Search results

  1. Revival

    20' Skipjack Flybridge Outboard

    Boat is still available. Had a few people look at the boat but no offers. Just did an oil change and took the boat out this past weekend. Boat ran great. its turn key.
  2. Revival

    20' Skipjack Flybridge Outboard

    Still available, ready for summer. Just add a bait tank...
  3. Revival

    20' Skipjack Flybridge Outboard

    Forgot the most important part
  4. Revival

    20' Skipjack Flybridge Outboard

    I will this weekend been very busy with work.
  5. Revival

    20' Skipjack Flybridge Outboard

    1969 20' Skipjack Fly bridge Completely restored. All new gelcoat, 2015 150hp Yamaha Outboard, All new wiring, Electronics, Batteries, New rub rail, New hull joint bolts, New custom cushions, Teak Bulk Head. Standard Horizon VHF, Bennett Hydraulic Trim Tabs, Lumitec Seablazex under water light...
  6. Revival

    BD show me your SkipJack boat thread

    Considering putting my 20' Skipjack up on the market at the end of the season. Just throwing the idea out there. Great boat just want something bigger.
  7. Revival

    lifes a beach

    Ouch
  8. Revival

    20' Skipjack Flybridge rebuild...

    I just laid the teak floor over the top of the factory floor. Thank you!
  9. Revival

    BD show me your SkipJack boat thread

    Looking for a double axel Trailer for a 20' Skipjack. Needs to be Galvanized or aluminum. My trailer is on its last leg. Any leads on a deal would be appreciated!
  10. Revival

    WTB 20' Skipjack Open

    Great hull, modified V, but you'll only be able to fit a 50gal in the boat. Any 20 opens after 1972 have the deeper v and will fit a larger fuel tank... (i'm happy with my 1969 but have to carry 2-5 gallon jugs for longer trips)
  11. Revival

    Skipjack 20' REFIT FUN

    Here is a really useful 20' Skipjack photo bucket thread dirtydiego41 I believe http://s1360.photobucket.com/user/dirtydiego41/library/skippy?sort=3&page=1
  12. Revival

    Skipjack 20' REFIT FUN

    @kastmaster has done a 20' Skipjack open, He just repowered with a F175 and fv_reelafair2.0 (on instagram) just did a conversion to a open with a 300hp Verado! I'm on here https://www.bdoutdoors.com/forums/threads/20-skipjack-flybridge-rebuild.565587/ And instagram Skipjack_20 Feel free...
  13. Revival

    24FT Flybridge Skipjack project

    Nice, I used gelcoat
  14. Revival

    24FT Flybridge Skipjack project

    If you can avoid removing the flybridge you will save your self a lot of head ache unless you intend on painting the boat. Accessing the bolts you might have to cut the interior liner. Keep up the hard work !
  15. Revival

    24FT Flybridge Skipjack project

    Nice job! great boat!
  16. Revival

    R.H.I.B.S and INFLATABLE BOATS; Post 'em up!

    I've seen this boat over at CI. Very cool setup. Spent 3 days in the same cove. Cool guys.
  17. Revival

    24FT SKIPJACK FLYBRIDGE PRICE REDUCED 2500

    Would you part out a few items? I need a bimini top for my skippy.
  18. Revival

    1966 Whaler

    Buy sandpaper and gelcoat in bulk. Lots of resources on check out my boat.
  19. Revival

    Any experience with non-skid?

