Search results

  1. FishBoy82

    Razors in Tunatown

    Absolutely PERFECT weather for the end of December.
  2. FishBoy82

    Razors in Tunatown

    Day trip to Grayland for the 4pm low tide. 4 limits in under an hour.
  3. FishBoy82

    2 Kerosene heaters free

    I'll take the other one, or both if no show on Saturday.
  4. FishBoy82

    Olympic Outboard Conversion

    Back to working on the boat after my last surgery yesterday. Broke my ankle and fibula. Got the fish box dividers glassed in, almost ready for the deck.
  5. FishBoy82

    Complete 9mm Ar upper

    You can have them pre-ban.
  6. FishBoy82

    Complete 9mm Ar upper

    Ahhhh got ya!
  7. FishBoy82

    Complete 9mm Ar upper

    Just change your lower to a Glock style. Upper had nothing to do with it.
  8. FishBoy82

    Defiance 220ex repower

    No one complains about too much horsepower, go with the hull's max.
  9. FishBoy82

    Olympic Outboard Conversion

    I'm moving the bilge bulkhead back so I can build a larger fuel tank next winter. Like this,
  10. FishBoy82

    Olympic Inboard to Outboard Rebuild

    Battery shelves in, and dividers for fish boxes made. Hopefully next weekend I'll be putting deck down.
  11. FishBoy82

    Olympic Outboard Conversion

    Battery shelves in, and dividers for fish boxes made. Hopefully next weekend I'll be putting deck down.
  12. FishBoy82

    OB conversion for my 20 Blackman

    What rub rail did you go with?
  13. FishBoy82

    Olympic Outboard Conversion

    So bilge water could get to the fuel tank?
  14. FishBoy82

    Olympic Outboard Conversion

    Also, is Suzuki the only one making fuel injected 9.9 or 15hp kickers?
  15. FishBoy82

    Olympic Outboard Conversion

    How big does the bilge need to be? I'd like to build a new, much larger, fuel tank next winter, but not sure on the minimum size of the bilge. Deck is NOT self bailing.
  16. FishBoy82

    Olympic Inboard to Outboard Rebuild

    Inside stringers in, transom knees in, next is battery trays and finish in floor fish boxes.
  17. FishBoy82

    Olympic Outboard Conversion

    Inside stringers in, transom knees in, next is battery trays and finish in floor fish boxes.
  18. FishBoy82

    Olympic Outboard Conversion

    Ok man, thanks for the advice.
  19. FishBoy82

    Olympic Outboard Conversion

    If you ever put a screw into that PT, you will get rot. The treatment is only the surface.
  20. FishBoy82

    Olympic Outboard Conversion

    I agree, pt is super wet, I don't think fiberglass would bond well.
  21. FishBoy82

    Olympic Inboard to Outboard Rebuild

    Got the boy drilling rivets for a new rub rail install, outside stringers are glassed in, inside stringers are next.
  22. FishBoy82

    Olympic Outboard Conversion

    Got the boy drilling rivets for a new rub rail install, outside stringers are glassed in, inside stringers are next.
  23. FishBoy82

    Olympic Outboard Conversion

    More updated pics, fiberglass should be done by the end of the month.
  24. FishBoy82

    Olympic Inboard to Outboard Rebuild

    Do it you can, it's a great Hull design. My only complaint is while trolling, she likes to lean a bit. But 30 knots in 3' wind waves feels like cruising on glass.
  25. FishBoy82

    Olympic Inboard to Outboard Rebuild

    It's a 1989 22' resorter. Measures out close to 23" tip to tail.
  26. FishBoy82

    Avet MC vs non MC

    Magic cast works great to learn how to cast without digging birds nests everytime. Now that I've learned, I won't buy a MC.
  27. FishBoy82

    Olympic Outboard Conversion

    Ahh, that makes more sense. Do you have a bilge pump inside the bracket?
  28. FishBoy82

    Olympic Outboard Conversion

    Thanks John, I will probably need the 90* drill, the rest I got covered. Ill let you know when Im ready for that.
  29. FishBoy82

    Olympic Outboard Conversion

    Was the bracket bolted through the transom? Do you still have the hole through the transom for the stern drive?
  30. FishBoy82

