On The Hull Truth the question was asked as to how can "those folks" afford the high dollar boats. Basically many of the replies were those...
Hows about using a PVC cap, drilling the center to fit over the threaded piece of switch then re-installing the threaded nut which will hold the...
I'd be interested in finding one to fish the lakes and the Sacramento Delta.
Bought my Yamaha F150 w/5 yr warranty for $13K shipped last year from Jacobsen Marine, Edmonds, WA.
Change your wheel to this and it won't matter what position it'll be ;) .
This comes in different colors and clear.
I had a 19' Bayrunner Baja that was very stable on the Lakes and on the Blue. Only reason why I sold it was to get out of the weather so bought a...
A kill switch was very reliable back in the days.
Hit me up on "Give me day". :D j/k .
This is a "Ford vs Chevy". As mentioned above check nearest "Authorized" service dealer. I sold a Honda 150 with very little hours and bought a...
I got the pm via email from him two, three days ago about his friend having a Dyne davit. I emailed his friend who replied the davit is "ready"...
Thx, I figured as much.
I received an email via BD conversation from Captainjosh77 saying he has a friend who has Dyne Pot Davit for sale. But when I checked my...
Not the brakes but I recently saw a boat being towed and the skipper of the tow boat kept yelling "Pop the clutch..pop the clutch". :D
Seeking to buy 12V Electric model.
Complete with davit would be a plus.
Best to send me a message if you have one for sale.
Seeking to buy 12V Electric model.
Complete with davit would be a plus.
Best to send me a message if you have one for sale.
Pacific Trailers in Chino
That fitting is nothing more than a place holder for the flush hose to screw on isn't it? There shouldn't be a water line connected to its back...
Ruff crowd :D .
Confusing at 4000K so just to be clear, you're asking $4K right? :confused:
After changing fluids, fuel filter located under the cowling and impeller then run it WOT like you stole it. Best of luck.
Hooping is on my bucket list so I have a thumb out for anyone having an open seat in the Long Beach area. I can go weekends or weekdays. Will...
Looking for a new or used?
Yesterday I was teaching my grandson how to kite but it'd fly up then turn quickly and fall. My wife was on the porch yelling, "You need more...
Then "Poof" you're done. j/k [IMG] .
Being this is your first boat, I'd suggest that before upgrading to a 4 stroke, just familiarize yourself with operating the boat. Reason why is...
When was it last services with new plugs? Although the RPM changed, has the speed also changed? If not then it might be the tach (?). Just...
Huh? If OP is referring to a Yamaha F150hp, it does not.
Rather than replacing the cross member with aluminum, just place 1/16" thick plastic between the stainless and aluminum. Drill a larger size hole...
Is it stainless against aluminum and how were they fastened to the aluminum?
Stainless against aluminum or are the stringer fiberglass?
This would be a great Bay boat and priced right. Best of luck.
Great pics. Best of luck [IMG] .
I converted an I/O to an OB several boats ago. I removed the motor and outdrive and sold them thru craigslist, then listed a want and in...
Hey Coby, check this one out.
Starcarft are good bay and delta boats but they're made with thinner gauge aluminum and riveted. Eventually they'll spring a leak.
I fished on a...
Aren't Starcraft riveted boats?
I like your mod. Will do the same on my crab block [IMG] .
Here's one in North Bay
I fished on buddies Grady White 232 with a single Yamaha 350hp. Great platform but heavy and you can feel it even pulling within his Ford F350...
I don't know anything about Radon boats but to me $35K for a 17' seems outrageously priced. But then again, maybe somebody will buy it.
How about this?
C Dory 22' Angler - $22950 (fairfield / vacaville)...
19' and now regrets selling it. Very versatile, fishing ocean, lakes, and Sac Delta.
Pictures of mine but have since sold it.
These are over 22'...
Pretty heavy that it'll need twins?
I see it's still for sale. Wonder why it still hasn't sold (?).
If it was outfitted with an outboard and basic electronics, what would it be...
What size vehicle do you use to tow?
Make sure it's always fully charged.
...and on THT, there's a PFD post asking "Who wears one" and the majority replied, "Not me" :eek: . Unbelievable.
Is there a Tap's Plastic in your area? That's where I get mine in the Sac area.
Pressure wood is a "no no" because of the impregnated chemicals.
I had a 19' Aluminum boat that I put the name on the transom "My Dinghy Ling". Got a lot of horn toots with thumbs up from cars passing while...
Don't know of any outfit but just wanted to chime in to say that my first boat was a Dorset. Loved it.
I have a Yamaha F150 with 25" shaft that has been professionally rebuilt last March that I've put about 50 hrs on it. $6500
PM me if interested.
Prop bushing is slipping.
Thx for your reply. I thought the boat would be neat for crabbing with my kids and grandkid and have them Rockfish while the pots soaked then...
Glad I'm not a high roller like you guys, lol. I'm just a broke dick dog that doesn't get a property tax for my boat.
May help to put a link so readers could click on it to view close-up.