    Silca sand mixed with gelcoat works well.
  20. Revival

    Offshore Hail Mary For The BFT

    Yeah frank and corey!
  21. Revival

    Boat capsized, lajolla

    Sad and scary. always watch the weather and swell. Looks like it was a Aqua sport 215 explorer. Prayers for the family and friends.
  22. Revival

    Twin Outboard Motor Bracket With Swim Deck

    Try Stainless Marine in FL. They have been building brackets forever and it comes powder coated, has all the mounting hardware, templates and rigging tube. Also you wont have to wait for tom to call you back... They will give you a discount last i checked if the bracket is in stock.
  23. Revival

    I/O to Outboard Conversions Photos

    Thank you! Nice looking faralon. Boat goals right there! So many good boats getting posted up on here. You could almost put a bracket on anything.
  24. Revival

    I/O to Outboard Conversions Photos

    In my build there are some. Yes, the transom is 3" thick with an additional 3/4" marine ply glassed on the inside of the transom.
  25. Revival

    I/O to Outboard Conversions Photos

    A place to post photos from Inboard to outboard conversions. Add any tips or advice for people looking to convert their boat. I'll Start.... I finished my 20' Skipjack Fly-bridge a little under a year ago and I'm very happy with the results. Fuel economy, deck space, and reliability were...
  26. Revival

    Skipjacks

    I have a 20 skipjack flybridge with a 150hp and i love it. It cruises at 22 and tops out at 30kts. I get about 3mpg+
  27. Revival

    BD show me your SkipJack boat thread

    This has to be the cleanest 24 i've seen in a while. That tower is sick!
  28. Revival

    New Skipjack 20 open owner: does my truck tow?

    I towed it from north LA and around orange county with no problems. I usually only tow around town but have done a few trips on the freeway and it handles fine.
  29. Revival

    New Skipjack 20 open owner: does my truck tow?

    No problem! I have the same truck and boat. Never had a problem, make sure to have A/T tires.
  30. Revival

    20' Skipjack Flybridge rebuild...

    I've been using the boat a bunch lately and finally built the door, got the down below dialed with some cushions and head / table box. I also built a sun pad for the stern that sits on action packers which are very convenient for storage. Here's some recent photos.
  31. Revival

    2015 Yamaha F150 HP Outboard New

    My dad boat this with the intent of repowering his whaler. See his ad on CL New in box http://orangecounty.craigslist.org/bpo/5472247315.html
  32. Revival

    New Pooper

    Porta potti 2.5 gal is what I put on my 20' skippy.
  33. Revival

    Off the market! 1970 20' skipjack fb project $300 with trailer and pink slip

    I finished my 20' Flybridge last year. A ton of work but definitely happy with the results. You can see the build on check out my boat or on instagram skipjack_20 Feel free to hit me up with any questions!
  34. Revival

    20' Skipjack Flybridge rebuild...

    Heres the 2 Part I was talking about http://www.jamestowndistributors.com/userportal/show_product.do?pid=4245
  35. Revival

    20' Skipjack Flybridge rebuild...

    I'll post more soon!
  36. Revival

    20' Skipjack Flybridge rebuild...

    I've seen teak LP'd with clear and it looks amazing. Like glass.
  37. Revival

    20' Skipjack Flybridge rebuild...

    Thank you! My boat never had interior so I got to start from scratch, I made the base to cover the old plumbed in head area and for the porta potti to sit on. I kinda like the original 24 head design but my concept was easy, plus having not hinges keeps it simple. I used Pettit Captain varnish...
  38. Revival

    20' Skipjack Flybridge rebuild...

    Had some fun this past weekend building a head/ table box and a louvered door. Loving the boat so far with the new yammi!
  39. Revival

    1980 24 Skipjack Opened

    So clean! Gotta be enjoying all the deck space.
  40. Revival

    17' SurfSki

    off topic but what time of year did you go to LH?
  41. Revival

    STOLEN 2320 pilot house...

    Only one way in and out of the water in Newport is the dunes. Hopefully they have some have some camera shots of them. Glad its recovered but no trailer, makes it a major bummer.
  42. Revival

    20' Skipjack Flybridge rebuild...

    Thank you! I haven't weighed the boat or the trailer but I would estimate 4,500lbs for the whole rig. My Pre-Runner Tacoma 2gen handles towing the boat just fine. I installed an add a leaf and it helped stiffen up the rear end. I'd like to get a bunk style trailer with brakes for longer runs.
  43. Revival

    BD show me your SkipJack boat thread

    Bench seat for me, I have removable cushions. Very comfortable and fits 3 just fine. Doubles as a bed while on anchor.
  44. Revival

    20' Skipjack Flybridge rebuild...