    Olympic Outboard Conversion

    Got 3 layers down on the transom tonight. Should finish glassing transom tomorrow, then on to the stringers and fish boxes.
  31. FishBoy82

    Olympic Outboard Conversion

    Small update, keyhole is filled, transom is ready to be glassed in.
  32. FishBoy82

    Olympic Outboard Conversion

    Tried calling him for 2 weeks, got ahold of him once and he couldn't tell me when we could meet. I live too far away to just takes random trips out there.
  33. FishBoy82

    Olympic Outboard Conversion

    Still looking for a glass guy...
  34. FishBoy82

    Unsworth is out.

    Wow... I vote for Goat to take his place.
  35. FishBoy82

    Olympic Outboard Conversion

    Anyone know a fiberglass guy that can finish the glass work? Ive changed jobs and have basically no time to finish this with the other things going on.
  36. FishBoy82

    Long Beach Wa

    Fish for surf perch!
  37. FishBoy82

    Novice Tuna Help

    You will not be disappointed with Avet.
  38. FishBoy82

    Need electronics for new boat

    I'd look into the Raymarine Dragonfly.
  39. FishBoy82

    Olympic Outboard Conversion

    Not a huge update, but now that shrimp and ling season is over, got the wood cut for the transom. Headed to Burlington this Friday to pick up the glass supplies. @goatram is gonna have to come up with a mount for this.
  40. FishBoy82

    Shrimp ID

    Dinner shrimp.
  41. FishBoy82

    recommendations for a refurbed 5.7

    Go with a new long block from Michigan motorz.
  42. FishBoy82

    recommendations for a refurbed 5.7

    All I have to say is stay the fuck away from US Marine Engines.
  43. FishBoy82

    Treager Grill or Green Mountain

    Love my Green Mountain, had a sensor go out and was shipped a new one free almost two years after buying it. It's been great and we BBQ 3 to 4 times a week. That said, my next pellet grill will be a Yoder.
  44. FishBoy82

    Removed the Android BD App

    I totally understand there has to be some ads for a free forum. But this has to load every page...
  45. FishBoy82

    Removed the Android BD App

    Lagging comes from trying to load TONS of ads and crap at the bottom of each page. After loading a page, the entire page jumps right after, making clicking links impossible until it's fully loaded. Just bring the app back. Over 1,000 downloads and 21 positive reviews in just a few short months...
  46. FishBoy82

    Removed the Android BD App

    Damn, this sucks! Mobile website is super laggy and glitchy. I'd gladly pay for the mobile app.
  47. FishBoy82

    Pair of 2011 300 HP Verado and all rigging

    Yep, nothing different with running a single counter rotating outboard, other than prop.
  48. FishBoy82

    Olympic 26' XLC rebuild **F/V Sea Monkey** -pic heavy

    Beautiful boat!! I love those Olympic's!
  49. FishBoy82

    Pipe Jigs in shallow water

    I've only had luck with pipe jigs in deep water and only the off the coast. I feel like it's a visabillity thing.
  50. FishBoy82

    Bait tank

    West Marine had the best price on the Kodiak 22 gallon I got.
  51. FishBoy82

    11/16 Yale Coradage Nylon Line - 8 Plait For Sale

    I'll take 300'. I work off old Hartford Rd. Let me know when we can meet up.
  52. FishBoy82

    Olympic Outboard Conversion

    I spent 5.5 hours grinding up the transom area. That 6" Metabo rips!! Going to start glassing in the new transom next weekend.
  53. FishBoy82

    Olympic Outboard Conversion

    Whoa man, that's really impressive! Nice work and thanks for the pictures!
  54. FishBoy82

    Polyform A-2 Buoy Bags

    All good brother. Just let me know if it doesn't work out.
  55. FishBoy82

    Polyform A-2 Buoy Bags

    If t_dub doesn't, I'll take all 4
  56. FishBoy82

    Neah Bay late June

    I second ling cod todd.
  57. FishBoy82

    Archery elk hunt

    Perfect! Thanks so much for the head start!
  58. FishBoy82

    Archery elk hunt

    I read that area is mostly private land. I hunt archery. I was kinda thinking ellensburg/kittitas area? Not sure what unit would be best.
  59. FishBoy82

