Search results

Good one @skrilla !

Is this the 2020 model?

Thanks!

Nice! I've been on the hunt for a GF800XLH. Did you pick that up at a shop, or private seller?

Stoked I signed up and watched. Thanks for putting this together!

I made these a couple years ago, specifically to finish off my FG knots. Wood dowel and heat shrink tubing

Looking for some first hand knowledge on how well these can cast a live bait. In particular, the 20 size is what I'm most interested in. In the shop, free-spool seems amazing.

Did anyone here get any YFT in December, within 1-day range, out of San Diego, last year? We had limits of YFT, on November 17th, last year. Didn’t get out after that. Just curious. Jason

Super tasty and very easy to put together, I highly recommend!

My daughter kept insisting I try and make some poke nachos, just like the ones from The Yard House. This past Wednesday 11/04, we had very good fishing, for yellowfin tuna and dorado. Rainy day here in Carlsbad, so decided to try something different with the tuna. I deep fried the wonton...

I'd say 10lb +/- We had a couple in the low teens. Like I said, not very big, but loads of fun with the right gear. We did not catch any tuna that were 5lbs.

White knuckle drive down the 5, from Carlsbad, at 4:30 this morning. Fog was so thick, I had to slow way down, like 20mph at times. Cleared the Mission Bay channel about 6:30, with absolutely no fog, with 1.5 scoops of awesome sardines. Headed south and stopped on a couple empty paddies, just...

I actually still have one of these, along with my bubble & feather rig...just in case...:D

I'm looking for either of these blanks for a custom rod. Not looking for a factory wrapped rod. If you have one for sale, or know where I can get one, in San Diego, or OC, let me know, thanks! Jason

Black Hole Challenger Bank S-801H This ad is still up...

WTG, glad you ended up getting a few...thanks for posting your report!

That Shamrock is a fish magnet! :D

We stopped at the Islands, yesterday, on our way back from our trip further south. Slow trolled sardine got us a nice 18-20 pound YT. This was about 6pm. Also caught a nice barracuda and some jumbo bones, in the same area. Finished off with some reds at the middle grounds, fishing into the dark...

Same kelp, my buddy hooked into a larger fish that we didn’t get to see. May have been a bigger yellow, or one of the tuna we saw. Wasn’t jumbo, just bigger than the tiny yellowtail that we also caught on that kelp. The dorado I hooked, was at least 3 times bigger than the micros we caught a...

We were down in that area (371ish) yesterday. Found a very nice kelp, that had a LOT of tuna on the meter. They (YFT) came up very briefly and only boiled on the live chum and wouldn't touch our sardines. We were using #4 J hooks and 15# flouro. I had a brief hook up on a nice 10lb+ dorado, on...

:eyepoppin Wow, awesome score for whoever got that!

Super clean Monster ready to fish...

OK

bumpo

RCE 800XF-C has been sold, thanks! @samso005 Jason

I've only used this rod once and it is in excellent condition. I'm not interested in trading this rod and don't want to ship it either. I work M-F in San Diego (Rosecranse/5) and live in Carlsbad. Willing to meet anywhere along the 5 M-F, or at the Dana Landing launch ramp. RCE 800XF-C SOLD RCE...

My 20 and 30T are used on every trip I take, inshore and offshore. Whoever gets these will be very stoked! GLWS

I'm searching for a new rod to put my Lexa 400 on. When I bought the reel, I also bought a Monster 800 factory wrap. I caught a few 12-15 pound Coronado Yellows on this rig. Casts very well for sure (Tady 45)!!! Only problem is, that when under load, with the fish straight up and down, the line...

Very nice pic, your son looks stoked!

Yo-Zuri Popper The Dorado in my avatar was caught on one of these, almost 20-years ago. Get the larger size. I've caught lots of YFT and quite a few dodos with this lure. Not too expensive and available at several local retailers.

Only Sealions we saw today, were at the bait barge and this punk looking for a free meal at the slip. No dogs on us at the islands.

We each took our 5 fish limit. These fish were about 15#, maybe a bit bigger.

Headed out of Mission Bay about 8am, after loading up a full scoop of excellent sardines, with a few mini macs mixed in. The short interval wind chop made the ride down a bit interesting, but easily doable. Stopped on a giant bait ball of small chovies and had some fun with the little bonito...

This past Wednesday, I fished between Moonlight and Stonesteps, and saw plenty of sand crabs. I used the bloodworms I bought and landed 2 spotfin (1 jumbo) 2 small corbina and a small leopard shark.

Okuma Komodo SS KDS-463P Loaded with 65# J-Braid Good condition $160 PM if interested

I replaced a much heavier popping set-up, with this much lighter one. It' a Black Hole Challenger Bank S-801MH, paired with a 2016 Daiwa Catalina 4500H spinning reel. This thing is great for throwing the smaller poppers I like to use.

Excellent info, thanks for sharing.

Thanks for having me along yesterday, Dan! So stoked to get that fish on the popper!

Fished on my friend Damon’s 26 Shamrock today. Nice sardines from Mission Bay. Started west of the 302. Jumping YFT in this area, good size ones too. Ended up in the 371 area for most of the day. Kelps were holding YT and we landed 1 YFT near a kelp in this zone. YFT were pretty scattered and...

