and how are they going to announce the winner?
  198. tony38

    Avet 3 speed Jx raptor

    i was thinking of leaving the high 6 alone and just change the 3 to a 1
  199. tony38

    Avet 3 speed Jx raptor

    ohh ok, how about just changing the 3 to a 1 gear instead of having 3 spd less moving parts inside to fail
  200. tony38

    Avet 3 speed Jx raptor

    what about using the rod and the boat as help, when the boat moves up you lift and when it goes down you crank , i mean 3 gears already or maybe changing the gear from 3 to 1 in the lower and leaving the high as it is. on the hx 5.4 high and 1.9 low I think its good enough
  201. tony38

    Penn Fathom 15 capacity

    i got the fth15 2pd with 280 yards of 50 lb original green pp with some room for a 20 -25 lb top shot if that helps in anyway
  202. tony38

    why is there no daiwa forum like

    thank you Matt86m for answering the question
  203. tony38

    why is there no daiwa forum like

    yeah thats funny, maybe I had bad luck as many here with SHIMANO , that's why I only buy AVET now no need to be updating the reels every few years :) anyways seems there is no answer as why there's no DAIWA forum here thanks everyone for your reponds
  204. tony38

    why is there no daiwa forum like

    Gerry I had one of the 1st gen. toriums and I contact Shimano to get some parts and was told by one of their reps. that they dont repair them anymore. i dont think thats good service
  205. tony38

    why is there no daiwa forum like

    Gerry just like you I read the articles that people post here, Im sure you have had good luck with shimano service , but im sure there's also people who have had negative luck with shimano aswell, all i wanted to know why is that there's no Daiwa forum
  206. tony38

    The New Avet G2 Series

    "Bloody Neptune"
  207. tony38

    why is there no daiwa forum like

    yeah what's that reason Steve? Mark i have heard bad things about shimano customer support and they still have a forum here so whats with that.
  208. tony38

    why is there no daiwa forum like

    penn, avet, shimano accurate? just wondering why is the daiwa not here in BD?
  209. tony38

    Okuma Citrix vs Daiwa Lexa

    i can speak for the reg. lexa400 , i have had that reel for 2 years no problem at all , biggest fish a 28lb yt no problem
  210. tony38

    The New Avet G2 Series

    nice colors, the most important question PRICE on them? RED DAWN
  211. tony38

    Which reel?

    nobody thought they would show up this year and look what happen, i think they would show up for a few more years as the weather is changing so it fishing too
  212. tony38

    Which reel?

    he mentioned BFT so thats why I advice the raptor , but yeah if hes only going for the 1/2 to 3/4 boat trips he really dont need any of the high end gear , a penn fth 25n would be a great match as well
  213. tony38

    Which reel?

    i believe 30 would be the max of that rod just my opinion . i have a 8ft rod rated 20-40 with an avet mxj raptor filled with 350yards of 65lb braid and i change the leaders from 25-30lb floro
  214. tony38

    Which reel?

    hi well if you are planning in the bigger yt and bft you will need a heavier setup, fishing 40-60 lb leaders, my setup for that is a phenix psw700xh and an avet hxj raptor, so far caught yt around 30lb no problem with that reel, i can go up and down on the leader as needed
  215. tony38

    GF800ML for Linda Shaw

    beautiful work
  216. tony38

    Imagine casting this to yellowtail.

    you better not snap that line when casting
  217. tony38

    WTS Accurate BV Valiant

    does it compair to the avet sxj in size ?
  218. tony38

    Brake disk/ Pinion gear stuck?

    i would not fish it and send it to Avet with a copy of your reciept , im pretty sure they will fix it or give you a new one call them up
  219. tony38

    hi guys i need your opinion about

    i know its over kill for 25-30lb , i just wanna be able to push the drag without having the issue of the reg. avets binding when push a little higher. thank you all for the quick reply and keep adding, the more i hear the more i learn
  220. tony38

    hi guys i need your opinion about

    the avet sxj raptor back with 50 braid, fishing 25 -30lb short leaders, bait and light megabait
  221. tony38

    f/s TranX 500PG $380

    just asking whats the deal with the boxes? do they increase the value of a reel?
  222. tony38

    40-60lb reel

    hxj raptor i have it on a phenix psw700xh really like the balance between both
  223. tony38

    Stolen Gear

    facebook has a few pages where people post fishing gear for sale and swapmeets too, dont hurt to look there as only you know your gear, you know little ding here and there like fingerprints, good luck
  224. tony38

    West coast wahoo rig

    my setup for yoyo its a phenix pws700xh with an avet hxj raptor fill with 80lb braid with a short leader of about 5ft of 50 or 60 lb either mono or flouro as for jigs salas 6x jr is one of many fav. screamble egg color ,blue and white , mint, just to mention a few colors. and they way you fish...
  225. tony38

    Shimano hey guys i have a question regarding the tranx

    is the frame and side plates made of aluminum or plastic, carbon fiber, etc. thanks
  226. tony38

    Anything NEW at ICAST..???