    Archery elk hunt

    I got into hunting last year for the first time in my life and shot a 2x3 blacktail close to home. My son has been seriously itching to go on an elk hunt with me. Where is a decent spot to starting looking? I'm not asking for your honey hole, just a semi-close area that we may have a fighting...
  60. FishBoy82

    Olympic Inboard to Outboard Rebuild

    Not a huge update, but got the wood out of the transom, just need the chip the last micro layer off and prep the glass for the new wood.
  61. FishBoy82

    Olympic Outboard Conversion

    Not a huge update, but got the wood out of the transom, just need to chip the last micro layer off and prep the glass for the new wood.
  62. FishBoy82

    Lets see your Bait Tank

    Here's mine.. [emoji90]
  63. FishBoy82

    Olympic Outboard Conversion

    That would be much appreciated!!
  64. FishBoy82

    Olympic Outboard Conversion

    Thanks to Vance, I'm back in action.
  65. FishBoy82

    Olympic Outboard Conversion

    Wow! That sounds awesome!
  66. FishBoy82

    Olympic Outboard Conversion

    My Makita grinder gave up the ghost. Who has the hook up with metabo? Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  67. FishBoy82

    Olympic Inboard to Outboard Rebuild

    That's where the old kicker cables went through. The builder added that, Im thinking about cutting it off so there is nothing in the way of the swim deck. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  68. FishBoy82

    Olympic Outboard Conversion

    Do you have any photos of your process? The tank in the floor wasn't too terrible, I cleaned it up good and coating it with epoxy. The side tank was really bad on top. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  69. FishBoy82

    Olympic Outboard Conversion

    I plan on removing all the wood so no chance of rot carrying over. Goatram built this to brace for the added weight and stress, It takes up too much room so I'm going to add knees to the new stringers that go up the transom. This boat came either inboard or outboard with a bracket and Olympic...
  70. FishBoy82

    Olympic Inboard to Outboard Rebuild

    Went through 2 inboard engines over 4 years and decided to convert to an outboard. Boat is solid and handles the PNW water easily Blown up inboard $2,600. Stay far away from US Marine Engines. Their warranty and engines are CRAP Had @goatram build a custom bracket to hold main...
  71. FishBoy82

    Olympic Outboard Conversion

    Floor is out, foam out, and skin pulled off transom. So glad I'm doing this and not next year with the outboard hanging off this transom. Next is to get that rotted wood off the outside skin then grind and grind and grind some more. I've been told Olympics are solid boats, the outside...
  72. FishBoy82

    Ideas needed: Boat transport CA to WA

    I'm headed down for vacation end of the month, I could bring it back with me, possibly. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  73. FishBoy82

    Olympic Outboard Conversion

    Half the floor out and dug out the old foam. Inboard engine mounts removed, lots of water intrusion. Tomorrow finish tearing out the floor and transom. What do you think about fiberglassing in aluminum fish boxes? Only worry is the aluminum corroding and no way to get them out to replace...
  74. FishBoy82

    Olympic Outboard Conversion

    Yea me too! This will be a new experience!
  75. FishBoy82

    Olympic Outboard Conversion

    Started cutting floor out to build fish boxes and replace transom. Hoping to have demo finished this weekend, new transom in next weekend.
  76. FishBoy82

    Olympic Outboard Conversion

    Thanks guys, I've been looking at the Mas Epoxy system. Looking for local marine plywood or coosa board and fiberglass mat. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  77. FishBoy82

    Best tool/method to cut fiberglass for electrical panels etc.

    Oscillating tool with carbide blade. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  78. FishBoy82

    Olympic 26' makeover begins

    Gonna be sweet, I love Olympics. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  79. FishBoy82

    Olympic Outboard Conversion

    Is there a place more north? That's a 3 hour round trip with no traffic for me. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  80. FishBoy82

    Olympic Outboard Conversion

    Is there a local place to pickup fiberglass supplies? Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  81. FishBoy82

    Clam digging friendly hotel/motel long beach?