    Thank you feels good that shes ready to go! I'm still working on some small details but the boat runs great so far! I'm heading out to go spearing and hooping this weekend. I borrowed the RV frame from a friend and used a harbor freight tarp. I think you can get them on craigslist for cheap.
  45. Revival

    Not a rebuild but wanted to show her off!!

    Nice skiff! Ready to go!
  46. Revival

    Trophy 2052 PilotHouse Build

    I met you at rev-chem in costa mesa. Great Job! Looks like you figured out the build. Congrats!
  47. Revival

    20' Skipjack Flybridge rebuild...

    For now I just step over the side but eventually I will mount a ladder or put some yeti coolers in.
  48. Revival

    20' Skipjack Flybridge rebuild...

    Anchored up
  49. Revival

    20' Skipjack Flybridge rebuild...

    Anchored up
  50. Revival

    20' Skipjack Flybridge rebuild...

    In Catalina with my wife and just had a chance to post a picture of the boat. Launched on Friday for a break in and pulled her back out Saturday morning for a few tweaks. She runs great! Fast! I need tabs but very happy with the performance ... The sweet spot was 20kt ish @3300. My wife was so...
  51. Revival

    20' Skipjack Flybridge rebuild...

    Thank you Sharkmeat, Trixkelly ,Qbanned! I'm stoked to have gotten this far with the help of my wife and a few friends along the way. Once the boat is dialed in I'll be adding some canvas and a bait tank for some over night trips.
  52. Revival

    20' Skipjack Flybridge rebuild...

    Getting close to launch time. Just working on fuel fill / fuel lines and few other Misc items. I plan on doing some break in hours this weekend.
  53. Revival

    BD show me your SkipJack boat thread

    This guy did a nice job building a cabinet for a BW. Although not a skipjack it still might give you some good ideas. http://www.bdoutdoors.com/forums/threads/my-ride-boston-whaler-25.463867/
  54. Revival

    20' Skipjack Flybridge rebuild...

    Getting the prop next week, I'm going to do that same pitch prop but a stainless Solas 4 blade. Anywater drains into the bilge and out through bilge pumps. I like how you did scuppers.
  55. Revival

    20' Skipjack Flybridge rebuild...

    Great job! 40kt?!! Wow! I'm hoping for mine to do 30. Total inspiration to see another skippy conversion completed and posting great numbers.
  56. Revival

    Skipjack question!

    My 20 has a full height anchor locker instead of the overhead cubby type. You might be able to build a larger fwd bulkhead. I'm pretty sure there is 18" of drop down
  57. Revival

    20' Skipjack Flybridge rebuild...

    Here's some photos of the new outboard mounted. Still working on rigging and electrical. Still a couple more weeks from launch date. Super stoked on how the boat is turning out!
  58. Revival

    BD show me your SkipJack boat thread

    The boat looks great! Did you use paint or gelcoat?
  59. Revival

    20' Skipjack Flybridge rebuild...

    No, He runs their Facebook page. He has a 24' flybridge diesel power "Eli"
  60. Revival

    20' Skipjack Flybridge rebuild...

    I did! looks like my buddy was anxious to see haha. It went on well but not sure on the height yet.
  61. Revival

    20' Skipjack Flybridge rebuild...

    I didn't have any with me as I wasn't planning on going to boating. No harm done. That dock definitely needs some new rubber...
  62. Revival

    20' Skipjack Flybridge rebuild...

    A friend of mine runs the page
  63. Revival

    20' Skipjack Flybridge rebuild...