    HXJ star drag to go against the trinida 40N , i think that would be great reel
  227. tony38

    Stolen/lost rod and reel

    this is getting well to common stealing fishing gear damn it, whats next putting lowjack or gps in the rods and reels to track them >:@
  228. tony38

    Like new Pro Gear V50 and V40 upgraded version

    what are the upgrades on the 2 that you are selling?
  229. tony38

    FOR SALE PRO GEAR CS551

    is these the narrow version ?
  230. tony38

    Newbie seeking advice for loading a reel

    i hear you on the budget, sometimes you see great deals here in the sell forum just keep an eye open
  231. tony38

    Newbie seeking advice for loading a reel

    get a decent reel like a penn fth. ,daiwa saltist, shimano torium, all good reels to fish between 20 to 30 lb tops around $200 or less. get the 25n size reels fill with 50lb braid. i learn the hard way well i was new to the hobby back then and by no means im an expert, but i saved a got me a...
  232. tony38

    hi guys would a lexa 400 be a good pair

    lol Jim I never said i was going after bluefin tuna with that setup, just want to get adviced by more experience people on that setup and how would they used it, but great point and thanks Jim well appreciated
  233. tony38

    hi guys would a lexa 400 be a good pair

    yes Carl its a pws909mh rated 15-40 line and thanks so it would be better paired with the lexa400 thanks Rob yeah I like the lexa 400 it works well and for sure I will have problems hooking a brute fish with that lenght of a rod on it but I bet it will be fun, you know sometimes you need the...
  234. tony38

    hi guys would a lexa 400 be a good pair

    for a psw909mh , or would the penn fth15 2spd would be better and how would you guys fish it bait, light jigs , whats your advice, opinions thanks
  235. tony38

    Sx raptor or mxj raptor

    i have the mxj with 400 yards of 65lb braid and change the topshot as i need it ,pair with either a psw700xh for dropper loop or yoyo jig or i can put it on my 8ter for surface jig or live bait , Mark and Dan have a great point
  236. tony38

    Shimano Chovy

    Hi Tim i got a great deal on a little penn fth 15 2spd load it with 50lb braid then change a short topshot as need it ,match with a phenix psw909mh line rated 15-40 love that light yet strong setup light tip with decent backbone on the rod and the drag of the reel its very smooth so far i have...
  237. tony38

    Reel for 3/4 to 1.5 day trips?

    have a look at the new progear reels at charkbait
  238. tony38

    JX Raptor or HXJ for local 50lb yoyo/dropper loop setup?

    I own the hxj and like it, the high gear its about right , remember sometimes you dont need to crank that jig too fast or else starts to spin and the lower gear its useful when you hook a tuna instead of the yellow and start doing the tuna circle
  239. tony38

    Shimano/Penn Reels For Sale

    got any braid under the mono on the penn fth 25n and where in the OC are you located
  240. tony38

    Hey guys for those who have a shimano tranx

    Is the frame and side plates made of alumium or its like the old toriums where they had plastic under the cover of thin metal
  241. tony38

    Noticed some changes :)

    ohh thanks for the tip Bill i never thought about it thank you
  242. tony38

    Noticed some changes :)

    thanks my reels are free of corrosion i clean them every 2 trips since they are very easy to take apart
  243. tony38

    Noticed some changes :)

    what would be an upgrade pinion bearning for the hxj and mxj raptors? i think the pinion bearing on my mxj its bad because it feels kind of hard to turn the handle even with minimum drag apply
  244. tony38

    Improved Clinch Knots??

    from right to left i would say the #2!!
  245. tony38

    SOLD

    are both rods wrap the same?
  246. tony38

    # Setups

    well for 40# 50# i bought the avet hxj raptor and for the rod i bought an used phenix black diamond psw700xh great setup , i bought the hxj at sav on tackle got a deal they fill the reel with 80# pro spec braid for free 440 yards, i have heard good feedback about the penn fth 40n 2 spd too i...
  247. tony38

    # Setups

    i think your current reel and rod its good from 25-30 even 40 lbs leader , as other state put some 50 or 65 lb braid to about 1/8 of the spool edge that will give you room to change your leader as you need to go light or heavy, then i would recomend a larger reel and a 7' rod in the heavy or...
  248. tony38

    rod advice

    im guessing you are going to use that reel to fish 30# 40# mono and heavy rod in the 7' would be great lots of good brands on rods out there it narrows to your choice, but try to go to a local tackle shop so you can pull on some rods and see which one feels good for you
  249. tony38

    Fishing Swap Meet - Canoga Park

    great thanks for the update
  250. tony38

    how strong is the perfection loop

    thank you all for taking the time to reply , yes it looks like its better to get those ring hook than maybe loosing the trophy fish
  251. tony38

    how strong is the perfection loop

    thank you all for your feed back
  252. tony38

    Offshore Stolen gear, wrong forum, I know, but trying

    one thing i missed is that you said it was a secure underground parking , is there any video i bet it should be
  253. tony38

    Offshore Stolen gear, wrong forum, I know, but trying

    check craigslist and were the rods custom made or factory as if the were custom made it would be a bit easier to track and sorry for your lost seems that lately is fishing gear getting hammer all over
  254. tony38

    how strong is the perfection loop

    so its a weak knot to be fish for live bait , i was thinking of using it instead of buying ring hook
  255. tony38

    how strong is the perfection loop

    and how light, heavy will anyone use it. and how would you fish it? thanks
  256. tony38

    HXJ&HX RAPTORS ADVICE

    i bought the hxj raptor at sav o tackle and they put 440 yards of 80# pro spec white braid and it feels real smooth
  257. tony38

    good morning guys, i bought a psw909mh

    thanks guys, and regarding the line test and how you fish the rod
  258. tony38

    good morning guys, i bought a psw909mh

    thanks Kevin
  259. tony38

    good morning guys, i bought a psw909mh

    what reel would be a good match, and could the rod be match to fish 30lb bait and some light mega baits and jigs
  260. tony38

    What is the BLS feature on the Spinfisher

    if im correct i believe its the bait less model
  261. tony38

    How do ppl like phenix m1 inshore

    "Seanvdp5" its the psw908 mh 9ter
  262. tony38

    How do ppl like phenix m1 inshore

    can beat the phenix rods warranty over the cousins rods its another pov in my opinion ,, i have the 908mh pair with lexa 400 love the setup light and strong
  263. tony38

    Recommendation yo-yo reel that does not......

    i have the hxj raptor works great , i like the lower gear than most really helps, but then use the rod to lift the fish then wind down
  264. tony38

    deckhand rod with reel seat

    What i have learn is that the deckhand rods dont have a reel seat is for you to be able to move the reel to a confortable position of the reel for you to cast other than have a fix position with the reel seat, i had a calstar 270h 8ter and i added a reel seat to fish with my lexa 400
  265. tony38

    looking for some BD input on rod selection

    I have a phenix psw700xh pair with an avet mxj great setup light and strong 40 lb setup
  266. tony38

    WHEN AND WHERE IS THE NEXT TACKLE SWAPMEET?