    The Breakers was perfect for us. They have a cleaning room with running water and sinks. They also allowed us to bring our dog. Quick walk to the beach. Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  82. FishBoy82

    Yamaha four stroke outboard

    Any Yamaha 15hp ? Sent from my XT1254 using BDOutdoors mobile app powered by Tapatalk
  83. FishBoy82

    Electrical Connectors

    I ordered something similar off Amazon for lights on my truck.
  84. FishBoy82

    There are No-Contact orders with the waters of Puget Sound

    What a shitty situation. :shake:
  85. FishBoy82

    6.7 powerstroke or 6.7 cummins

    Ford, all around built strong. Dodge has never made a good transmission and the interior falls apart.
  86. FishBoy82

    Stainless Question

    316 or 18-8, harbor Marine has a great selection and price.
  87. FishBoy82

    2003 Ford F-250 FX4, King Ranch Great tow rig!

    Sweet truck and a killer price! I wish I had found this instead of buying my beat up 7.3 and dumping lots $$$ into it to make it reliable. 6.0's haul the mail!
  88. FishBoy82

    Cannon magnum 10 stx (NIB)

    I sent you a message, I work in lake Stevens Monday thru Thursday 5am to 330pm, when is a good time to pick it up?
  89. FishBoy82

    Cannon magnum 10 stx (NIB)

    Does it come with the swivel mount? If so, I'll take it.
  90. FishBoy82

    Yamaha four stroke outboard

    What year? Can you send me any pictures? Thanks
  91. FishBoy82

    Converting pull start to electric

    Found a deal on a manual pull start kicker, but being so far back on the bracket, I need an electric start. It's a mid 2000 Yamaha 15hp. Is it possible to add a starter and remote start switch?
  92. FishBoy82

    The Journey

    Cant wait to see whats in store. Let me know if you need a hand with anything!
  93. FishBoy82

    Olympic Outboard Conversion

    Motor showed up at the shop today. As soon as the shop is drywalled, boat is going in to fiberglass the transom hole and paint/powdercoat. Sent from my XT1254 using Tapatalk
  94. FishBoy82

    Got my first deer

    Thanks bill! I couldn't believe the amount of fat on this one. Tuss says that's a sign of a cold rough winter. Sent from my XT1254 using Tapatalk
  95. FishBoy82

    Olympic Outboard Conversion

    2007, older than I originally wanted but came from single owner and well maintained and only 360 hours. 30" and got new binnacle and key ignition switch and wire harness with throttle and shift cables. Only need steering and prop.
  96. FishBoy82

    Simrad NSS8

    Forgot with mention it comes with an airmar p66 transducer.
  97. FishBoy82

    Seastar or Uflex

    What are you guys running for steering? Pros and cons of each?
  98. FishBoy82

    fishfinder

    How many watts are you running?
  99. FishBoy82

    Green Mountain vs Traeger

    8 hours on the Green Mountain at 225°
  100. FishBoy82

    Simrad NSS8

    I will post pictures of the back tonight. No radar dome included.
  101. FishBoy82

    Simrad NSS8

    Perfect condition. Was installed in my boat for 10 hours until the new engine broke. I don't have the original box any longer but have EVERYTHING that came in the box. $600 shipped
  102. FishBoy82

    Cannon downriggers

    Electric mag5's with new cable and power plugs. Comes with the swivel bases. Make an offer or trade?
  103. FishBoy82

    Cannon downriggers

    Electric mag5's with new cable and power plugs. Comes with the swivel bases. Make an offer or trade?
  104. FishBoy82

    3 Days Halibut!!!!!!

    That's some bullshit.
  105. FishBoy82

    Green Mountain vs Traeger

    I've had great luck with the GM. We bbq 3 or 4 times a week with zero issues in almost 2 years. Gets hotter than the trager and can't beat the price.
  106. FishBoy82

    Yamaha f-300

    Any pics? Cable or fly by wire?
  107. FishBoy82

    SeaSport Makeover

    Who's doing the fiberglass work to seal off the transom?
  108. FishBoy82

    Cost vs. Reliability

    No storage, just plumbing for bait tank and flotation. Sending you a PM.
  109. FishBoy82