We were actually targeting Yellowtail, not knowing these jumbo BFT were going to be interested in the Sardines we were fishing. Most every boat, in that area, was flying the kite/balloon rig. I hooked up first, using 30# and got busted off after about 10 minutes. After getting smoked by that...

126# on the scale this morning at the Dana Landing Fuel Dock.

We were fishing near the upper hidden bank today. Several boats doing the kite thing. We only fished sardines. Threw chum on meter marks and went 1 for 3 on the jumbo BFT. They bit 50# no problem. All 3 hook ups came near kelps we stopped on. Picked up a nice YT too. Water conditions were nice...

This reel is in excellent condition. 500yds of 80# Berkley ProSpec, loaded by Ken’s. Blueprinted by Cal’s. I have the original box and the receipt from Cal’s. $290

I will be getting either a TRQ25NLD2, or a TRQ30LD2. I will be putting this reel on a UC Predator 76. This rig will be used for fishing live bait most of the time. I want to fish mostly 50# top shots, 60# if necessary. I fish on a PB out of San Diego. I’m favoring the 25N, but have the extra...

Captain said about half way to Hawaii from here!

Seaport Village, in San Diego Bay. I was down there a couple hours ago. Just walk up to the boat in the pic. The piece I got, came from the fish he is cutting.

2.4lbs of Bigeye Tuna

Has anyone checked this out yet? I wouldn't mind picking up a couple pounds, before heading home today.

This rod is still available. Price has been updated. Like new condition. $125 OBO

November 17, 2019 was an epic day for us, fishing the YFT, just a few miles south of the Coronado Islands. Easy limits for the three of us. Heavy chum kept the action going... notice the small bait ball near the boat. :D Unbelievable fishing, for that time of year, at least for me!

Black Hole has 10% off and free shipping, till the end of March. Buy 2 and get 15% off.

Will update with pics of the SW8000 after work today.

Got it. Saragosa SW8000 is still for sale.

I updated the ad. The Black Hole rod has sold. The SW8000 is pending pick-up tomorrow.

Willing to ship the reels bump.

Bump

Updated...

The Shimano Saragosa shares several design features of the much more expensive Stella. This is quality gear in great condition.

b u m P

Agreed!

This Daiwa Proteus 70MFS is in excellent condition. $125 --> OBO <-- Both of the Shimano Saragosa reels have been sold, thanks Brett! I live in Carlsbad and work M-F in San Diego I'm not looking to trade this item, thanks.

Hit up Jamie at Bob Sands, as they sell Black Hole rods. That's where I bought mine.

Any more pics of this reel? Condition? I'm in Point Loma and would like to check it out. Sent you a PM.

Edit... I see you are in Torrance.

How you intend to use the board, will determine the type of board to look for. I live very close to the Agua Hedionda Lagoon, in Carlsbad. I chose a "touring" style board to paddle in there. I have an Amundson Hawaii 12'6" and bought it used, in like new condition, for $650. That was a $1400...

That's so cool and your son looks very happy sitting there!

Nice video, thanks for sharing.

I am the original owner of this Daiwa Saltiga 30T. It has approximately 260yds of 65lb Berkley Pro Spec, solid white braid, topped with approximately 65yds of 40lb P-Line original. This reel is extremely easy to work on and has been routinely serviced be me. Upgraded Carbontex drag washers too...

Approximately how many yards of the JB Hollow?

Just checked it out, now you have another. Good luck Anthony!

We resorted to slow trolling, when we were not getting bit, with the tuna showing on the surface. We got bit pretty quick (slow trolling), if the tuna were busting the surface. Not so much when they went down. We were using 20#. 7 fish for 2 of us yesterday and 6 were taken slow trolling. Hope...

Sardines

We scored a few fish today, a bit NE of the 371. Slow trolling got most of the fish.

Thanks for taking the time to post your trip report. You have great attitude and you will get them next time! :cheers:

Nice job, congrats!

Not sure what route your taking to get to San Diego, but if you're passing through Oceanside, Ken's and Pacific Coast Bait & Tackle are easy to get to and provide what you're looking for.

Outstanding!

I just wanted to clarify which brisket I was referring to, that I get at Costco. I get the Prime “full packer”, which is the point and flat, still connected as one piece. You can also get the “flat” as a separate cut, which is usually Choice grade at Costco.

Costco Prime is my choice too.

We were using #2 and #4 circles yesterday and getting bit pretty good. 15# and 20# test flouro. There are some decent bluefin mixed with the yellowfin, so keep that in mind. We hooked 5 (bluefin) and landed 1. The bluefin was 42lbs on the scale at Mario's.

Good stuff, glad you found some biters!

@Swampchicken Thanks to your post, I finally decided it was time to try this. I used my 26" Weber Kettle and a few sticks of apple wood for smoke. Delicious, and easy too!

Nice, that's gotta be a major adrenaline rush! Thanks for posting that up.

Looks easy enough, I'm on it, thanks for the inspiration!

I had a thru-hull bait pump on my kayak, as well as a thru-hull transducer. I did the install myself, so I knew what/where to keep an eye on things. Zero issues with leaks, or beach launching/landing. Awesome set-up.

Did these tuna bite for you guys?

You shouldn't have a problem finding parking in that lot, this coming Saturday.

Thanks for the detailed report, Steven!

Sent you a PM

I was in there, what must have been only a few days before his trip. Pretty sure I heard him talking about this trip with his coworker. Stoked for him...WTG Dawson!!!