    Sun Dec. 6 at 22st landing from 6am to 12 pm
  267. tony38

    22nd st landing swapmeet

    thanks for the info
  268. tony38

    Cast Aluminum vs Machined Aluminum Frames

    i read that machine its from a solid piece of aluminum compair to diecast melted and pour into a mold , but would be nice to hear from someone who really knows and great question by the way Craig
  269. tony38

    Trinidad & phenix

    maybe if you decide to break down the package you will have more chance to sell it
  270. tony38

    Penn Fathom 15 LD2 spool

    i was able to fish my fth15 2spd sat. with a psw908mh line rating 15-40 great little reel very smooth and powerful landed a 15lb yellow on 25lb leader with no problem i used the rod to lift the fish up then wind as i was tought great light setup , sure heavier setups are easier to fight fish no...
  271. tony38

    Penn Fathom 15 LD2 spool

    Hey Brian i just bought one myself and ask how i should spool it, their most common answer was to fill it 50lb braid and a short top shot of your choice, as for the rod i didnt ask but im going to try my psw908 mh rated15-40
  272. tony38

    Hi guys i have a question

    Oh yes, everyone here is always very helpful Never stop learning , i feel that this site its another school were you learn everyday all you need is to ask once again thanks for every respond much appreciated
  273. tony38

    Hi guys i have a question

    Thank for the quick respond john, im thinking of putting as much 50lb braid as i can but at the same time leaving some space for topshot of 30lb mono
  274. tony38

    Hi guys i have a question

    Regarding the fth15 ld 2spd , is it capable of fishing 30lb mono top shot
  275. tony38

    Daiwa Saltiga Expedition 5500H

    whats your location?
  276. tony38

    Stolen: Lefty pro gear 255 and 545 reels :(

    keep on eye on craigslist mostly likely thats where they would end up
  277. tony38

    Calstar bwcdh•270-8hc

    great rod, i added a reel seat to be used with a lexa400 love how it feels
  278. tony38

    mounting a Lexa 400 to deckhand rod

    i had a calstar 270H ,added a fuji reel seat it worked out great
  279. tony38

    FS daiwa lexa 400

    lol must work 24 7
  280. tony38

    FS daiwa lexa 400

    wow how you guys do it to get so much gear up for sale ??
  281. tony38

    Offshore Big Yellows on the Victory

    nice , i have the reg. lexa 400 pwr and just bought a 9ter psw908 mh cant wait to go out and see how it works
  282. tony38

    Offshore Big Yellows on the Victory

    cool , what was the setup you used
  283. tony38

    sold

    any 15 fathom ld 2spd?
  284. tony38

    FOR SALE SHIMANO TIAGRA 20 ,30 2SPD REELS

    yeah the new "A" series do not the old version
  285. tony38

    SOLD

    sorry to say but wouldnt be better to return them , that way you get your full money back instead of loosing some
  286. tony38

    SOLD

    wow you didnt like them ?
  287. tony38

    NaCl or new lexa 400

    by no means im an expert but to have 4 different lexas fail its kind odd, and i dont think there's much difference from the old and the new lexas beside the color and higher gears , the more you abuse a tool the greater the chances to breakdown and it apply to anything its just physics
  288. tony38

    NaCl or new lexa 400

    well if you dont like either of the abu or lexa go with the shimano or okuma problem solve
  289. tony38

    NaCl or new lexa 400

    you could of got your money back under the california lemon law
  290. tony38

    NaCl or new lexa 400

    i have had the lexa 400 for 2 years now not a single problem with it , i wonder if reels break down do to over pushing their limits and poor maintenance
  291. tony38

    Daiwa Saltiga 20

    pm sent about the psw908
  292. tony38

    Help choosing rod/reel setup

    using braid line gives you the advantage of using a smaller reel with plenty of line vs having a big reel fill with staright mono, in my case i bought a lexa 400 fill with 280 yards of 50lb braid then i can go from 20 to 30 lb top shot as i need it , then i have an avet mxj raptor fill with 65lb...
  293. tony38

    FOR SALE GLOOMIS,800M,CLC90H

    interested in the 983c and the calcutta
  294. tony38

    FOR SALE GLOOMIS,800M,CLC90H

    hi where in pico are you located
  295. tony38

    hey guys whats a good rod to match

    to a lexa400 , mainly fishing 25 to 30 lb line bait and light jigs.
  296. tony38

    looking for a psw 808mh

    anyone has one in good conditions
  297. tony38

    Phenix Black Diamond psw 808mh 809H

    pm you over the psw 808mh
  298. tony38

    COMING SOON: New Pro Gear Reel V50

    would be nice if they make like a penn 99 size , believe it would get lots of attention
  299. tony38

    COMING SOON: New Pro Gear Reel V50

    hopefully you would make a narrow version would be very popular i had the little cs550 regret selling it
  300. tony38

    COMING SOON: New Pro Gear Reel V50

    keep us posted, and where we would be able to get them from
  301. tony38

    Tackle Recommendations?