    Rebuilt the trailer last weekend and swapped trailers at the dunes. She floats good and with fuel and the outboard I think everything will sit good. Also Built the bench Seat for up top. Hanging the engine this weekend and getting wiring started.
  64. Revival

    Free trailer 20' pos

    I guess the guy who took it said he needed it for his boat and gave me all the reasons why he wanted it. Even made his girlfriend pick it up. Now its back up for sale. Has he heard of Karma? http://orangecounty.craigslist.org/boa/5170301674.html
  65. Revival

    19' Radon project.

    Great Find! you'll have fun with this one for sure
  66. Revival

    Free trailer 20' pos

    Its in newport. I have a guy coming to get it tonight. Boat is not included.
  67. Revival

    Free trailer 20' pos

    Free single axel steel trailer. It's served its purpose as a yard trailer. 20' Skipjack on currenty it. Needs lights / a lot . Rolls well / Going to leave on the street for dead or do a legit trAnsfer for free, will roll for while... Picture is one year old , boat not included 949-378-7595
  68. Revival

    20' Skipjack Flybridge rebuild...

    Your 20' was so clean. Whoever bought her must be stoked! From the photos it looks like a pre 1972 (modified V). Great to see other 20' completely refinished. Great job on this one and your Bertram. My grandpa had 25' Bertram flybridge that had been in the family since 1974 (recently sold to a...
  69. Revival

    20' Skipjack Flybridge rebuild...

    Still fighting the fight! Working through the punch list last weekend and picked up the outboard this morning!
  70. Revival

    25' Skipjack Fisherman (Fishfinder2) rebuild

    Great work! Solid fishing vessel!
  71. Revival

    BD show me your SkipJack boat thread

    That's a great deal, the ones on the 20' are half that size. I'm probably going aftermarket Thank you
  72. Revival

    BD show me your SkipJack boat thread

    Anyone have a set of flybridge side sliding windows / portlights for sale?
  73. Revival

    BD show me your SkipJack boat thread

    Looking Really Clean!
  74. Revival

    20' Skipjack Flybridge rebuild...

    The nonskid is gelcoat mixed with Z spar non skid additive, basically silica sand. You can get the wood at Austin hardwoods, teak and holly plywood. Thank you Bolted the Bracket on, installed the Hulliner on Saturday and my wife rolled fresh gelcoat in the cabin while I cut hatches.
  75. Revival

    adding to the arsenal

    Great Score! Can't wait to see this boat come back to life!
  76. Revival

    Blackfin 25'

    Not mine but solid boat. http://orangecounty.craigslist.org/boa/5132508598.html
  77. Revival

    20' Skipjack Flybridge rebuild...

    Thank you ! I'm going with a f150 yahama.
  78. Revival

    Question about patching I/O hole to make OB.

    I'm in the process of a I/O - outboard conversion. I did the patch myself and it turned out good. I was in your shoes and I couldn't find any boats I truly liked so I found a hull that had good stringers, deck and transom and starting on the rebuild. So far I'm having a lot of fun and learning...
  79. Revival

    20' Skipjack Flybridge rebuild...

    Put in a few hours getting the cabin walls installed, test fit the new starboard center hatch and drilled the holes for the bracket but got rained out. It looked really good from the test fit. Just a side note that the template that comes with the bracket rocks! So easy! Hopefully I'll bolt it...
  80. Revival

    Spent some quality with my son

    Nice! I'm just rigging my boat now and glad to hear the performance is good. I'll be putting a F150hp Yamaha and hydraulic Tabs.
  81. Revival

    Spent some quality with my son

    Spear-fish, How are you liking your skippy outboard so far?
  82. Revival

    Ocean LED Giving Away 2 A4 Xtreme Underwater LED Lights!

    #oceanLED project build
  83. Revival

    20' Skipjack Flybridge rebuild...

    Thank you! Good question, This was stainless marines recommendation. They said that the engine tilt will compensate for the 1 degree. They stock brackets that work for a variety of boats and it's common to round to the closest degree. It was more $ and 3-6weeks to get a 10degree custom bracket...
  84. Revival

    20' Skipjack Flybridge rebuild...