Good stuff guys, I'm digging all of your input on this topic!

I always did about 4'-6' You fish this rig like you would a popper, for the most part.

I had lots of fun catching Bonito in King Harbor in the early, to late 80's. The "Bubble and Feather" was what my friends and I used almost exclusively. I want to catch one again, using the same method. These Rockfish rigs are almost identical to the feathers I used in the past. The rigging...

WTG...that's outstanding!!!!

I took a small spinning outfit with me to Morea years ago. I fished off the dock at the resort we were staying at. I only used a bubble and feather rig, just like I used for Bonito in King Harbor as a kid. I actually caught a fish very similar to a Bonito. This was way before the internt, so I...

Nothing but positive thoughts for you Cory!

Great day of fishing, Cory...congrats!!

Don't forget to factor in the cost of braid for the reel.

Quality work, I really enjoy watching these!

bump

Price adjustment on the Calstar. I sold the Okuma this afternoon.

:Singin_In Bump for a rainy Saturday morning.

If the offer still stands tomorrow, I’d take a bit of the BFT. Left SD before I saw this!

This rod is in excellent, like new condition. Calstar Grafighter GFGR 700 XLH 7’0” 15-25lb. SOLD

Lowered price a bit.

Bumpday...:D

Bumpday...:D

Still available. :cool:

I found the original handle for this reel, if it makes a difference . :cool:

Super Bowl Bump

Super Bowl Bump

Dropped the price a bit.

:food-smiley-014:

This reel is in excellent condition and ready to fish. It's loaded with fresh 65# Power Pro Braid (approx 400yds). Hasn't been fished, since it's last service at Accurate. SOLD I live in Carlsbad and work in San Diego M-F.

Still available...:cheers:

:hali_olutta:

This rod was only used one time and is in excellent condition. No fish hooked, or landed on this rod. Phenix Axis HAX-720-X2H (40-100) SOLD I live in Carlsbad and work in San Diego M-F

I believe the Saragosa 8000/10000 have the same body, just different spool sizes. I called Shimano to confirm this and they said a 10000 spool will fit the 8000 body. I was ready to buy the 10000 spool (I have the 8000), but they were back ordered. If I remember correctly, I was quoted $79.00...

I also have a Black Hole CB 801H, with a Saragosa 8000SW. This set-up is pretty well balanced for my liking. I currently have 60# Threadlock on the spool. I ended up with this set-up, after the same research you are doing. The Halco Roosta 160 casts just fine and can imagine the Heru will cast...

I haven't used the other reels mentioned, so can't compare. But, I do have a Komodo 463 I picked up last year and have been using it mostly for rock fish. It really excels in this application and I'd highly recommend it.

Good job you guys! That's some awesome fishing close to home!

I use my 8' PCH Heavy, with a Komodo 400 size for rockfish. I mostly fish jigs with this set-up. Works for me.

WTG guys!

Very nice account of your time on the water, sounds fun! Congrats on all of the catching!

Ken's Custom Reel in Oceanside has Pro Spec.

I did these a couple years ago and they were very tasty. Only difference is that I used teriyaki sauce here.

Thanks for taking time to post your report Vic. Much appreciated! Glad you guys got a couple!

Enjoyed your detailed report and pics, thanks for sharing. Congrats on the jumbo BFT!!!

Thanks for the detailed report, sounds like a good day to me!

Hey Roger the_tunaman, thanks for the detailed, first hand report...Just awesome!!!

Where are you located?

You had a plan, stuck to it, and we're rewarded for your effort! Congrats on the catch and thanks for the detailed report!

I made this bowl of ceviche with the assorted rockfish and trim from the ling. These are a couple chunks of ling, coated in Panko crumbs. I made some mango salsa to go on top. Grilled over lump charcoal on my weber kettle.

Gary, thanks for the invite to fish on your boat, much appreciated! Surprise catch on the flat fall jig, super stoked!

Good job on that WSB, congrats!

Thanks for taking to time to post up a report of your trip Mike, much appreciated!

Thanks for the report Josh! :cheers:

Corey, your video brings me back to where it all started for me in 1980, thanks for posting! 4# test on trout gear at the "bend". I'm stoked to see the bonito still doing their thing there. Jason

Thanks for the report, very encouraging news!

Looks great, nice upgrade!

The Dana on Mission Bay is my favorite. I used to slip my boat in their marina. Before that, I'd get a room there and use one of their guest slips for the night. A little spendy for a night and to fish La Jolla, but always had a great experience there. The dock master, Ted, is an awesome guy and...

I work in San Diego, Monday through Friday.

Sunday afternoon price reduction! SOLD

I plan on getting a PCH for my Komodo. I'm going to the Long Beach show with friends and will hopefully pick one up there.

Bump

Bump

Shimano Saragosa 8000 on a Black Hole Challenger Bank. I believe the rod is a 801H. Can’t verify at the moment. Pretty sure that’s the model though.

I am getting the Okuma PCH 8'H for my Komodo and will give the poppers a go with this set-up. I already have a solid spinning set-up for throwing poppers, so the Komodo/PCH will just be another option.

I'll ship, at buyers expense.

I live in Carlsbad and work in San Diego.

bump...

bump...:D

Awe crap! Sent from phone... Fixed it, thanks!