    ..
  302. tony38

    Need someone who can fix my reel! [Fixed!]

    call reelspeed repairs in santa fe springs phone # 562 261-5190 maybe the could help you out
  303. tony38

    Does this party boat look too close? 8-15-2015

    video record next time as the boat its getting closer and closer to your anchor boat and posted, party boats need to respect private boaters as they like to be respect...a posted video will help in case wrost things happen
  304. tony38

    WTB Calstar 90J

    marc pantoja has one for sell contact him for details
  305. tony38

    daiwa lever drag frame failure

    i have had a daiwa lexa 400 for 2 years load it with 50lb braid and change top shots from 20-40 with the proper drag and nomal maintenance and so far no issues, and other seem to have problems with it , with that said i wonder if some missed use and abuse the reels not saying yours is the case
  306. tony38

    50lb outfit

    i have the phenix psw700xh with an avet hxj raptor filled with 400 yards of 80lb braid and change the top shot as i need it between 40-60 lb mono
  307. tony38

    Shimano Flat fall Jigs for Sale - SOLD

    What about the return policy, you could return them
  308. tony38

    daiwa lever drag frame failure

    Wow looks like it was under reaalllly heavy loads first time i hear a metal frame breaks like that even for cast aluminum dont break that easy
  309. tony38

    Is my rig too light for 2 day tuna trip coming up out of San Diego?

    call the landing before getting there, but for what i have been reading you will need a 40lb setup and maybe a 50-60 too , but the landing can update you for whats working better
  310. tony38

    Looking for tackle backpack

    bought the one from turners not bad for $50 now for the zipper problem i spray some wd40 ones in a while and its been good for 3 season now
  311. tony38

    Avet sx or new Shimano torium 16?

    what about the old trusty penn jigmaster and the good old special senators, i recieved a penn 99, fish it from 20 to 40 at times , yes not as the new tech but still works great only thing i did is changes the drag washers and saved tons of money for the fishing trips
  312. tony38

    wish penn would made a phantom

    yeah I meant the fathom and as far as I know penn only makes one on the 40 size either star drag or ld single or 2spd thanks Mr. Robert
  313. tony38

    wish penn would made a phantom

    40 extra narrow ld 2spd or star drag like the trinida 40n or hxj , i think it would be a killer reel
  314. tony38

    Sold

    ..
  315. tony38

    How to fix free spool binding on MXL Raptor

    where's avet quality control at , It seems that more often avet is having issue with their reels wonder whats going on at the plant or persons in charge,,, they should spend more time with this issue than trying to add a 3rd gear to reels my personal opinion
  316. tony38

    How to fix free spool binding on MXL Raptor

    where's avet quality control at , It seems that more often avet is having issue with their reels wonder whats going on at the plant or persons in charge
  317. tony38

    phenix PSW 700m 760m and 700H

    Whats the line rating on the 760?
  318. tony38

    JX vs HXJ

    I gave him an opinion its up to him to take or ignore simple as that regardless of which forum is,,,, lol who gives a shit about how my grammatically english is, as i can see you understood what i said
  319. tony38

    JX vs HXJ

    Hey " egarratt" you realize this is the USA correct ?
  320. tony38

    Exciting news from Avet

    i think avet should work on the back play of the reels instead of adding more gears ,how about adding an ARB and dog like penn's phantom series
  321. tony38

    JX vs HXJ

    i got 400yards of 80lb braid on my hxj raptor , now if you are in the market should take a look at the penn fanthom 40n ld 2spd great reel too
  322. tony38

    Lexa 400 or Abu Garcia NACL or Okuma Komodo?

    I have had the lexa 400 5.1 gear , for about 1 1/2 years no problem lots of yellows and hand full of those football size yft last year
  323. tony38

    Offshore sure didn't stop the Mexicans (BFT)

    mark just like people coming here as tourist gotta pay the feeds to visit , people are taking this well over the heads lets fix the bull shit here first then complain about the rest of the world
  324. tony38

    Offshore sure didn't stop the Mexicans (BFT)

    Guys dont look too far south what about all the closures here in california blaming the sport fishing for the damage that comercial fishery does but as in any part of the world you got money you can buy anyone simple as that its has seen over and over just like that oil spill in Santa Barbara...
  325. tony38

    Problem reversing lugs

    and for sure avet wont do anything about that issue, they said it takes more steps to fix the problem and cost more money, but what i think is just matter of stopping the drill before its creates a longer hole i dont see where that can be adding steps and increasing the cost of the reel
  326. tony38

    Problem reversing lugs

    i wonder if these guys in favor with avet are getting something out of it , wonder what their thought would of be if it was other company like penn,shimano or daiwa!!!!
  327. tony38

    ***PENN- Fathom FTH40NLD/ 2 Speed***

    srmo phone 1800 2236481 part # p009109
  328. tony38

    Avet HX 5/2

    Yes, Steve and drooper loop as well , probably fly line those big sardines next trip
  329. tony38

    Avet HX 5/2

    hi steve i have the hxj which is a narrow version of it i have it load it with 80 lb braid and top shot from 40-60 mono i only used a leader of about 3' on a 7 foot rod extra heavy so you are able to pull of the fish im not the most expert but so far works well the rod is a phenix psw 700xh...
  330. tony38

    Go to rod for local

    its funny how we are caught in the high tech even when it comes to fishing , i learn that we dont need all that expensive gear to catch fish , seen people with penn 500 penn 4/0 catch more and big fish no problem, we really dont need all that drag for anything in the range of 1/2 to 1.5 days...
  331. tony38