Title reads $5500
Island Boy...thus named the boat "Reel Kahuna"
What about this one? ;) :p:
As I recall, capacity plate is not required on boat over 20' so this boat may not have one.
Federal Law mandates that all powerboats less than...
I thought it'd be a great platform for sports crabbing. Could load up lots of traps and still have room for a crew.
Anyone know anything about this Wilson?
OP's last log in was Aug '16 so probably boat has been sold. :cool:
Sent you a text.
Borrow a unit from a friend and hook it up in your boat. If it works then it's your radio. If it only gets weather channel like your unit then...
I always plug my onboard charger the night before a fishing trip. But was considering buying one of those portable jump starting pack but doesn't...
Can you receive the NOAA Weather channel? I if not then you'll need a new VHF and/or antenna.
How about this...list your boat here with all the information ie. lenght, beam, motor, t-top, etc.
Potential buyer(s) will ask questions you...
Anyone use a Slingshot to deter fur bags?
Asking for a friend 8-) .
Wheel chock with a length of rope or chain attached and the other end to the bumper. When you drive forward then the chock is dragged behind the...
Nice Locking Seat Swivel bracket for $55 Shipped
Best to send me a PM if interested.
These sell for $90 on Amazon
My truck and boat trailer was parked at Westside Bodega while I was crabbing and when I got back there was a ticket on my windshield for being 2...
If exposed to the sun then it'll get hot.
Those days are far and few between up in Bodega Bay but I hear you that 15-22 seconds ocean are like glass ;) .
Hair dryer isn't hot enough. I used a Harbor Freight heat gun "wanding" over the decal until pliable then I used the flat broad tip end of the...
Hey thanks for this post. I've forwarded it to my buddy who's thinking of having fish bags made. This will certainly help him with his fish box.
Maybe you can find a very small one of these (?).
Snap-On tools truck may carry one.
I've read that "flushing" Salmon blood produces a higher quality and better tasting catch....
Example on how it's on a Scotty Downrigger Mount. Scotty Mount not included.
Armstrong Davit (no motor) in very good condition.
Has a hard mount base that can be bolted on your gunwale or on a Scotty Downrigger mount....
I bought mine from Fl and helped my son buy his from Alabama.
Both great boats.
C-Hawks are get all around boats. I've fished mine out of Bodega, Moss Landing, Santa Cruz, Half Moon Bay and the San Francisco Bay for Salmon,...
An acquaintance used NADA $12K price to buy a one owner boat with 88 hrs that hadn't been used for two years. He serviced the motor, cleaned it...
Now I understand...replace hub but not the brake caliper. Gotcha :cheers:
Due respect but by removing the caliper how does that fix a failed bearing to tow the boat home? [IMG]
Most boat partnership is like a bad marriage...it eventually end up in a divorce.
I carry in my boat 2 complete hubs packed with grease to swap out in case of emergency on the road. Unfortunately when I had to replace my...
After loading my gear right before my Salmon trip some 3 hrs away I decided to squirt grease in each axle and found one noisy bear. By the time I...
By running it all day and the alarm didn't go off then I wouldn't be too concern. But then again, that's not my motor LOL :rolleyes:.
How long did you run it? It'll take several minutes to warm the motor.
Maybe a "Spanner wrench" could be used (?).
Great score....Like a sore penis, hard to beat :D
Anyone have a used 2-1/2 # (40oz) Lead Mold for sale.
Please send me a pm if you do or know of one.
One thing DMV looks for is the trailer identification number..especially from an out of state registration.
So make sure the numbers are visible...
Please splain to this old man. So are you saying this card or any card can be used in different brands just as long as it hasn't been "Not being...
Here you go.
You'll need to add N2K backbone to connect to your Chartploter and that will display the GFS-10 fuel sensor.
Has this been used and if so what brand chartplotter?
I was told that but can't confirm that once a card has been used, say in a Lowrance then...
On my 19' Bay Runner Baja I used Douglas Fir and screwed on Starboard strips. This makes it easy to slide off and on but don't unhook the boat...
Not hard but you'll need the wrench to back off the seal gland cover.
Due respect, she has great "BumBum" [IMG] .
BTW if you're ever up Norcal, you're welcome to fish with this old man [IMG]
Avatar from the internet.
How fitting...Reported by Karma Allen
Man finds suspected burglar dead in his home, trapped under 900-pound safe
[IMG] Will do.
If anyone has a used, not needing any repairs aluminum tandem trailer for a 24' boat plz pm me.
Thanks for the offer but a fellow member has already alerted me that this trailer has been in an accident thus the reason why it still hasn't...
Has anyone checked out this aluminum trailer located at Marina Del Rey?
Priced seems right but still for sale. I arranged to drive down from Sac...
Prefect example of using a "Buddy System" where each pair up and keep an eye to each other, especially in open water on a PWC. Condolences to his...
Pictures of the Curtains.
I'm in Norcal and have switched from Fiberglass to Tin and never looked back. I'm on my third tin, started off with a center console that...