    Yes, and no, if you don't leave any valuables. Cameras keep an eye on the place. I don't leave anything out there. Its easier for me to load up the truck then getting to the yard and having no tools...
  85. Revival

    20' Skipjack Flybridge rebuild...

    The angle for the transom is 10 degree's. I went with the 11 degree model with a 26" set back. http://www.stainlessmarine.com/shop/26-single-bracket-offwhite-11/ I'll follow up to how it fits on the boat once I get it installed
  86. Revival

    20' Skipjack Flybridge rebuild...

    Thank you! Of course wildside!
  87. Revival

    20' Skipjack Flybridge rebuild...

    Tired of waiting on busy marine fabricators. I just called up Stainless marine and they had the bracket size i needed in stock and should be here next week. Great people and very knowledgeable. They are also giving 10% off on in stock brackets. Plus it comes powder coated, and includes all...
  88. Revival

    1991 Stringari 18 ft Cuddy repower

    those number are good! I like the sound of that warranty too. 6 years is solid.
  89. Revival

    1991 Stringari 18 ft Cuddy repower

    How are you liking your new Suzuki 175 so far? I'm between a yamaha 150 and a Suzuki 150.
  90. Revival

    Wood question...

    I was just over at Minney's and they had some non skid type in the wood room
  91. Revival

    Starboard for decking

    I'm using 3/4" diamond pattern starboard for the fuel tank hatch and to cover the area where the engine once was. I wouldnt use it to rebuild the decking though. Glass is a must for a project like that.
  92. Revival

    20' Skipjack Flybridge rebuild...

    Can anyone recommend a reliable welder that can build a bracket ?
  93. Revival

    20' Skipjack Flybridge rebuild...

    I'll be installing all the deck hardware, Cleats, rod holders and rub rail before I run any electrical / running rigging. Everything on this boat is very accessible.
  94. Revival

    20' Skipjack Flybridge rebuild...

    Nice! Welcome to bloody decks! How fast does the boat go with a 225? Post some photos !
  95. Revival

    Little TLC on a radon 18'

    Excellent work! You definitely had a vision with this one. Looks like a sweet ride!
  96. Revival

    20' Skipjack Flybridge rebuild...

    I polished the hull, flybridge and reunited them back together. Rolled the nonskid on the bow and along the sides, I'll be doing the interior deck once ive wrapped up most of the rigging. I built a stainless bow plate for the anchor roller and a teak holly cabin floor that I saved from being...
  97. Revival

    20' Skipjack Flybridge rebuild...

    The white filler is west system with 404 filler. I used that to fill the voids and old screw holes on the transom. Still working on some final wet sanding and I'll be polishing by next weekend. no photo update till next week.
  98. Revival

    skippy stern rail

    I have a one for a 20' for free also a bow rail. Might need hardware.
  99. Revival

    20' Skipjack Flybridge rebuild...

    Thank you! Working on getting her put back together!
  100. Revival

    BD show me your SkipJack boat thread

    Looking good guys!
  101. Revival

    Whaler Drain Tube Replacemment

    Did you go with brass or glass?
  102. Revival

    BD show me your SkipJack boat thread

    Im aware of the difference in hull shape, I've got the modified v or 16 degree deadrise. Just posting free art for anyone that wanted a line drawing.
  103. Revival

    BD show me your SkipJack boat thread

    Just found this skipjack rebuilding - very impressive work! http://s1360.photobucket.com/user/dirtydiego41/media/skippy/IMG_0104_zps6pfdaamd.jpg.html?o=0
  104. Revival

    20' Skipjack Flybridge rebuild...