    Lexa 400

    no Robert im just saying cus some people push the gear far more of what its intended to be for , its like if i was using the reel to catch a 200lb cow but if you use it right it will work properly
  332. tony38

    Lexa 400

    i have the pwr 5.1 gear and did great last season on yellowtail yft and bottom fish well ,,no problem til now i belive its a great reel under proper use
  333. tony38

    Need mono to flouro knot

    any one used the FG knot and how heavy leader does it work ??
  334. tony38

    Setup for learning to fish the surface iron?

    i think what you have its good like other members said practice and you will get better, i have a calstar wcd 270H now with a lexa 400 past season caught those yft and yellowtail i beleive you dont need to cast a mile to get hooked then again im fairly new also i notice that when you let the jig...
  335. tony38

    WTS; Phenix M1 Inshore 8'2" MH/Xfast

    where in LA are you located?
  336. tony38

    Daiwa Saltiga LD35 and Avet JX 2-speed Reels FS

    is the diawa satiga similiar in size to the avet , not familiar with the diawa satiga thanks
  337. tony38

    Be cautious when buying a Reel

    how long ago it was newly refurbished and did you used it after ???? is it a reg. jx or raptor ver.. asking price
  338. tony38

    Be cautious when buying a Reel

    should tell everyone who he is so we are all aware of that person and put some shame on him
  339. tony38

    Go to rod for local

    calstar 270H its rated 15-40 and for what i been learning it can be fish from 20 to 30 and for reel an penn500 if possible do the narrow 99 version and you are pretty much set ,,for the rod i just add a reel seat
  340. tony38

    Problem reversing lugs

    how can it add steps to stop the machining for going over where it should stop, plus at $500 it better be good i believe even the guys from avet would feel the same if they bought a reel like that
  341. tony38

    Problem reversing lugs

    lol no one is YELLING , ohh yeah just patch your break line with electrical tape that would do the trick , i bet thats the trick avet has so we send the reels because the bearing went out do to corrosion
  342. tony38

    Problem reversing lugs

    ofcouse they wont answer as quickly, BUT JUST ASK WHICH REEL ITS BETTER IF AVET HX OR SHIMANO TALICA OR PENN TORQUE,,, AND YOU WILL GET AN ANSWER FASTER THAN THE PHONE RINGS
  343. tony38

    Problem reversing lugs

    hidding and pointing fingers downstairs funny uhh
  344. tony38

    Problem reversing lugs

    nice advice Dave but where do quality control n inspection comes in part of the company or is it a way for salt gets inside and damage the bearings so we can send it for regular maintanance ??
  345. tony38

    Problem reversing lugs

    so it seems thats a normal issue then hope now that avet sees the treat fix the issue, ROB could you check the studs on your hxj raptor mine seem that the holes in the reel are not deep enough to bottom down the studs i geat about 2 turns of the treat thanks
  346. tony38

    Problem reversing lugs

    i have the same issue same reel and same side aswell less than a month old and seems that the holes for the studs for the reel clamp have issue too
  347. tony38

    i need some advice on a phenix

    thanks mark , yeah im leaning toward the psw700XH , I know its much more different actually pulling on a fish than pulling at the store but i also like how it feels on the hand and the guides looks heavy duty compair to the calstar then again i might be wrong
  348. tony38

    i need some advice on a phenix

    thanks guys for all your advise, went down to Sav O Tackle and was able to pull on those rods phenix calstar ,seeker in the 7foot rated 30-80 all of them the seeker felt stiff and the calstar seems to have the softer tip where the phenix it felt kind of in the middle of all phenix been the psw700XH
  349. tony38

    i need some advice on a phenix

    im just seeing what you guys with more experience use and ofcourse all your advice is very welcome in different brands of rods and how to set up well i was fortune enough to have recieved the hxj raptor as a gift that the reason im looking for a rod to pair it to fish local to 2day trips...
  350. tony38

    Lexa 300 vs 400

    hi i have the 400 with the 5.1 gears power handle filled with 50lb braid and with a calstar westcoast 270H rated 15-40 fish it last season well not an issue with it
  351. tony38

    i need some advice on a phenix

    ok thanks tony and the rest of you guys for you wise advise much appreciated and for taking the moment to advice the newbies llike myself
  352. tony38

    i need some advice on a phenix

    local to 2 day trips fishing the yoyo and dropper loop is 40 lb topshot to light for the application i intend to do
  353. tony38

    i need some advice on a phenix

    psw700XH its rated 30-80 is that too light to fish 40-50 im kind of new and want to get as much knowleged from you guys who knows and thanks in advance
  354. tony38

    i need some advice on a phenix

    black diamond rod , what do you guys think of the psw700xh to match up with a avet hxj raptor thankd
  355. tony38

    Phenix 660H and 660Xh

    sorry Rick still learning system im fairly new , and thanks Guadalupe for the info
  356. tony38