I replied to your PM
Give me a call or text when you're ready.
Off my 2006 Proline 21' Walkaround Hardtop.
Blue fabric, front visor, rear and both side curtains.
Choose your transporter wisely, otherwise.....
Newton's Third Law
For every action, there is an equal and opposite reaction. The statement means...
Grats on your sale.
I was on the fence on buying it.
I got an old hand crank like that one. :p
Gives me an idea to bring it along next time to grind chum..nah, too much work :D .
Best of luck.
I had to go thru almost the same, had the out of state title and plate but no visible numbers. DMV wanted CHP inspection who validated that...
Sold it for $1200
I agree 100% and that's why I've always recommended having a boat transported on a commercial flatbed trailer.
Here's a post from another forum...
Good for you. :cheers:
I use a 1-1/2" solid round brass rod placed over a loosen nut then give it a good rap with a hammer but not too hard.
No more than $3500 tops.
You're correct but new user need to know which way the motor's shift goes...either push or pull otherwise it's like pulling one's hair out...
With some, it's either a "push" or "pull" control.
On that Striper, I'd remove it while towing. Lots of Dinero to replace.
As for my Duckworth, I tow with the Bimini on but it's entirely...
The few times I've bought thru paypal and the seller asked for FF, I tell them that I'll include the paypal fee with the payment, that way it's...
Partnership is like a marriage and when the shit hits the fan, attorneys are the only one that comes on top :o .
Best of luck find your mate.
Who ever you use, ensure they are insured and that you too insure the boat at an agreed value not replacement value.
Most independent transporter...
Check tightness on the oil filter.
If not that then it could be the power head gasket, crankshaft seal, and/or o'rings.
Wish this was for sale a couple of weeks ago because I bought one with a Raymarine connector plug.
Thought I write how I made it work on my...
Yes it will. It's identical and uses the same installation manual as the Lowrance and Simrad.
Sorry for delay in posting these pictures but been one storm after another here so I didn't get out.
Radar was bought from West Marine San...
As written above, clean inside and out then air pressure test before reinstalling.
As an after thought, post measurements here and maybe someone...
Jot down the dollar figures.
$40K/2 Yamaha 250 outboard
Then there's rigging, wiring, etc. plus your time.
Best to buy new as...
Here's a link that sells the mold up to 20#
Here's the associated parts.
The radar and cable are at my storage unit so will pick it up tomorrow and take picture.
Yes I do. I'll post the pictures tomorrow.
Thinking maybe a long shot that a BD member down south lost it (?) ;):D.
Merry Xmas to all.
I googled this for you.
Wow, I would never have guessed that you'd get 360° screen view with the tower over head. Good to know. Thx
I take my Yamaha to a certified 5 star mechanic and have had very good service.
Here's one I googled that services your area....
NO LONGER LOOKING
Bought one locally at $9800.
Looking to buy a low mileage Tahoe or Yukon with 5.3L or 6.2L and automatic.
Wish this was available a couple of months ago before I bought my '18 Yamaha F150 that now has 21 hrs. :cool:
Sorry can't use it.
Yes, it come with it and all associate parts...everything.
B&G is basically the same radar as Simrad and Lowrance with a different decal....
Mine on '96 Duckworth Navigator.
Back in March '18
We just celebrated our 53rd anniversary last week. We met in junior high and have been a couple ever since.
Advise? None...gotta take it day by...
The wife's best friend.
Stainless Button, Socket Head Cap Screw.
Unless they have the correct size allen wrench these makes it a little more difficult for thieves to...
When I lived in LaMesa I drained 5 yr old gas in a couple of 5 gal container and left them on the side of the garage and the next morning both...
I thought I needed a Speedi Seal kit https://thewikihow.com/video_p1aM0Kb9qc0 on the I leak I had. But an authorized Yamaha dealer checked and...
You need to hit 6K rpm at WOT. I'm running an F150 Yamaha with a 15" pitch SS prop on my 23' Duckworth. On my 19' Bayrunner Baja with an F115...
Great price. Wish I was 100# heavier so it'd fit me...hehe.
Not gonna happen unless you replace the entire deck which problem cost in the neighborhood of $3K or more (?).
You probably mean"1106". That's a good price though.
You can't go wrong with a Bayrunner Baja. My 19' did well in Bodega Bay for Salmon, Rockfishing and crabbing. Like mention and as you well...
Hooping is on my bucket list so want to trade trips.
I have a 23.5' Duckworth that's moored at Spud Point Marina and is set-up for crabbing out...
Spot on. A one day license with a card will be a lot cheaper than a ticket.
Be sure you get a "High Thrust" kicker.
Remember that each inch of pitch is worth about 200 rpm. Lowering the pitch will increase rpm and vice versa. For example, going from a 23 pitch...
As long as it clears, then you're good to go. As for using a Honda prop on your Yamaha, if the splines matches and the prop fits snug with no...
That's not considered a portable tank if you strap it to your deck.. So it can be filled while mounted in your boat. That's what I placed in my...