    I've been really busy lately but found some time to get some work done. I wet sanded the hull and flybridge with 320 then 600 and lastly 1000. No more orange peel! Once I finish the deck / cap rail wet sanding I'll be polishing the entire boat. I have saltwater specialties coming next week to...
  105. Revival

    Whaler Drain Tube Replacemment

    Vhf antennas are made from fiberglass. Use a hack saw to cut a section that is similar in diameter and length as the brass and then glass or use west system to glue the piece in.
  106. Revival

    Whaler Drain Tube Replacemment

    old vhf antennas work great. That and some west system.
  107. Revival

    BD show me your SkipJack boat thread

    a few edits of the line drawing from the original 1968 brochure - skipjack 20' open and flybridge. Going to make some boat cups with these for sure.
  108. Revival

    BD show me your SkipJack boat thread

    Nice skippys josh!
  109. Revival

    1991 Stringari 18 ft Cuddy repower

    What size shaft did you go with on your suzuki?
  110. Revival

    24ft skipjack rebirth

    Go to aaa, dmv eats times
  111. Revival

    24ft skipjack rebirth

    Must be pre 1971 as the deadrise is not as deep as most 24' you see. Mine is a 1969 and came with title but no hull number engraving. Have you checked out the core on the transom and stringers? Great project by the way!! Can't wait to see some progress!
  112. Revival

    24ft skipjack rebirth

    I was in your shoes with a 20' flybridge. I'm just wrapping up the gelcoat and will begin rigging soon. Lots of hard work ahead but you got the right idea of throwing out all the old stuff.
  113. Revival

    20' Skipjack Flybridge rebuild...

    Did some more work this weekend. I was able to spray the deck, flybridge and interior. Now for nonskid, wet sanding and polishing. So stoked that it's coming together! Can wait to reunite the flybridge to the hull.
  114. Revival

    20' Skipjack Flybridge rebuild...

    I sprayed 4 coats total. 3 of bright white and 1 50/50 Durtec to white. Wanted to make sure there wasn't any burn thru when I color sand and polish.
  115. Revival

    Introducing Mag Bay Yachts

    Phenomenal Work Barrett! Blown away by the attention to detail! Keep it up!
  116. Revival

    20' Skipjack Flybridge rebuild...

    Been putting some time in on the skippy. Made some progress over the weekend... Should have the deck and fly bridge done next weekend.
  117. Revival

    28' skipjack pilot house

    I've done 2 boat deals with them and it was relatively easy considering they were on base. Just make sure you call to schedule pick up and follow directions to the T. The Military doesn't mess around.
  118. Revival

    28' skipjack pilot house

    this skippy looks clean for it's age. Might be able to get it for cheap. http://www.govliquidation.com/auction/view?auctionId=9186158&convertTo=USD
  119. Revival

    20' Skipjack Flybridge rebuild...

    The cap rail /cabin house was free after I cut out 75 bolts. The deck is a separate section that is glassed into the hull. you'll probably need a crane to take the top section out assuming the deck is attached and you can get access to the tank. Also I bet there is a ton of wiring/rigging that...
  120. Revival

    1991 Stringari 18 ft Cuddy repower

    That's the boat! Great little skiff. Hopefully its getting used. I appreciate the paint info!
  121. Revival

    1991 Stringari 18 ft Cuddy repower

    Your doing really clean work. What type of paint did you use to spray your bracket? Zinc,?,? I tried to buy a boat very similar to yours with a green hull 5 months ago but it sold in the first day it was posted. He wanted $7500. I'm now doing a similar conversion on a 20' skipjack and...
  122. Revival

    20' Skipjack Flybridge rebuild...

    More photos. Parts keep showing up... Found a new 52 gallon tank off Craiglist for $125 that fit perfectly.
  123. Revival

    20' Skipjack Flybridge rebuild...

    Photos
  124. Revival

    20' Skipjack Flybridge rebuild...