    Phenix 660H and 660Xh

    sorry to cut in, but since you guys are talking about the phenix rods , i have a question maybe you can help me out i want a 7 foot rod for yoyo/dropper loop live bait fishing 40-50 top shot which of these 2 be the best phenix black diamond psw700H or the psw700XH thanks in advance and once...
  357. tony38

    went out on the native sun

    lol yeap those burgers are great
  358. tony38

    went out on the native sun

    no doubt i used to fish it when it was at berth 55 under a different crew no good , but now it great Aaron goes the extra long mile for sure im going back on it again n again would recomended to anyone
  359. tony38

    went out on the native sun

    out of 22nd st landing ,,, great captain and crew did all the could but the fish didnt want to play but had a great time ,,good to see captains like Aaron and crew who puts extra effort great boat
  360. tony38

    wtb and opinions wanted on new live bait tuna and halibut reel

    penn phantom 25n or even the 40n , enough line as well as drag and around your budget
  361. tony38

    good eveing does anyone know

    thanks Rex
  362. tony38

    FS: Pro Gear CS 551

    whats your location plzz
  363. tony38

    good eveing does anyone know

    lol thanks for the reply i thought you just reverse the lugs into plugs but for what you said i guess not thanks again
  364. tony38

    good eveing does anyone know

    if you can use the harness lugs of the hxj raptor as plugs ,thanks
  365. tony38

    AVET HXJ RAPTOR LINES ADVICE

    i just purchase the hxj raptor and it hold 400 yards of 80 berkley braid it also feels so silk and smooth i dont have much to review the braid sav o tackle filled the reel for free good people good deals thanks guys
  366. tony38

    Little Girl Commands Pack of Ravenous Pit Bulls

    i agree Phil is just part of nature even with us if someone mess around with you , im pretty sure you will defend yourself ,but many people try to show just the down side of pits.. love that video im sure no one want to mess with that little angel or else be prepear to be handle by the pack
  367. tony38

    Little Girl Commands Pack of Ravenous Pit Bulls

    whats the % of people kill by drunk drivers? anyone
  368. tony38

    Tips on Yellowtail for a beginner

    i used a small egg sinker to help cast a little,, about .8oz to a 1/4 oz nothing bigger than that for chovies also you could put a carolina keeper to keep the sinker from going down to the hook seems to work for me ,, i used my lexa 400 on a calstar 270 H 8ter so far so good ,, hope it help...
  369. tony38

    hi guys, any first hand reviews on

    so is capable of fishing 50 lb leader for those big yellows in the 3-4 days fishing trips range, no problem?
  370. tony38

    hi guys, any first hand reviews on

    the phantom 40 ld 2 spd, from any one that use it , thanks
  371. tony38

    Okuma Rep.....When on Andros A 12 sizes???

    maybe they are holding them for the fred hall show just a thought
  372. tony38

    Need a rod for my new Lexa 400

    i have mine with a westcoast calstar 270H 8 fter nice light tip and pently of backbone had good times this past season , the only thing i did was add a reel seat as this rod is a deckhand style other than that its about 10 year old rod works fine til now
  373. tony38

    Shimano do the talicas 2 spd have thrust bearing

    just getting some info as im looking foward to but a reel to fish 40-50 lb live bait , yoyo stuff thanks
  374. tony38

    What is a "thrust bearing"?

    thanks John very good info and well explain in a more simple form again thank you for taking the time to explain
  375. tony38

    What is a "thrust bearing"?

    so the thrust bearing is more of a load support , thanks i been trying to decide between the phantom 40 ld 2 spd and the avet hxj and now this helps explain more of the inside
  376. tony38

    i need some advice and opinions

    thanks for that link seems in a way that the internals are more rebust than the avet for what i see , now how they handle to the normal used not abused
  377. tony38

    i need some advice and opinions

    thanks
  378. tony38

    i need some advice and opinions

    thanks for the quick reply, yes im talking about the fathom 40 , i know avets are machine frame vs cast on the penn. how about the guts between the 2
  379. tony38

    i need some advice and opinions

    in these 2 reels pros and cons phanton 40nld 2 spd and avet hxj raptor i know the avet its narrower than the penn planning in putting 300 yards of 80 braid
  380. tony38

    AVET HXJ RAPTOR LINES ADVICE

    most people will fill it up with 80 lbs braid to the top then a short top shot of 3 to 4 feet normally would be 40-60 lb fluro but you can go as heavy as 80lb for those big yellows on the drooper loop
  381. tony38

    Accurate BX2 30. Reduced.Phenix PHD 700XH

    are these the same ones just got sold by a guy in cerritos???
  382. tony38

    Raptor question

    i have a mxj raptor with no play at all
  383. tony38

    Pro Gears for Sale

    whats your location , do you still have the 282 alby special gun metal?
  384. tony38

    Need help stolen gear in Old Town

    sorry to hear your lost, i belive you can contact apple and they can actually track your ipad but need to do it asap..
  385. tony38

    Additional rod/reel recommendation(s)

    how about something light for calico , sand bass, halibut , i have a lexa 400 with the 5.1gear filled with 50 power pro ,pair with a calstar 270H so far its been good enough ,light tip and plenty of back bone to pull
  386. tony38

    okay whats the difference between the..

    true but its always good to spread the word everywhere plus im sure avet its watching, and i give okuma two tumbs up for stepping up in the game and producing some good gear at a lower price yes im aware it wont be like the top notch machine pieces but overall very well produce
  387. tony38

    okay whats the difference between the..

    because many times you bring points to the rep. and just get ignore , now when you open the can of worms in a forum like these and other people start comment about it the rep listen more to the topic just like accurate did with the bx series now the have dogs and ARB's
  388. tony38

    penn yts with all the newell goods

    asking $100, its in very good shape thanks for looking
  389. tony38

    okay whats the difference between the..

    maybe one thing avet can upgrade is the back play they have , maybe adding another dog and an AR bearing that would be great points for them i think
  390. tony38