The grease bearing seals for boat's are "double lip" seals. If you replaced them with regular single lip seals then that maybe the cause of the...
I'd buy an entirely new pair of disc brake kit. You can use your existing actuator if in good shape.
Kodiak or Titans are good brands to go with.
I'll take them. PM sent.
Costco has a Cat CJ1000-dcp for $90 that has 120psi compressor, 6.2 amp usb and 1000 A jump starter. Was going to buy one but the reviews weren't...
Wife of 53 yrs.
Only one repaired ??? I felt more. At any event, I wish you had disclosed that the deck had soft spots prior to me driving 6 hrs each way last...
(You're ) Lucky, John :D
Dale, any issues a buyer needs to know on this boat?
Cheap is not good...Good is not cheap..
Nuff Said 8-) .
I was told the shops charges about $100 to check the codes. One is better off buying a reader. That's what I did but haven't used it yet. I'm in...
I bought an Aluminum flat bar 1/8" thick x 2" wide x 48" long from Home Depot.
I bent one end 90 degrees about 4" high then marked off and scored...
That's a gnarly driveway :oops: :p: .
Have a 1/4" thick skid plate welded.
Rent a concrete saw and cut the center area where your trailer drags. Then dig a trench a little deeper to clear the trailer and pour concrete or...
In view of DFG no longer has the species/minimum length printed, one could print each species and minimum sizes then laminate the paper and keep...
Yup, looks like an exhaust part.
Probably help to include the seller's link to his ad.
Hey Shad, nice talking to you and thanks for the prices you quoted.
Those prices are great and members that's looking to repower should contact you.
Got a name and number to call for availability?
I believe you but from where? That's about $1500 less than dealers cost.
I ended up buying from above Ca including shipping that beat any local...
As Jimmie Cricket sang, "When you wish upon a Star..." :D .
Best time to list it is in mid April after income tax day. Potential buyers know how much they'll get back and it's right at the start of the...
Damn good price.
Nope...it'll hang on a 14' Livingston LOL .
Hey Broken Rod, any reason why you passed on this boat? Seller's in Texas and his 1st post to sell here in Calif. makes me curious :rolleyes: ....
I'd have the guy who ripped it, replace the bag it. J/K (sort of) :rolleyes: .
Now that's the shits :mad: . A man is only good as his word and again, "that's the shits"
I too am looking for a 14 gal tank but finding one up...
This guy has this ad in Craigslist all over the country. IMO, got to question why one would post his first classified ad from Flint...SCAM ALERT!!!
Appears you've already answered your own question :rolleyes: :D.
I currently don't have a washdown pump but will install one. Dry blood is hard...
Similar between a 2 stroke and 4 stroke motor. Both will work but IMO one is better than the other.
I'd suggest spending the extra dollars and...
I bought mine from them about 8 month ago and very pleased with the unit and the company. I thought it also came with a foot control and emailed...
I bought mine from here: https://motorguide.factoryoutletstore.com
I considered buying the fresh water model and was talked out of it in various forum. So glad I bought the Xi5 saltwater series. That spot anchor...
I have a Garmin 840xs that's near brand new that I replaced with a touch screen.
Comes complete with transducer. $500 plus shipping.
If buying a new bait tank, be sure it comes with fasteners. I just bought a 26 gl Moeller and now have to run back into town some 1/2 hr drive...
I only plug in my onboard charger the night before I go fishing.
I agree but almost every new owner and even the sellers list the total cost of the boat which includes motor, trailer and electronics to DMV when...
You can buy the boat then drop the bait tank here in Sacramento area. :p:
So when does the years kick in 8-) ?
They probably use a scanner like those that the LEO uses to scan PTI trailers at the launch ramp lot. Mine expired Dec '17 and got a ticket in...
I think there's a minimum dollar value on a boat before being taxed.
Last year I met a guy who bought a new North River hull only, registered...
You beat me to it. I too never, ever shut my motor off while on the deep blue.
I just bought a pair of Scotty downriggers from one member and a Yamaha binnacle from another member. Both transaction went smoothly and thanks...
I think I replied to this before. Yes they're great boats.
If you're referring to this C-Hawk brand , then yes they're great riding boats.
Be sure to have the wheel bearings checked and repacked along with the tires and spare without any side wall cracking ;) .
Members not on face book will not see it :o .
Quite true if that's the only truck's use.
I too have the 60" Saltwater that worked great on my 19' Alumaweld in the lake, river and ocean. I just removed it and mounted it on my new to me...
I had one years ago that worked fine.
Greg, hopefully the the stars will fall right to find a "Pony Express" ;) .
BTW I'll kick in some gas money for anyone willing to help.
I'd take them...If anybody is headed up north as far as Fresno that could Pony Express them, I'd drive down from Sac area to meet them.
My son has a 17' Marlin with trailer that he wants to sell. Merc I/O running.
If you need to re-power now then buy that Honda with controls. Later if you feel it's under powered, look for a bigger Honda HP and sell the...