Daiwa Proteus PRTB76HF 7’6” 20-50 lb Mono Brand new and in perfect condition. SOLD

Nice meeting you, Carlos. Reel is as advertised and I'm stoked, thanks! Jason

Not sure if it was mentioned already, but get some of the KJ lump while it's there. Quality lump at a great price.

Great question Nate, I'm curious to hear what others have to say on this as well. I believe that the 2-pieces make it possible to ship them, as well as getting them on an airplane. I just went through the process of trying to get one off the rack, locally (Phenix/Proteus), but ended up with a...

Looks like you guys had a great trip and ate very well! Thanks for the great write up!

Me too! Although I didn't actually make the drive from San Diego, I had a positive buying experience, with the help I got from Jamie.

I have the roosta too...:D Thanks to the suggestions I got here, I ended up with a Black Hole Challenger Bank Popping Rod. The fish in my avatar was caught well over a decade ago on a YoZuri Hydro Tiger. I still have that lure too. I already have the Heru Skipjack and want to get it rigged...

I Have A 90g Skipjack, So I picked up the ST-66 3/0 and some #9 Hyper Wire Split Rings. Good to go? The hooks seem kinda big to me, but haven't put them on yet.

Thanks for the quick reply, Dave. I'll keep looking...

Do you happen to have a part # for this Accurate handle?

This Saturday, from 9-3.

Thanks for all of the input guys. After a bit more research, I'm pretty certain I'll end up with a Black Hole popping rod. The main use for this setup is going to be throwing poppers/surface jigs, so I want it to really excel at that first and foremost.

Thanks for the feedback Mark! Im finding a lot of positive info on the Black Hole rods. I looked on their website, but couldn't find that particular model.

Thanks for the reply David, much appreciated. I'm also considering the Diawa Proteus line of rods. If necessary, I can increase my budget a bit. Like I said, I'm open to suggestions as well.

I have a Shimano Saragosa SW8000, that I need a new spinning rod to pair up with. This rig will be used locally, to target tuna and dorado on the kelps. Throwing poppers for the most part. 30lb-50lb leader is what I have in mind. These two rods are in my budget and appear to be very similar to...

I have a Shimano Saragosa SW8000 that I need a new rod for. Would you guys think the Phenix PSWS-760H is a good match for this reel? I'll use this set-up on a PB, mostly throwing poppers for dorado and tuna. My budget is $300ish. Fishermans Landing Tackle Days is coming up soon, so I'll probably...

Great job on the limits! I'm pretty sure I saw you guys on the road yesterday and actually commented to my daughter about your nice boat!

PM sent.

The birds were crashing on this baitball for over an hour this morning.

I figured this might be a good time to bring this back up. Jason

Here ya go. This will get you going and is a very capable fishing kayak. http://www.bdoutdoors.com/forums/members-boats-sale/372847-ok-scupper-pro-tw-400-a.html Jason

Sorry guys, I did sell the saw and forgot to edit the ad. I will fix it now. Jason

SOLD

SOLD

Alright Aaron, see you in the morning.

SOLD

GONE!

SOLD

My wife called Paradise Point yesterday and asked that exact same question. Their answer was NO fireworks this year. Big bummer, as that is/was our favorite place to watch them. Jason

Just a quick report for those thinking of going tomorrow... I fished today with my good friend Damon, on his 26' Shamrock, at the Rock Pile. Arrived around 8:15am, anchored up in 85' of water and had our first fish on the boat by 9:30. Between 9:30 and 12:30 we had 9 YT pick up our sardines...

SOLD

Sold

SOLD

SOLD

Jesse, I shipped the registration cards on Friday. Jason

SOLD

modified original post...

SOLD

This guy is right off of the 5 and Leucadia Blvd. I'm not sure how his prices compare, but he is in North County. Lyman's Firewood - Your Source for Quality Fire Wood in San Diego County Jason

The Tarpon that you have for sale is one that I would check out, if I was looking to buy a used paddle kayak. I was just giving the OP another option to buying a used yak off of CL in Santa Barbara.

Peter, check out this thread on the kayak forum here. Some good deals to be had for sure. http://www.bdoutdoors.com/forums/kayak-fishing/239758-malibu-kayaks-oex-factory-sale.html Jason

This same guy just posted on BWE that it is his kayak that they found on or near the jetty in MB today. At least that is the way I understood it.

Out of the two you are asking about, I prefer the CDM's. The MJ's that I had, had some sort of coating on the back-side of the lens that wore off after a short time and was noticeable while wearing them. I have really sensitive, messed up eyes, and need the best optics I can find, otherwise...

If these guys don't have the time(Fred Hall), I can handle this stuff. Jason

I read somewhere that the Charter Specials are essentially the same reels at the TLD5 and TLD10, except with a level-wind. I imagine that the level-wind could be remove fairly easily. Anyone know if there is any truth to this?

Thanks for the offer, but at this point, I would prefer cash. I'm not in any hurry to sell it.

Damn, posts drop quick in this forum.

Calstar GFGR • 700-XLH in very nice condition. $140.00 If you have a GFGR • 700-L in similar condition, I would be willing to do an even trade. I will not ship the rod. PM me if you are interested. Jason

This is the one that I have. Last time I was in there, I was told they no longer sell them.

I have an offset smoker and use it quite often. I use the lump charcoal from BBQ's Galore and hardwood chunks (not chips), soaked in water. I can get 6-8 hours of consistent heat (220 degrees) from one load of coal in the chamber. I cut the split hardwood logs down (approx. 3"x3"x4") to fit in...