    New andros 12 A choices

    i'm kind of new but for i been learning you need the higher spd to rip the jig through the water and for bait a slower spd to have the torque you need but again i'm still learning,, or you can buy one of those 2 spd and cover both in one reel
  391. tony38

    hello guys , any word if penn will

    yes a 40 xn in that case, i think it would be a great competitor to other guys who makes extra narrow jigging reels in my opinion
  392. tony38

    hello guys , any word if penn will

    if you have the money go for buddy:p
  393. tony38

    FS: REELS accurates, shimano, daiwa

    got any pics of the 500 bx2 and whats your location thanks
  394. tony38

    hello guys , any word if penn will

    produce a phanton 40 ld 2 pds in the nn like an avet hxj , that could be a great addition to that line up i believe any thoughts on that
  395. tony38

    happy thanksgiving to all, does anyone

    yeah they need to step up, and update a few down things, like most other companies now they have double dogs , or dog and AR bearing, wouldnt mind to pay an extra $30 for that..i know you cant compair machine vs cast but look at those phanton from penn i believe they will be a straight home run
  396. tony38

    happy thanksgiving to all, does anyone

    knows if you can add an antireverse bearing to any size of avet reels to take away the back play ??? i think that could be some good points for avet what do you guys think
  397. tony38

    for sale penn 4/0 with all the newell

    goods including the gears ,reel its in great condition asking $120 thanks for looking , happy fishing
  398. tony38

    Bluefin Tuna limited to 2 fish discussion (merged threads)

    would be interesting to see the limits for comercial fishery as always sportfishing is blame for all the mess that the big companies do, so they have no other way but to blame the little guy... has anybody thought about that
  399. tony38

    penn 4/0 with all the newell goods

    ask $120 its in great conditions
  400. tony38

    Revo toro nacl 60

    do you have any pics
  401. tony38

    ACCURATE BX2 600 SILVER WITH BLUE HANDLE $ 380 HAS 80 SPECTRA

    if you read the whole post the headline says bx2 then on the post it says bx only, thats why Craig is asking
  402. tony38

    penn 4/0 with newell goodies

    thanks Rick ,, yeap the once most of us started with a while back before all the new tech
  403. tony38

    penn 4/0 with newell goodies

    its a narrow yellowtail special with the newell gears 4.1 asking $120
  404. tony38

    Anyone running Toyo AT II tires on their truck?

    i had toyo open country at's 2 ,,they lasted for about 7 years all kinds of local offroad not a single issue but rotation every 4,000 miles,,, size were 285 x75 16
  405. tony38

    hey guys good afternoon, i have for

    downey between 605 and 5
  406. tony38

    hey guys good afternoon, i have for

    sale a nice penn 4/0 red sideplates with all the goodies from newell including the gears 4.1 asking $120 its in good conditions as you can see in the pics thanks for looking...
  407. tony38

    More rods and reels - All gotta Go

    hi where in riverside are you located interested in the 506
  408. tony38

    Seeking advice from Jig experts

    calstar 850 m
  409. tony38

    shimano teramar split grip medium

    good eveing whats the line rating thanks im interested
  410. tony38

    Sold

    hi how many yard of 65 do you have on the 665 nn thanks
  411. tony38

    What Rod for Lexa 400?

    Hi, Linh i have the 400 load it with 50 white izor on a WCD270H 8er calstar rated 15-40 ,,only thing its i added a reel seat good all around 25 -30 bait and light surface jigs hope that helps
  412. tony38

    i have a penn 4/0 with all

    the newell goodies frame, spool, gears 4.1 and fresh 40 big game asking $120 i would rate it a solid 9 in and out pic upon request thank you for looking ,, happy fishing :)
  413. tony38

    Avet HX gun metal SOLD!!!

    got any pics , is it a 2 spd
  414. tony38

    WTB: PENN SENATOR 4/0

    i have one with all the newell goodies plus gears its a yellowtail special let me know
  415. tony38

    where in cerritos are you located

    where in cerritos are you located
  416. tony38

    Offshore Anyone see the UFO @ 5:30am today leaving SI ??? WTF!!!!

    saw it to in Downey looking west toward downtown LA moon was almost full and was able to see downtown as well so i know it was clear saw that light in the cloud i'm like what theirs not a single cloud nor fog and just like that it was gone i thought it was just me
  417. tony38

    Makaira 10 11 SEa Silver BNIB trade only

    of interested in selling it let me know
  418. tony38

    want: avet mxj 6/4 mc

    I have one fill with 50 white izor mc 2spd silver color
  419. tony38

    Wtt: My Accurate B/B665N 2 speed for smaller 870 2 speed or BX2500

    are you the original owner of it ,not interested in selling it and how much would you be asking for
  420. tony38

    FOR SALE ACCURATE BX2 500N NEW IN BOX WITH SPECTRA

    has the reel been register to accurate?
  421. tony38

    1 day offshore gear?

    i bought the mxj which is a bit bigger than the sx it works very nice , i load it with 65lb braid and like other said easy to fo from 15 to even 40 leader plus you have a little more extra line to play with and for a rod i have a wc270dh glass calstar rated 15-40 nice soft tip to fly line bait...
  422. tony38

    Avet actual line capacities.. MXJ & MXL raptors

    i got 370 yds of 65lb izor that light green blue color on the raptor mxj. i too have the same doubt and when i ask i was told the 370yds are enough line for most anything unless your taking a cow trip lol
  423. tony38

    FS Avet MXL 6/4, LX 6/3, HX 5/2

    good afternoon, are you the original owner of the hx 5/2
  424. tony38

    Gear advice for #20 surface iron

    i have a calstar glass 270H with a progear cs550 i have had this setup for about 8 years and love it as everyone else have said used 30
  425. tony38

    Who Makes This?