Wow, that's a great price. I currently have two Scotties but would buy and mount this on the stern of my boat for guest. Unfortunately being in...
NR and comparable type aluminum boats are SOLID.
I just bought a Destroyer Steering wheel from Amazon at $39 shipped.
Amarine-made13-1/2 Inch 5-spoke Destroyer Style Stainless Boat Steering Wheel
One of those on the back of my Alumaweld would sink it. LOL
Thrust Washer...I was about to suggest the very same think.
Hey Brah, rough and comfortable doesn't mix well like oil and water don't mix well, LOL.
Personally I don't go out on the ocean when wind is over...
Pray tell. What caused them to roll over..design flaw or operator error? Can you link any write up on them?
I thought they were pretty well made.
..and that's because you are a "Doer" and that's GREAT!
Dreamers talk, doers do
Ask a dreamer about their dreams and they will paint the most...
All I can say is "WOW"!!
Keep the pics coming :appl: .
The first thing they asked me, if any fire arms on board. Then boat registration.
If the seller is the registered owner then a paperless title filled out by him will work for both boat and trailer.
If the seller isn't the...
That'll be a great fishing platform. Grats on a great find.
"Rice is Rice" :D...
Local buyer offer 30% less than what I advertised "FIRM" on the price.
Buyer from Idaho drove two days to buy my trailerable house boat at full...
Dana Teicheira Maritime Surveyors Inc 707 769-9171.
He surveyed my boat located at my home east of Lodi.
HH, your link isn't working but is this the box anchor you're referring to?
If it works on a Lowrance HDS 9 then I'll take it.
I've had a few do that to me then I changed axles that cured the problem.
Check your existing prop's pitch. On my previous owned 19' Bayrunner Baja I dropped down from a 17" to a 15" pitch to attain 6K [email protected] WOT.
Their skin is thin so thoroughly check for pin holes, especially at the transom.
Other than that they're good boats.
Several years ago I towed my CC up to the River Gorge to Sturgeon fish. It was my Sacramento Delta fishing boat and only boat.
Everybody on the...
I also think they're 5/16" diameter but length is 1-3/4"
One guy at Garmin told me the same about using the box adapter then tried but didn't work. Called again and was told it wouldn't work.
What ever you do, don't borrow from a guy named Guido ...I heard his interest rates are painfully high:p: .
Although not a Fishmaster top, here's my former Bayrunner Baja with an ebay T-top.
I've installed two Fishmaster T-tops on different center consoles. They're made well and was very satisfied with them. Not only shade from the...
Got one that I used twice, with carrying case. Paid nearly $600 sell for $395. PM if interested.
To paraphrase "You don't leave the flock to look for one missing...".
Kevin did right by returning to the store.
Picture of the wife? J/K :D
This can be made with a plastic bottle and a 5 gallon bucket that you already have around your house. I live in the country and have trapped a...
Damn this is a tough crowd :p: .
Should I use 4200 or 5200??
Several years a go knew a guy that was underway and another boat tailgating him full bore, yes tailgating!
Guy had to slow down because of a...
To make it easier, take pics of the reel and each stage of removal. This will help reassembling.
Wonder if my 1500 Silverado could pull that? o_O
Did you lily call? :D
Almost like, "Stop me if you've heard this joke before" ;) .
When I wrote "...aluminum gets hot in the summer months.." meaning, the aluminum metal gets hot to the touch on my boat.
My deck has vinyl...
I currently crew on a buddy's 22' Raider Pilothouse boat with twin 150 Honda's. It rides great and handles the 7'-8' ocean swells great.
Tap's Plastic also sells them.
Is the ducer transom mount and is it 600w or 1K w?
With ethonol gas, the injectors may need cleaning too [IMG] (?) .
I'd go with the North River...more versatile in any body of water plus a bigger buyer audiance when you're ready to sell ;) .
Is your trim tabs hydraulic or electric? That makes a difference.
There's a DMV number you can call instead of going to a DMV office.
Suggest you also post on the Fishsniffer.com
Rectangular shape 22" x 31"
[IMG] [IMG] [IMG] [IMG] [IMG]
I've got an factory leaning post with bait tank off my 19' Bayrunner Baja that I sold. I can post pics if you want.
If your motor is under warrany, then remember to save your receipts. They may come in handy if warranty work has to be done.
I think the early to mid 2000 Yamaha F225 and F250 were the only ones that has corrosion issues. Haven't heard any on Hondas.
Although I've posted the "before" picture, thought I'd marriage both with the "after" picture.
Before, caught last Saturday
After, in the...
Sorry DD, I didn't take any pics other than the ones above. I do, however, have the two hook-ups on my old Gopro but the quality...
Trolling Silverton with 6oz sinkers, bumping bottom 75'-100' back at 1.3-1.5mph speed over water, not GPS speed.
A friend and I fished the 5th Annual River Rotter Salmon Derby yesterday in the Sacramento Delta. We each only caught one but mine took 1st...