Doesn't need to be new or in mint condition, some boat rash is ok. I'm looking for a local transaction. PM me if you are looking to sell either model, or have both. Jason

The Calstar looks brand new, thanks Dustin.

I have a 700xlh I'll trade you for the 700ml. :D

I'm interested in the 700ml, PM sent. Jason

sold

I'm reducing the price for everything to $100 to get this stuff out of my garage. Jason

I think it will also remember words that you type frequently.

These four hoop nets are fully rigged and ready to use. Includes everything you see in the photo. $120.00 for all four sets. If you plan to use these on a kayak, I also have this cradle that I made to fit my Trident 15. It is not glued together, so it could be modified to fit other...

Brand new, never worn, Kaenon sunglasses. Model: Jetty Color: Seaweed Lens: Gray Polarized (G12) These retail for $200 I'm in Carlsbad $150.00 FIRM Jason

Are your kids big enough to paddle on their own? If so, how about just getting two smaller kayaks? I believe the mini-x is less than 40 pounds. Jason

On Sunday, we were catching large Leopard Sharks on live Mackerel, right in front of the power plant. The sharks were just past the surf line in about 10'-15' of water. All of them were good size and put up a great fight. Jason

I purchased a Garmin 440S from West Marine and the thru-hull 'ducer for it. They matched the lowest price I found on-line, including the free shipping. I had to pay tax though. I paid $402.12 for the 440S, not including tax... Jason

Wire it straight to the battery with an in-line fuse. The one I have on my kayak is wired like that and it works perfectly. You can also hook that up to a VHF radio (NMEA device) with DSC, if you want. Jason

Jeph, I would be interested to see what you come up with. I don't know if you saw my post on BWE or not, it might give you some ideas. I wanted to add this pic to the post, but I can no longer edit it. Rigging a Trident 15 (Electronics) - Kayak Fishing Adventures on Big Water’s Edge...

Damn, I wasn't aware that the dealer had to do all of that! I'm sure the guys at OEX can track down the hatch you need. If all else fails, try calling Ocean Kayak... Phone: (360) 366-4003 or 800-8-KAYAKS. I have called them before and got great customer service. Jason

That's weird, every Scupper Pro/SPTW that I've owned, or seen, has not had anything that needed to be cut. The only place I ever cut, not including wiring or rod holders, was to install a 6" round hatch right in front of the seat. Any pics? Jason

Thanks guys. I should have mentioned that I don't need the actual work done until April 1st. I'm just planning ahead and trying to figuring out how much this move is going to cost.

I'll most likely be moving my shop, in the next month or so, and will need the correct power for my printing equipment. Anyone local? Jason

Here is a good deal on some racks, if your looking. Thule rack for sale - Kayak Fishing Adventures on Big Water’s Edge Glad you guys had fun. :)

Just curious, what type of cards do you need? Basic or custom stuff? Jason

Hey Nick, This place sounds like where you might want to stay. campland.com If your moterhome-trailer combo are too long, you will get a ticket at Dana Landing. Jason

Good luck Zach! Palomar Limousine & Sedan Service 760-720-9400 Jason

Regarding aluminum tanks... have a look. http://www.kayaksportfishing.com/phpBB2/viewtopic.php?t=1693&highlight=bait+tank http://www.kayaksportfishing.com/phpBB2/viewtopic.php?t=3868&highlight=bait+tank Jason

Contact Alan, he has what you are looking for... http://www.bdoutdoors.com/forums/members/alantani.html

Way to stick it out Zach, your dad looks stoked. I saw more sharks today than kelps. :imdumb:

We'll be out as well.

Check out The Dana on Mission Bay as well. It's right on the water and next to the Dana Landing launch ramp. I've caught plenty of Spotties just throwin' plastics from my dock. Early morning / late afternoon seem most productive.

Steve (Mistress) ended up taking the seasick passenger on board to save him 8+ hours of misery. The guy was very thankful. BTW, Steve towed his boat all the way from San Jose to attend this event.

I had a great time, once again, at this years Fish Fest! Tournament day started a little later for us than some of the others who left very early Saturday morning. My good friend Mark (Locobro) and I cleared the channel right about 6am and plotted a course for the 390. About 16 miles or so...

I agree with you on this, and thought about making some spanish, but we were having too much fun with the crazy Cuda bite. I kept wishin I had my kids with me on this one. I thought about keeping a couple for the smoker, but decided to just C&R them.

C&R'd 50+ LOG Cudas today at LJ with my bud Damon. Lots of fun on the iron. No YT to be had, at least for us. The fish were all over the place. Jason

That was truely entertaining :D , WTG on the Yellows.

I have a couple you can borrow. I'm in Carlsbad.

C'mon Mark, roll up the sleeves and do it yourself! Just imagine the great sense on accomplishment that will follow. :food-smiley-014:

Thanks for that Jesse and Jason. My job comes into play after the design work is done. Jason

Thanks for the heads-up on the materials. Since they don't really "need" to be replaced, I might consider doing that.

I like this part.

Nice! I have my boat slipped right there.

I'm thinking about getting my bolsters recovered and I need a recommendation for someone in North County that does this stuff. Anyone have a referral for me? Jason

Try Newman Replacement Windows, they are in Carlsbad. I have been doing work for them for years. 760-438-8080 Jason

Jake at Shore Line Industries is another option in No. County. He builds T-Tops and such. Wouldn't hurt to give him a call. 760-420-2622

Did you try Woody Wax or Alumaguard?