    should try asking Batman lol,, looks like a lottus
  426. tony38

    FOR SALE NEW IN BOX SHIMANO TALICA 12 2SPD WITH SPECTRA

    how many yard of 80# were you able to put on it
  427. tony38

    Need advice on a rod

    thanks guys for all the info, im going to try my calstar 270H its rated 15-40 I like the action of the rod the only thing is that is a bit big on the but and is a deckhand style
  428. tony38

    Need advice on a rod

    hi tony , one question is the 800L similar to the 270H ?
  429. tony38

    Need advice on a rod

    for a lexa 400 , want something with a light tip and enough backbone to say if i hook a homeguard yellowetail or white seabass primary fishing catalina n san clemente island and the offshore local tuna thanks
  430. tony38

    good eveing those any one

    ok back from turners they took the line off the reel , its like a light green/grey in color 65lb izor braid it was filled with 370 yards , what a difference from 545 , at first they were like i was wrong but when i told them allthe info i grab from here they were like ohhhh lets see ;) thanks guys
  431. tony38

    good eveing those any one

    thank you guys for all the input, like i said im fairly new and learning,, what im thinking is maybe the person who helped me didnt reset the line counter as he filled a reel just before me , so i will contact them asap open at 10 see what happends once again thanks for all you replies and help...
  432. tony38

    good eveing those any one

    thanks for the reply Sam , i check green power pro and the izor , power pro being thinner than izor and yes mxl are wider than mxj , it just dont sound right at 545 yards of 65lb i could see that with 50lb but then again im fairly new in fishing and learning as i go
  433. tony38

    good eveing those any one

    thanks scott, i read some article where it said the spool holds more line in tje raptor models , my issue is that i went to turner and fill the mxj raptor with 65lb izor braid and they said it was 545 yards and on few website i checked it mentions between 400-430 , now my was filled all the...
  434. tony38

    good eveing those any one

    knows how much of 65lb izor braid will a mxj raptor holds all the way to the brim of the spool thanks
  435. tony38

    hi ,need so help with these

    sorry i meant 65lb izor but thanks for the laugh ;)
  436. tony38

    hi ,need so help with these

    ok , so 545 yards of 65lb izor braid sounds right for the mxj raptor then??
  437. tony38

    hi ,need so help with these

    thanks in advance, so i went to turners in norwalk to fill my mxj raptor with 6lb izor braid and they said it was 545 yards and look at some sites and shows more like 400-420 yards any input in this will be so much appreciated thanks
  438. tony38

    good afternoon to all i need some help

    ohh thank you
  439. tony38

    good afternoon to all

    i agree with that its all matter of not pushing the reels to the limits just like anything and everything :)
  440. tony38

    good afternoon to all

    i have heard shimano has a problems with bearings and covering plastic with an outer thin shell of metal
  441. tony38

    good afternoon to all

    i have heard shimano has a problems with bearings and covering plastic with an outer thin shell of metal
  442. tony38

    good afternoon to all

    lol here we go chevy vs ford vs dodge :)
  443. tony38

    good afternoon to all

    thank you to all , im fairly new like i said i bout the reg. mxj 6/4 back on oct and now i had enough save to buy the mxj raptor but i did noticed that the frame on the raptor is thinner than the reg. mxj 6/4 mc
  444. tony38

    good afternoon to all

    bought it last october
  445. tony38

    good afternoon to all i need some help

    need some help i just bought a mxj raptor and i have a regular mxj , now i see the difference on the frame the regular has a thicker frame and the raptor its way thinner is this how they made the raptors or did i get a bad one thanks for any help
  446. tony38

    good afternoon to all

    need some help i just bought a mxj raptor and i have a regular mxj , now i see the difference on the frame the regular has a thicker frame and the raptor its way thinner is this how they made the raptors or did i get a bad one thanks for any help
  447. tony38

    Talica 10ii 2 speed BNIB

    are you the original owner and is it still up for sale
  448. tony38

    FOR SALE DAIWA LEXA 100HS AND 300HS-P

    do you still have the lexa 300 where in pico are you located any number i csn reach you thsnks
  449. tony38

    Daiwa's for sale

    is the lexa sold ?
  450. tony38

    Avet Jx II MC

    do u have a number i can reach you
  451. tony38

    Narrow Penn 505HS with Tiburon P21 Frame & Spool

    would you be willing to ship to LA county ?
  452. tony38

    Narrow Penn 505HS with Tiburon P21 Frame & Spool

    good morning do you still have the reel up for sale any number i can cotact you thanks
  453. tony38

    Penn 506HS w/Accurate frame & 501

    ok could you let me know thanks
  454. tony38

    Penn 506HS w/Accurate frame & 501

    im interested on the 506, can i get back at you around 7pm tonight
  455. tony38

    FOR SALE NIB DAIWA LEXA 100HS AND 300HS-P

    do you still have the 300 , any number i can contact you thanks
  456. tony38

    Lexa 300HS-P/Saltist jigging stick

    does the set up still available if so any number i can contact you
  457. tony38

    avet mxl 2spd mc model

    im not forcing anyone to buy it from me :)
  458. tony38

    avet mxl 2spd mc model

    silver color a solid 10 in n out filled with 65LB power pro braid $300 any question feel free to call or tx @562 6411934 tony thanks
  459. tony38

    Lexa 300HS-P/Saltist jigging stick

    whats the gearing on the lexa , and if no one takes the combo i will do you have a number where i can reach you thanks
  460. tony38

    FS Shimano Trini Torium Avet Sx and Penn/Accurate

    fo you have a number i can reach you and what would be the obo you would take on the 505hs
  461. tony38

    FS Shimano Trini Torium Avet Sx and Penn/Accurate

    hi where in LA are you located, im intereated in the 505HS do you still have it