    Cost vs. Reliability

    Custom made bracket with tons of floatation.
  110. FishBoy82

    Deck repair

    I used this on everything from the rub rail up and added non skid media to the paint I used on the floor. 2 years and still looks gret. Best thing is you can paint right over so if it gets scratched( dragging shrimp pots over the rail), touch ups are easy...
  111. FishBoy82

    Cost vs. Reliability

    The $19k for the motor doesn't include prop, steering, contols, etc. 25k when it's all said and done. Leaves two grand for electronics which doesn't go very far.
  112. FishBoy82

    Cost vs. Reliability

    Sending him a PM now. Thanks guys!
  113. FishBoy82

    Cost vs. Reliability

    $120 difference between a 250 and 300hp Suzuki, might as well go bigger. I thought the corrosion issue was in the 225hp Yamahas and from 2002-2004? http://www.bdoutdoors.com/forums/threads/yamaha-f225-4stroke-exhaust-corrosion.459471/
  114. FishBoy82

    Cost vs. Reliability

    Getting close to putting the outboard on my 23' Olympic and have been kicking around the idea of a lightly used outboard. I was quoted $19,238 for a 300hp zuke with factory warranty. Or go this route and save around 10 grand and have more money for electronics, kicker, etc...
  115. FishBoy82

    Somebody hit Miss Eliza

    What.the.fuck! Fish karma is a thing, and I hate to be the guy who did this...
  116. FishBoy82

    Got my first deer

    I have BIG shoes to fill next year!
  117. FishBoy82

    Got my first deer

    And on opening day.. 2x3 Trail cam got it on video
  118. FishBoy82

    Start Of Season Reminder.... Boat Ramp Etiquette

    I need to start carrying a shovel.
  119. FishBoy82

    Volvo penta aq280

    Hey Joe, still avaliable, I'm up in Seattle.
  120. FishBoy82

    Cannon Mag 5 downriggers

    Great condition, new line. New style plugs. $550 for the pair.
  121. FishBoy82

    Olympic Outboard Conversion

    Bracket is about done. Now for some fiberglass work...
  122. FishBoy82

    Olympic Outboard Conversion

    Not yet. Will be filling the hole, adding knees to the transom, boxing in a fish box and painting the outside from the rub rail down, next.
  123. FishBoy82

    Olympic Outboard Conversion

    Yes, it's there to transfer some of the force to the old engine mounts.
  124. FishBoy82

    Olympic Outboard Conversion

    Weekend update,
  125. FishBoy82

    Olympic Outboard Conversion

    Sweet! I'll take it, pm sent.
  126. FishBoy82

    Volvo penta aq280

    Great condition volvo penta aq 280 with gearing for a v8. Shifts smooth forward and reverse. $750 offers and trades accepted.
  127. FishBoy82

    Olympic Outboard Conversion

    Anyone know where I can get a universal sliding door?
  128. FishBoy82

    Olympic Outboard Conversion

    Force is coming out with new 132.5's. Revolutionary.
  129. FishBoy82

    Olympic Outboard Conversion

    Volvo penta 285
  130. FishBoy82

    Olympic Outboard Conversion

    I got lucky, Olympic built this boat with an option of inboard or outboard. The transom is over 2.5" thick. Add that to the reinforced structure that will be tied to the existing engine mounts and this will be the strongest part of the entire boat.
  131. FishBoy82

    Olympic Outboard Conversion

    I can't wait! I used grizzly's aliphatic epoxy. http://grizzlygrip.com/?IsViewMobile=false I wanted a coating that could handle my kids and shrimp pots being drug over the rail but didn't want a "work" boat look. I was thinking more of a 250hp, headed to the boat show Thursday to find out who...
  132. FishBoy82

    Olympic Outboard Conversion

    The bracket should create enough positive flotation to null the added and extended weight of the outboard.
  133. FishBoy82

    Olympic Outboard Conversion

    Dropped off at Goatrams place for the surgery
  134. FishBoy82

    Olympic Outboard Conversion

    Gutted, cleaned, painted
  135. FishBoy82

    Olympic Outboard Conversion

    Here are some more photos The day I bought her First trip and fish I hate inboards...
  136. FishBoy82