Jake came back to my shop this morning with his welding equipment, and fixed the problem. He was very professional and did what he said he would do for the price he quoted me ($75). While we were chit chattin after he was done, he told me that he builds custom towers and t-tops at his shop in...

:rofl: OK, I don't want to be losing sleep over this. You guys convinced me to not cheap out on this one. Fortunately, I don't have an outdrive to worry about, but I certainly don't want the thing to collapse from the pounding. I'm glad I posted this, because I just might have left it the...

Thanks for you input Ed, I do appreciate it. The guy doing the work explained something very similar to what you are describing, at least the way I understood it.

Thanks for the PM's and replies with offers and advice guys! :High_Five Yes, that is for sure where the movement is coming from. There is no wear or cracking on the tubing, it's been like that from day 1. I don't think this swim platform was ever intended to support a 30gal bait tank...

I'm looking for a way to beef up my swim platform. I can rock the platform up and down ~1/8". It has been like this since I bought the boat new. It didn't really bother me until I installed a 30gal. bait tank on there a couple of years ago. I would like to fix this while my boat is still on the...

Marina Village is nice and the folks in the office are even nicer, I really enjoyed it while I was there. You might want to consider getting on the list at the Dana Inn Marina as well, if you want to be on Mission Bay. I am paying less than I was at Marina Village by ~$70 for a 25' slip, and get...

I'm getting ready to get new manifolds and risers for my Mercruiser and was referred to these guys http://engines1.com/ . If you happen to find stuff for less, let me know, because I need to get this done soon. The parts I'm looking to get are aftermarket, not OEM. Jason

I'll add a couple......

This might help you get started in the right direction. http://seanote242.tripod.com/depth%20finder.htm Jason

I had the same problem that you are describing with your trailer brakes after a few years. I was told by the shop that worked on my trailer brakes, when you back your rig into your parking spot, chock the wheels and pull forward to release the pressure on the brakes. I'm not saying that is what...

Regarding Defiance.......... Palmer Marine ownes Defiance and Shamrock. He took over the Shamrock line a few years ago from KCS. I believe that the Defiance line is built in Washington and the Shamrocks are built in Florida. Completely different boats. Can't vouch for the Defiance, but I do...

Try Marina Village in Mission Bay. 1-619-224-3125 Jason

I'm pretty sure I saw one at Sundance Marine in Mission Bay, they sell the Shamrock as well. Jason

The thing was jumping like crazy, while it was hauling ass at the same time. When it was first hooked, I could see the line come out of the water when it jumped.

Fishing the porpoise is fun! :) I actually hooked a porpoise on a zuccini broom tail, that was smoking my TLD30II, until I locked down the drag to break it off. I still can't believe that happened :eyepoppin .

Started out from Mission Bay with a very light 1/2 scoop of bait, with my friend Damon. We found a kelp, a few miles west of the 226, that we ended up fishing for about 3 hours. Slow trolling Sardines, we hooked several Dorado, releasing 6 that were pretty small, and keeping 4, with the biggest...

Well, not much to report today, other than, well, NOTHING! Made it out to the 182, headed South from there, and then East back to the slip. Ten hours in some messed up seas. We actually found a couple of nice kelps in that mess, that were DRY. Warmest water was 69.4 and clear. No porpoise, no...

I didn't want to leave fish, to find fish..... lots of life on that paddy. My buddy had a tough time getting that Dodo in gaffing range so, I went for the shot while I had it. Can't get em all the time. We were stoked to come home with fish for the table. I always have a net on board, I'll keep...

My good friend Mike caught his first Dorado today! We fished one Paddy today in clear blue 70 degree water, about 7 miles inside of the 182. We slow trolled Sardines, while chunking, to get bit. Mike lost a good one, right at the boat, when I farmed it for him with a bad gaff shot. The only...

I was out there today in the same area as well, with the same results. Man, how frustrating it was to find all of those killer paddies, in beautiful clean water, WITH NO FISH! The highlight of the day was seeing a Mako get completely airborn right in front of the boat.

Glad you guys had a good time down here Zach, and made it back home safe and sound. Even though the fishing wasn't so great, just hangin out with everyone and having a few cold ones was a lot of fun. I hope you make it back down next years event.

Cool, hope to see you guys OTW tomorrow. I'm outta here! I'm going to try and plug my tank with mini macks this afternoon.

I'll be heading in that general direction from Mission Bay. Staying in US waters.

Thanks Marcus! I can't wait to try it out!

Nice! Looking forward to trying it out.

I have about 10#-15# of Albie that I caught on 6/24, vaccum sealed that day, that I wouldn't mind trying something different with. I could drop it by tonight if you like..... lemme know ASAP cause I'm getting ready to take the kids out for some grub.

Holy shit! Bloody freaking decks for sure. Looks like you guys had a good time.

The Sardines were your standard 5"-6" models......didn't have a single one roll all day. I didn't really look for macks, since I had the deans. I think some of the 'yakers were getting Macks by the reserve bouys. I also didn't see a whole heck of a lot of surface activity at all, no puddling...

I took my good friend and customer Tom out for some fishing at La Jolla this morning. We arrived at around 7:30 or so after getting a 1/2 scoop of pretty good deans. We stopped pretty far South of the point to get rigged up and decided to just drift this area since there wasn't too much sign of...