Yup, go Yamaha...it's like a sore Penis, hard to beat :D.
Wow, I just ordered one from Amazon.
In your case, I'd have seller go to DMV and get a hard copy title.
WTB Lowrance Blue Connector Paddle Wheel Speed Sensor ST-TBL 99-97 or SP-BL 99-97
Alot should be available after Irma clean-up...just saying.
Now that's interesting that there's no transfer fee but a dealer may charge for the inspection [IMG] .
At any event, a buyer should "do what...
Nothing to transfer because the warranty is on the motor not the boat or owner. If in doubt, give the serial number to any authorize Yamaha...
Two or three years and the warranty covers the motor not the owner and the serial numbers is registered with Yamaha so warranty work will...
There's the problem...The actual selling price vs claimed paid price to DMV is a vast difference ;) .
NO LONGER NEEDED.
May I suggest that you also get insurance, if something does happen you deal directly with your insurance and not the transporters insurance.
If I could find someone headed up towards NorCal to transport, I'd buy it for my houseboat to use as bow thruster. Best of luck on the sale.
Build date 12/05 so it's an '06 with 117 hrs no gauges but do have 703 control with 10 pin cable. Would rather trade than sell.
NO LONGER NEEDED.... TRADE my Yamaha 115hp 4-stroke 25” shaft with 117 hrs for a Yamaha 60hp 4-stroke 20” shaft with low hours plus price value...
Boat with motor SOLD pending payment balance
Replacement motor Yamaha F150 with 233 hrs
Before my fishing partner passed, we'd Striper troll once every week for at least 8 hrs so the motor probably has over 400 each year for over 6...
Probably cheaper to sell your tiller and buy a steering motor.
I'm sure you already know the additional cost would also include the helm steering...
I met a guy who bought a brand new North River type boat without motor or any rigging. He paid taxes based on the boat's purchased price.Then he...
Huh...? [IMG] .
Sold this a while back but it sure was a great boat fishing the Sierra Lakes, SF Bay, and out the Golden Gate.
o_O No thanks.
And this is why I'm separating the motor and boat :rolleyes:.
I listeded it locally but got nothing but a lot of lowballers.
Thought it best to separate them.
You wanna buy it for $29K ;) ?
No I did not buy it just for the motor. Here's the motor that's listed for sale....
SOLD pending final payment balance.
Proline 21' Walkaround Hardtop Yamaha F150 motor.
Not to hi-jack this thread but I maybe selling my Yamaha F150 hp 25" shaft built 6/16 installed 1/17. I just put 2 hrs and has 3 yrs extended...
I tow a 28' Party Hut Pontoon Boat with my '07 Silverado 1500 with a 5.3L motor
Those noodles with keep that boat afloat without any problem. That being said, if it is called into service then you do have a...
Hey, I'm up in Sac area and am interested to joining your caravan.
PM me the particulars when you get the ducks in a row...plz.
40# White Sea Bass while fishing for Lings at Bodega Bay
Not much activity on this forum but I'm confident that you'll get an answer.
My Yamaha F115 had the same problem and was the Rectifier Regulator. As mentioned, easy R&R.
Sounds like you've got it sealed good.
Wish I were closer or maybe someone is headed up Sacramento area that has an empty trunk :rolleyes:
Now that's a deal.
Last boat I had shipped from Alabama costed $4500
Also helps to unplug the trailer connector from the truck.
Great looking boat and better yet, great price. Best of luck.
You'll need a 6 pin connector for Garmin. This can not be plugged in a Garmin.
Near new. $170 shipped.
For those with a Striper 1851, how does it handle out in the ocean, say 4'-6' swells at 8-10 sec interval?
My grandson just bought one and he's...
Wish they made one for a Striper 1851 WA.
Hey Ray, you still looking?
I don't think that particular 2 stroke model/year has an ecm that can be read.
You'll be fine. The naysayers have never experienced the ride.
I moved my console 34" forward along with the two batteries and 25 gal fuel tank....
Damn good looking boat. Who ever buys it will certainly score!
How long did it take for them to do the job, start to finish?
Not mentioning the exact cost but what ballpark figure?
Pics look fantastic.
112 hr correct?
Want to trade. Like to try Hoop-Netting for Lobster
My Doctor friend and I, a retired engineer would like to hoop for Lobsters on your boat and...
I'll try to help..;)
Shit, I just repowered with '16 Yamaha F150, otherwise would have been interested.
I've got one off a 17' Four Winds that's in great condition but I'm Sacramento so might be a little far for you to drive up. It's a single axle...
For what motor?
They will just as long as you match the colored wires to each mfg.
I.E. Ignition Wire Color for Merc is Purple. Yamaha is Yellow.
Was used on a F115 2004.
In very good condition.
$125 to your door.
Come check it out! Asking $8500 obo
858 204-four eight one three. Mark
You don't have to worry about Bananas if you buy these [IMG] .
Want to buy a used walk through aluminum boat with trailer and a 4 stroke motor but will consider 2 stroke in good condition to fish lakes. Priced...