    I finally got some progress done this past month. I got the transom plug glassed in and the back combing glassed straight across. It use to be u shaped for the engine box and I didn't like the look so I cut it out. I also built 8 supports for under the rails. The cap rail is super solid now but...
  125. Revival

    Ok here we go again Im a idiot 20ft Wilson

    How does the finish turn out when you brush gel? Are you using any thinner? Seems like less of a mess than spraying.
  126. Revival

    ideas for 15' whaler center console

    I did a full restoration on a 15' Whaler a few Years ago. Great boat but I wish I did something like ^^^. You can buy Consoles on Ebay for $200 Ebay. Here's a few photos. Currently in the middle of a 20' skipjack fly bridge project. The 15 Wasn't ideal for the Island. Great inshore boat. Amazing...
  127. Revival

    BD show me your SkipJack boat thread

    Any one have a set of skipjack emblems for sale? It's for a 20 FB. Pm if you do. Thank you
  128. Revival

    20' Skipjack Flybridge rebuild...

    Rock lobster Your boat is super custom. Great work! Batteries are going aft in a blue sea box.
  129. Revival

    20' Skipjack Flybridge rebuild...

    I'll be taking my time to make sure its done right. At this stage I'm focusing primarily on structural and cosmetic items so I spray gelcoat. Winter is the best time for boat projects.
  130. Revival

    1984 28ft SKIPJACK resto

    I just read through the entire thread. You and your wife have done a great job at rebuilding this boat. Huge difference between before and after photos.
  131. Revival

    21' Boston Whaler Guardian re-build

    Very cool rig! You'll be on water soon. Nice job keeping the boat simple and clean.
  132. Revival

    20' Skipjack Flybridge rebuild...

    Now that I'm past the oh shit what did I get myself into stage I'm beginning to make some headway. Over the past month I've removed the fly bridge because the backards were rotten and it will be much easier to work with off the boat. I'll be filling all the old gauge holes and starting fresh...
  133. Revival

    Skipjack power

    Thanks for the heads up. I might add scuppers but I'm not there yet.
  134. Revival

    Skipjack power

    Im putting nonskid gelcoat on the deck. The deck will be made to get wet.
  135. Revival

    Skipjack power

    I'm trying to figure this out as well. I don't believe there is whole lot of difference between a 150 and 175. I'm more concerned about what the max hull speed was designed for. I'm leaning towards a 150. Check out this thread for some performance specs...
  136. Revival

    20' Skipjack fly parts

    Steps/ coolers
  137. Revival

    20' Skipjack Flybridge rebuild...

    Nice! I'm going to be installing a similar bracket once I get to that point. On Sunday I cut out the false deck in the engine and fuel tank channel. I used a diamond blade on a angle grinder and the glass cut like butter. The stringers are good and solid. Here are photos after I washed the...
  138. Revival

    20' Skipjack fly parts

    I'm selling/trading a few parts from my 1969 skipjack. 2 Ice Box / Storage steps Stern Rail Engine Hatch 5 Pull Switches Individual Gauges Cleats fly bridge hand rail end fitting other misc stainless / brass fittings Things I need for trade- white gelcoat duraglass polyester resin marine...
  139. Revival

    20' Skipjack Flybridge rebuild...

    Thanks fishbones, just had a chance to clean the boat out this evening, I found a ton of stainless parts, cleats, stanchions, a roll of canvas, trailer parts(need these, I thought the trailer was going to explode after the 70mile trip from Newhal) 50 gallon SS fuel tank (stoked!) and some...
  140. Revival

    20' Skipjack Flybridge rebuild...

    Well after being boatless for a few months I've taken what I learned on the 15' whaler rebuild and decided to step up and get a hull that I can do overnight trips to the Island. I really liked the lines of the 20' Flybridge and plan on repowering her with an outboard on a bracket. Time to let...
  141. Revival

    Do you still own your skipjack? Would you consider selling it?