Heading out tomorrow for a nice relaxing day at La Jolla. Probably fishing solo and catching my own bait in the bay tonight. 16/72 Jason

I just talked to them, and they do this kind of thing all of the time. You will just need to decide on what type of stone/brick you want and go from there. Champagne Recognition 5235-D Avenida Encinas Carlsbad, Ca 92008 760-931-5766 e-mail: [email protected] Ask for Lori

I have a neighbor here at the shop that I've seen engraving (sandblasting) stuff on rocks. They mainly do trophies and stuff like that, but I have seen them engrave on all sorts of wierd stuff. The shop is in Carlsbad between Cannon and Palomar Airport Road and can get the number if you want...

Took my boat to LJ yesterday with my friend Damon on board. We were fishing the bottom for wide open Lingcod, with all but the 12lber released, including several that were probably legals. The funny thing is that we both hooked that fish, not snagged, but hooked in the mouth! It got pretty...

WTG Mike! It looks like your crew is really getting it together. The look on Evans face says it all. Jason

I just wanted to give you guys a report on the performance of my new 'ducer. I replaced my old thru-hull with fairing block with this tilted element 'ducer......... http://www.airmar.com/whatsnewmarine/whatsm_index.html I was having problems with turbulence on the old one when I was at...

Some good eats you got there Danny. Congrats! I need to get me some of that.

I don't have a dog but, I have a couple of kids that know how to break shit and don't listen.

I have a S/H radio on my boat that transmits and receives very well, it was ~$150 or so ( I can't remember what model). The antenna was a Shakespear "Galaxy" series, until I broke it. I now have a Digital brand antenna that transmits and receives just as well as the Galaxy did. You can get the...

OK, I just got off of the phone with Vessel Assist and they will tow my boat to the launch ramp and the best part is they aren't going to charge me anything! They would normally charge 50% of the bill for something like this. I'm stoked! Way to go Vessel Assist! :appl:

I have VA. I guess it wouldn't hurt to ask. I would think that since the boat is sitting safely in the slip, that they wouldn't be inclined to help. If you don't ask, you don't get so, I'll give them a call right now. I discovered another problem while looking around in the bilge........

Thanks man. In the meantime, I'm going to try to get the boat on the trailer, somehow.

I tried to go fishing yesterday and ended up getting towed in from the channel in Mission Bay instead. I think it's the fuel pump. Anyway, I need to get this fixed and my boat is in a slip. So, I need a mobile mechanic or find a way to get my boat on the trailer to get it in the shop. Any...

I should have ran down there to see if there was a pot of gold. LOL

I finally launched it on Sunday and It's still floating! I actually just got back to my shop after going down to check on the boat. No leaks from the 'ducer as far as I can tell. Thanks again for the help!

I was in my garage working on my kids bikes, when my wife comes running in telling me to come outside and check out this killer rainbow. I grabbed my camera and went out back to see this........ Jason

I just don't have any more room in my garage, or on my boat, for more gear. So, I decided to donate it to a good cause. Make it happen guys! Jason

Cool! Thanks Guys! Jason

I had a custom cover made by a local-to-me place and it cost $1,300. The quality and fit was outstanding. After four years of normal use, a couple of the zippers failed (teeth busting off) so I took it back to them for repairs, thinking it would be covered under warranty. They gave me a warranty...

This place has what you want and they will price match......the service is great as well. LED Lighting Here is another source. Interior Led Jason

Are you worried about it corroding from water in the bilge? Would you care to elaborate on your concern with that washer? I think someone on THT used starboard or teak as a spacer to elevate the position of that washer. Do you think that is necessary? I'm not too worried about it but, wouldn't...

I got held up by the rain this past weekend......ended up going to Palomar with the kids instead. I'll try again this weekend.

Same problem here @ 8:40am.

Thanks for all of the info guys. My first project will be getting the old one off. That sounds like it will be my biggest challenge :eyepoppin .

Thanks for the advice Tim! That actually make perfect sense to me and sounds fairly simple as well. Now I just need to pick up the right size hole saw and get the old 'ducer out of there. Hopefully that thing will come off without too much difficulty. Jason

I just bought a new thru-hull 'ducer to replace the existing one. The new one needs a larger diameter hole than the old one. What is the best way to make the hole larger without screwing it up? I have never installed any thru-hulls on my boat and I want to make sure I do it right. Anyone have...

Just a heads-up for NavNet owners. I removed the thing from my boat before I took it in for the annual service and figured I would call Furuno to see if there were any software up-grades available for this unit. The tech put me on hold for a couple of minutes and informed me that my machine had...

Exactly why I put the stock one back on. I don't use mine for bait fishing, just plastics.

A Trinidad 12/14 handle fits.

I replaced the Shakespear "Galaxy" that I snapped in two :nopity: with an 8" Digital antenna (529-VW) and it works excellent. The Galaxy also worked well, until I broke it. Check it out here........ http://digitalantenna.com/vhf500.html Jason

I fish mine with 20# on a Calstar 700L. Sweet set-up! :rockin: Jason

That is who I used last year and they seemed to have their shit together, I'll continue to give them my business. Your comment above, rings true man. I have been to a couple of other places that I felt were gouging me a bit. Once I become skeptical of a business, I never return. Thanks Zach...