My bad. This is what he told me.
Sorry for mis-information [IMG] .
Regarding Livingston, if anyone has a lead on a 16'-er, plz let me know.
That's calling his Bluff [IMG] .
Buy something like this, a clamp on tranducer mount. Available at West Marine, Bass Pro, Amazon, etc.
Live Bait Well off 2000 Bayrunner Baja 19’.
In very good condition
Located at Sacramento area.
I recently asked about an F150 that's been sitting in a Marine shop boxed in a crate for over a year and one main answer I got was to do a leak...
For used a used boat and trailer, DMV fees usually run about 10% of purchase price.
Luxury/Property tax is the same...about 10% annually.
How wide is it?
Self bailing deck?
Kahuna: A popular term for the person in command, typically expressed as “big Kahuna”.
Tunajuan, if you find one with 115 hrs in near new condition listed for sale for the average retail price, I'll chip in and help you buy it.
So did you get a woodie? J/K :D .
Upgrading to a 200 hp.
Selling a 2005 Honda 150 hp 4 stroke with 25” shaft that has 115 hrs.
Still on the...
Wanting to buy a West Coast Lake Maps for a Lowrance HDS 7 Gen1.
Wonder if this mat wiill mar the deck like some of the mats?
This will be available soon.
Regardless where the delivery takes place, CA still tax you both for boat and trailer and as mentioned annually Luxury tax
Rather than using wire, guys up PNW uses 2-4 electrical zip ties attached to the top end of the anchor and a shackle bolted to the bottom....
If you know what your WOT rpm, this should help. But I'd guess a 19" pitch.
Wide Open Throttle (WOT) rpm Range — When selecting a boat prop, the...
Good to read all is well with the motor.
I'd still would ask for the original fuel pump and all the parts they replaced. Bet a dollar to a donut...
Sorry, should have been clearer. I was looking for an F200 like you but just couldn't find a used one but fortunately I found the F150.
I too was looking but didn't have much luck. Was told that the early F200 is a F150 punch out a little. The newer F200 cost too much to...
Looking to buy a West Coast navionics card for a Lowrance HDS unit.
My thoughts exactly.
But you were closer, I'd let you borrow mine that's just sitting empty in the barn ;) .
I think he's advertising his boat for sale for $6700 FIRM and he also has the jet ski up for sale. I guess he'll take a potential buyer out for a...
I'll take the "Head" and "Galley" signs. PM sent.
Price reduced $125 plus shipping
At least you're up front about it :hali_ruahahaha: .
Others would write, " It didn't work out for me" :eyepoppin .
Best of luck.
Here's a list of Yamaha's 5 star certified mechanic in your area....
Good Karma headed your way.
Great that you were able to save those guys.
How's about a 2005 Honda 150 4 stroke 25" shaft with 105 original hours?
PM me if interested.
This is currently on the boat I just bought.
Like new, in very good condition.
Best to PM me if you want it.
Sorry for Sheety pic [IMG] .
NO LONGER LOOKING. FOUND ONE AND BOUGHT FROM BD member BLUFLAMEd67.
Thanks to all who sent me PM's with what they had available for...
The one I had was perfect but had an I/O that swung side to side when slow trolling. I'd lik to find an identical boat but with an Outboard.
Brain, beautiful Parker Pilothouse but looking for a Walk Around.
Best of luck.
Yes. We've exchanged emails a couple of weeks ago.
NO LONGER LOOKING. FOUND ONE.
I’m looking to buy a nice clean, turnkey late ‘90s or early ’00, 21’-23’ with 8-1/2' Beam Walk Around Hardtop with...
Shit, I can't see a your truck :p: .
J/K :D .
OP hadn't logged on since posting this ad. He must be homeless but may still have his boat..j/k LOL .
Sorry for late reply but been busy.
Yes the boat is still available and I'm located in the Sacramento/Stockton area.
Best to send PM for faster...
Where's the motor located at?
· VERY LOW HOURS ON VOLVO PENTA 5.0GXI
· SEATS 8
· WASHDOWN SYSTEM
· FENDERS & LINES
· WINDSHIELD WIPER
Looking for in good condition a Lowrance LMF200 gauge.
Want to buy a used but in very good condition Lowrance LMF-200 Multi Function Gauge
On my previous CC boat, I bought a 3/16” thk sheet from Tap's Plastic and also bought an 8’ long 3/4" x 1/8" thk aluminum flat bar. Use the...
Sounds like you've got too many irons in the fire.
But that's all good irons ;) .
Please do keep us informed with lots of pics. :-)
Does this need a black box for the transducer?
You should be able to use the Garmin P77 shoot thru with that Lowrance Elite7.
Grats Todd. That's the best way to roll!
Main motor is a Yamaha 150 4 stroke.
Boat is being sold with or without the motor.
Several inquires but boat is still available.
So what exactly do you have? Single or tandem trailer?
Operative words, "...and equipped with air brakes"...do you have air brakes? If not then...