    Do you still own your skipjack? Would you consider selling it?
  142. Revival

    Bait tank 10-12gallon fs

    Just posted it on craigslist, perfect for a skiff. just lowered price. http://orangecounty.craigslist.org/boa/4223213290.html $80
  143. Revival

    crossing on whaler

    I do it all the time on my 15' whaler. I leave early and always watch the weather.
  144. Revival

    Jet n Cat build

    Looks like a kill switch goes there.
  145. Revival

    SkipJack 20' open restoration

    Congrats on getting hitched. I need to check out the finished product in person.
  146. Revival

    1977 Bertram 26 Flybridge Sport fisher

    I'm posting this boat on behalf of a friend. Its a great boat and needs a good home. This boat has been Dry kept on a trailer and covered her entire life. The gel coat is all original and still has a deep shine. Bilges are clean and dry. All stainless is in very good condition. The Anodized...
  147. Revival

    SkipJack 20' open restoration

    Josh, Your boat is turning out to be one sick ride. Cant wait to see more progress. Night and day different between when you first got the boat and now. Its like your boat mated with a crystalliner lifeguard boat. Well done dude!
  148. Revival

    New Bayrunner WELDER Person

    These Guys are really good- Marine Fabricators, Westporter Boats Inc 921 W 18th Street Costa Mesa, CA 92627
  149. Revival

    15 Whaler Re Restoration

    Nice work ! The boat looks great so far!
  150. Revival

    What's the best way to adjust new throttle and shift cables?

    I agree- Its always a good idea to get a pro to check it out if your not sure.
  151. Revival

    16-18 trail-rite trailer

    Selling my Trailer, worked well to get me around town. She may not be the prettiest looking but she rolls and has sweet crome rims. Needs lights to be checked out and a new yard wheel wouldnt hurt. I'm getting a newer galvinized sometime this week. I figured Id post this to see if anyone wants...
  152. Revival

    What's the best way to adjust new throttle and shift cables?

    I was going to reprop but I checked my cables and got 1000rpms more with a simple adjustment. Now my boat runs at 6200-300 wot (Scary) @ about 43mph. Only went wot for a little bit until I chickened out haha. I adjusted the cable ends on the engine and shifter side until the throttle was fully...
  153. Revival

    USED and NEW FIBERGLASS BAIT TANKS

    Interested in #6 949-378-7594
  154. Revival

    OCC Marine Gear and Auction Sale

    There is a blackfin cc cuddy 24' up for auction that i have been on about 3 years ago. It has teak decks and twin engines. Its a very nice boat. I'm pretty sure its been sitting in storage for about 2 years. This boat is going to go for a steal.
  155. Revival

    OCC Marine Gear and Auction Sale

    Every 2 years OCC has a big sale with tons of gear for sale and boats at auctions. This a great way to get a project boat for cheap or get that part you don't want to pay full price for at WM. I'll be there early.... Also the Pacific Sportfishing Fest is going on across the street at the fair...
  156. Revival

    OCC Marine Gear and Auction Sale

    http://www.occsailing.com/sites/default/files/images/about_us/boats_for_sale/blackfin1_sm.JPG Black fin hmm.... clean boat
  157. Revival

    OCC Marine Gear and Auction Sale

    Every 2 years OCC has a big sale with tons of gear for sale and boats at auctions. This a great way to get a project boat for cheap or get that part you don't want to pay full price for at WM. I'll be there early.... Also the Pacific Sportfishing Fest is going on across the street at the fair...
  158. Revival

    2008 F50 Yamaha and FE trailer

    I need this for my 15' whaler please call me 949-378-7594
  159. Revival

    Bertram 30 Build

    Bertram's are by far my favorite yacht. Ive spend many many days on my family's Bertram and numerous friends Bertram's. Extreme seaworthy classic looking. Congrats on a great yacht.
  160. Revival

    The New Battle Wagon (Custom Skippy)

    Very Cool boat skippy. I like the flybridge on the 28' Unique combo. Where did you pick it up at?
  161. Revival

    SkipJack 20' open restoration

    How to.... Nice!
  162. Revival

    My first Boston Whaler "El Borrachito"

    Fishkid- Just got on BD and notice that you bought my 9' whaler! Really stoked the boat went to a good home! Very fun little boat. Cheers
  163. Revival

    Here is my rig !

    Nice rig! this thing is perfect for solo bay fishing !