It's time to get the annual service done for my Mercruiser inboard and I'm looking for some first-hand advice from you guys to help me decide where I should get this done. I'm in North County. Thanks! Jason

Only the outside needs to be cleaned. I think that the guy who just did mine said he used a pressure washer or something like that. I don't think that it can be scrubbed since it is not a firm surface like fiberglass. The next time you are doing a boat next to a liner, check it out and let me...

Do you clean hull liners as well?

I am currently insured with Boat US and covered down to Punta Banda. Jason

You guys crack me up! Thanks! Jason

I decided to take my boat out on Friday since the conditions have been so nice lately. I was fishing with my friend Damon and my father-in-law Phil. The plan was to target the rockfish at La Jolla. Once we arrived, we started metering around looking for structure holding some fish and finally...

1) Yellow wrapped in kelp. or 2) Sealion after the Yellow wrapped in kelp.

I'm sure getting to pull on a cow would have made your trip a bit sweeter but, at least you were able to get away from the grind of work and enjoy some time off. I'd settle for that wahoo right about now :Bawling_e . Jason

These guys have them in a couple of different sizes. At least they did last time I was in there. Pacific Coast Bait & Tackle 2110 S. Pacific Coast Hwy. Oceanside 760-439-3474 Jason

That's one kick-ass adventure you guys had! :rockin: I want to see the video, but I can't seem to on my Mac. When I click on the link, all I get is a blank page........any ideas? Jason

I bought all of my electronics from these guys .........no sales tax and great customer service. I saved an extra $300.00 on my NavNet when they had some boat show special in January or February, this was back in 2002. The shipping cost was a lot less than the sales tax would have been. I've...

How about $3.50 a gallon for gas at Dana Landing :eek2: . Thats what I paid on Sunday. Jason

Is this the form that Customs requires to be filled out when you arrive? https://forms.customs.gov/customsrf/getformharness.asp?formName=cf-1300-form.xft I'd like to have this filled out before getting to the dock. If this is not the correct one, does anyone have a link for the right one...

Nice chattin with you guys at the dock on Saturday. At least you got a few. Thanks for sharing some of your catch with me. Fresh Albie on the grill tonight! :cheers: Jason

Thanks for replying to my post guys. I'll give you a call next week to set something up. I need to bust my ass at work today so I can have long 5-day weekend on the water :beerbang: . Jason

I need to have some custom cabinets made for my living room. The last guy that I was going to use was just too flaky and could never give me a firm price, even though I was very specific with what I wanted. I'd like to give the job to a BD member, but a referral will do as well. I live in...

The end of August and it was a few years ago. There were plenty of fish caught when we were there, just not WFO. Jason

I've only been to the East Cape once and that's where I stayed. The service was great and the fact that meals were included in the price made it easy on the wallet. My wife and kids had a good time as well. The fishing overall wasn't great when I was there, but still caught some fish and would...

I need to have some custom cabinets made and possibly some crown as well. I just bailed on a guy that was going to do this stuff for me. He was a nice enough guy and seemed to know his shit, but couldn't provide drawings or a FIRM quote..........See Ya! Do you guys do work in Carlsbad? My...

Great job on the Calicos Dan! I just secured my slip in Marina Village yesterday, moving into my house today and getting on the water SOON! I'm looking forward to meeting you down there. :beerbang: Jason

I bought a TN14 handle to put on my 400TE for the same reasons that you guys mentioned. When I turn the drag adjustment it slightly rubs the TN14 handle. Any of you guys have the same problem? It looks like in a couple of the pics you guys posted that the star spokes are bent slightly. Is that...

Nice fish guys! Jason

If you don't have a fuel-flow meter (Flo-Scan/Navman) already, I'd suggest getting one............It will help you find the "sweet" spot. It's amazing what a difference 100-200rpm, up or down, can make. Jason

I have a good friend that is considering a 1/3 partnership in a 29' Phoenix, with twin diesels, that is located in Mission Bay. He is going to have the boat surveyed before he buys into the partnership. Could any of you guys recommend a qualified, reputable surveyor that I can pass along to...

This is the first Dorado landed on my boat last year at the 182. These next two were caught at the 390............we caught six that day! (the last pic was Photoshopped for printing purposes :) ) Jason

Now that I have the slip thing taken care of, I need to figure out what to do with my trailer :confused: . Jason

I got mine from Tom @ Saltwater Specialties (949-548-3474) in Costa Mesa when he built my half-tower. It's made from fiberglass and I'm happy with it. I'm pretty sure he has more than one size available. Jason

I'm in!!! Marina Village.........first week of June. I'm STOKED!!! Thanks for all the help. :beerbang: Jason

I've been looking into the same thing as of yesterday. The phone rings off the hook at Marina Cortez, so I don't know what their rates are yet. Campland on the Bay doesn't have any slips or dry storage.......call on the 1st. So far, Marina Village on Mission Bay said they could probably have...

I'm looking into all of your suggestions, thanks. Where is Southwest? It isn't on the list I got from the Log. Any of you guys use an Armored Hull? I'm thinking of using one of those instead of bottom paint. Jason

I need to find a slip to keep my 219 WAC Shamrock in. I currently have my boat on a trailer in a secure lot where I live, but I'm moving into a new home that won't have anything available for 6-12 months...........or longer! I already have a list of all the marinas in S.D. Bay as well as...