    Olympic Outboard Conversion

    I asked a while ago about someone local to build an outboard bracket, you guys recommended the Goat. I got a time slot worked out and just after one day, I have this
  137. FishBoy82

    FYI the stories are true- dont buy off brand spectra

    Possibly, although the power pro doesnt do that at all. You can have my cheap stuff to try for yourself.
  138. FishBoy82

    FYI the stories are true- dont buy off brand spectra

    I bought some knock off stuff on Amazon. Supposed to be 100lb test. Never broke it rock fishing but when reeling in, the line would cut into the spool of line and be impossible to let line back out. I cut most of off my avet to continue fishing. Now only real power pro.
  139. FishBoy82

    Repower for Reelaxation

    I'm "dealing" with their BS warranty now. Said I crossed two spark plug wires and that caused a blown Head gasket and detonated a piston.. This is after 10 hours. Different cylinder AL the valves are tuliped and leak. Engine needs a complete rebuild after 10 hours. Never got over...
  140. FishBoy82

    Pesky deer

    Seriously, they are completely random. I was surprised to see this guy today, been a week since last sighting.
  141. FishBoy82

    Pesky deer

    Love my browning. Tried a few cheap ones, seems you get what you pay for.
  142. FishBoy82

    pair of 225 optimax's

    Year? Hours? pics?
  143. FishBoy82

    Outboard bracket

    Any local guys build them? Looking into installing a f225 on a 23' Olympic.
  144. FishBoy82

    Rebuilding an inboard

    Hmm, only reviews I found were ill fitting issues. No problems with mine for the last 3 years. I run fresh water through them after every trip. Must be hit and miss. Anyone have a decent place for a rebuilt long block? So far, looking at West coast engines and Rapido engines.
  145. FishBoy82

    Leaded line

    I have 200' lengths of 5/16" leaded line, $25 a shot. One comes with a crab pot. Have a full spool of 400' brand new for $50. Can meet from Camano to Smokey Point
  146. FishBoy82

    Rebuilding an inboard

    THANK YOU!
  147. FishBoy82

    Rebuilding an inboard

    That's an optical illusion on the water pump. The camera is only capable of capturing so many frames per second making it look like it's not spinning. Oil pressure started great at 50psi, it's now non existent.
  148. FishBoy82

    Rebuilding an inboard

    Bought it from this place when they were in business http://goo.gl/maps/4qBhI
  149. FishBoy82

    Rebuilding an inboard

    Haha! Too bad it doesn't have the torque curve of a diesel!
  150. FishBoy82

    Rebuilding an inboard

    That would be awesome if that were the case, here is a video..
  151. FishBoy82

    Rebuilding an inboard

    Definitely a marine application. Not sure on who I'd trust to order a long block through, everyone has good and bad reviews. I figured finding a mom and pop type shop would end with better results and putting $$ in the local community.
  152. FishBoy82

    Rebuilding an inboard

    Its an 86-94 Chevy 350 with the center bolt valve covers and 1-piece rear main.
  153. FishBoy82

    Rebuilding an inboard

    Looking for recommendations for an engine builder north of Seattle. Bought a "rebuilt" engine on the peninsula with a knock. Thanks in advance!
  154. FishBoy82

    Whats the best VHF antenna

    How many of you are running more than one vhf?
  155. FishBoy82

    We need rules like this..

    https://cdfgnews.wordpress.com/2015/03/11/new-recreational-groundfish-regulations-now-in-effect/
  156. FishBoy82

    DR and Seabass Rod for 8 year old?

    My 6 year old uses a garage sale tuna rod and an avet for seabass and lings.
  157. FishBoy82

    Anyone using simrad?

    I have a nss8 with airmar p66 transducer and love it. Cant wait to add another unit and 4g radar.
  158. FishBoy82

    Vhf radio, antenna, and mount

    Not sure on age, bought it used here on BD. I hooked it up to power and everything worked.
  159. FishBoy82

    Vhf radio, antenna, and mount

    Northstar 721 vhf radio with barometric sensor, brand new Shakespeare antenna and rail clamp stainless mount. All for $175
  160. FishBoy82

    Shrimping

    We shrimped south end of Lopez, had over 4 limits by 3rd pot, rail dumped 4th pot. Headed to deception to bottom fish with not a single bite, ran to blakley where the 6 year old hooked 2 lings, 1 keeper, lots of big rock fish. Headed back to cornet bay and fished around there with nothing. No...
  161. FishBoy82

    Baitcaster question

    Its a seeker 270-7, custom wrapped, deckhand style.
  162. FishBoy82

    Baitcaster question

    Yes a small levelwind would be sweet! What's the smallest with a clamp?
  163. FishBoy82

    Baitcaster question

    I have a deckhand style rod that's super light that I would like to use for catching bait off a pier or boat. I'm looking for a small baitcaster reel with a clamp, any suggestions?
  164. FishBoy82

    Sea Bass *show-in-tell*

    Swim baits are always fun. http://www.swimbait.com/home.htm
  165. FishBoy82

    Braid or not to braid

    Care to elaborate?
  166. FishBoy82

    Shrimp Double Buoy Poles

    I'm picking them up Friday.
  167. FishBoy82

    Reels For Sale

    2nd dibs on 113, I can pick up today.
  168. FishBoy82

    Pot Pullers

    And the Ace is made in Canada, either way, not supporting America.
  169. FishBoy82

    Need Info on Cheapest Place for Exhaust Manifolds Locally

    I ordered mine on eBay http://pages.ebay.com/motors/link/?nav=item.view&id=160795699399
  170. FishBoy82

    Line-x

    I'd imagine it would clean up just as easy as gel-coat?
  171. FishBoy82

    Line-x

    Looking to have the gunwale sprayed in white on my glass boat. Anyone have a line-x dealer recommendation? I'm up by Everett.
  172. FishBoy82

    manifolds risers and hoses ?

    I use channel locks on hoses, find the right pressure where the hose spins on the barb and not the pliers on the hose. Once it's broke free, pull on hose.
  173. FishBoy82

    Humminbird 595c

    Humminbird 595c, color, GPS, chart plotter, sonar. Works great. $350 or trade.
  174. FishBoy82

    Northstar Explorer 721 VHF Radio

    Sold, great seller! Thanks!
  175. FishBoy82

    WTB: Mooching Reel and Fixed VHF Radio

    I have a Uniden marine vfh, good condition, everything works, with dsc.
  176. FishBoy82

    Rear awning of a hard top

    Here is the only Olympic hardtop with an awning I've seen, http://seattle.en.craigslist.org/see/bod/4314704533.html
  177. FishBoy82

    Northstar Explorer 721 VHF Radio

    Where are you located?
  178. FishBoy82

    Spun prop offshore

    Turn your lifejacket upside down and put your legs through.
  179. FishBoy82

    Moving a boat

    Its tied to a dock.
  180. FishBoy82

    Moving a boat

    I wish I could! Would make this much easier.
  181. FishBoy82

    Moving a boat

    I'm looking at a 27' bayliner for parts for my Olympic. Problem is, my trailer won't fit the bayliner. Anyone know of a service that could move a boat from Ebey island slough to Camano Island? Or a trailer rental place?
  182. FishBoy82

    WTF...weekend weather!

    This about sums it up. I need to hurry and retire...
  183. FishBoy82

    Hood Canal Crab

    Nice! How long were you soaking the pots? We crabbed Port Susan yesterday for 7 hours and barely scratched 5 keepers.
  184. FishBoy82

    AREA 10 CRAB WAS AMAZING THIS WEEKEND!

    We crabbed in Elger Bay on the 4th, lost 2 pots first thing, but then landed on some huge crab. 13 crab in about 3 hours with 4 pots 120-140' depth.
  185. FishBoy82

    NEW BD members post a hello here

    Hey fellow fish lovers, my name is Josh. New to the Puget Sound area but not to fishing. Picked up a 23' Olympic hardtop and ready to slay some monsters! If any of you see me on the water, be sure to say hello! The day I bought the boat. Maiden voyage with new owner Home Me with the first...