I think he's asking $4000 for everything. Hell of a good price.
Thanks, that was my problem and am good to go now!
Forgot to include that the Yamaha's lower unit is new.
Thanks Ollie. She's been a great fishing, crabbing and family cruising boat.
No it's not by Chris Craft. It's by C-Hawk http://chawkboats.net/
Great compressions on all cylinders.
So where's the "Mark All Forums Read" button?
If I didn't just buy and mount the Lenco trim tabs on my 19', I'd be interested in buying yours. Best of luck.
I just built a 80 sq ft hardtop for my Pontoon but bought vinyl deck covering but after reading this, I think I'll use the vinyl on something else...
Randy, thanks for your advice. I'll pass info to my buddy.
Fishmaster T-top is currently offering free spreader lights with their t-top.
I bought one from them on a previouse owned boat and was easy to...
I've heard those injectors tend to fail so mixing oil in the gas would be the way to go.
Here you go.
Wow, 109 yrs old. May she RIP.
I've been wanting to fabricate my own but my plate is so full that I just now ordered the front hitch from Amazon. Prime member so they guaranty...
I read your post but didn't want to hi-jack it so I started this one. Good info on your thread....Also got good advise from Shad particularly...
Good to know, thanks. I'll pass info to him.
My buddy found a replacement for his twin Mercury 150hp 2 stroke with a single Yamaha F350.
Quesion is, what to do about the 8 existing bolts...
NO LONGER LOOKING.
Buddy is looking to repower to Twin Yamaha
Wide Open Throttle (WOT) rpm Range — When selecting a boat prop, the goal is to choose one that allows the engine to reach its optimal WOT. This...
Maybe he can borrow or rent your tree...j/k brother :D .
Hoochie Green, a lady of the night moved to a small town recently and was the talk of the town among the men, so much so that the church Pastor...
You did right. I just took delivery on a set of Lenco Tabs, instructions reads, "5200".
It was posted on another fishing forum and thought it'd be fitting to contribute to the Bruce bashings LOL .
So to soften them up, this is what he did before the surgery..:fighting0061:...
No Longer for sale.
No longer for sale 8-)
The question is, what parts would be "salvageable and how much would you get?"
I've bought a boat or two just for the motor, binnacle and main...
No Longer for Sale
You're welcome. Nice to help.
Wouldn't it be best for a Yamaha mechanic test the motors rather than a surveyor?
Wow, really need for a brother to have a "look/see" if the motor runs and is cosmetically clean. A case of Corona for your trouble :cheers: .
Anyone in the Corona area that can check out a Johnson 225 2 stroke outboard motor for me? If so, please send me a PM for particular. I'm in the...
Typo...the year is 2000 not 1990.
Lost my fishing buddy and am thinking of selling my 2000 19’ Bayrunner Baja with Yamaha F115, about 500 hrs and galvanized trailer.
PM me if...
Here's one in Sacramento area on the "Fishsniffer.com" classified.
Disclaimer: I do not know the seller nor have any knowledge of the motor....
I had the same problem with my Yamaha F115. Forgot the fix but I brought it to a Yamaha 5 star gold cerified mechanic who knew exactly what to...
PM answered. The one I have is the 704 top mount binnacle with trim switch.
I have one with key switch and control cables. PM me if interested
IMO, swapping a 2 stroke to a 4 stroke will increase the boat value. Buy low and sell high ;) .
Shaft length? Year? Price, Hours, Pics?
To attain the full effect on your sonar you need to use the 83/200+455/800 KHz otherwise I think you can use any Lowrance transducer with a Blue...
A little pricey but a pair of these may
solve your problem.
These are much cheaper at Harbor Freight for four but require you to jack...
Extra Long Shaft...25"?
No I won't, my question was towards members thinking they can sit in their boat parked in their driveway to familiar themselves with the unit.
Would the transducer be affected ("burn-up") if you're running your unit in the driveway for a long period of time while familarizing with the unit?
I'm also looking for a Lowrance Chirp sonar/GPS unit but see that they come with or without transducers.
What tranducer are each of you using?
Buy one of these gage Angle Finder at Harbor Freight for $5.
I bought this a couple of months ago for my Pontoon repower but didn’t realize until yesterday that I ordered the wrong Yamaha Multi-Fuction tach...
Too far a drive for Smitty (lol) so unit is still available.
Yes I do still have it.
Sent Smitty an email and if doesn't buy it, you're next.
This unit is in very good condition.
Reason for selling to...
I've got this Hummingbird Paranha 160 with power cord and mounting bracket but no transducer for $40+shipping.
Here's a pic when I powered it up...
I have a Hummingbird Navionics Gold/Gold 1XG
For all USA & Northern Bahamas SD card. That gives access to all the essential information...
Sorry for posting pics late but was out fishing yesterday.
Yes, it has GPS.
Comes with Cover, transducer and wiring. Will post pics tomorrow.
Very little use.
$290 plus shipping.
I spoke to an elderly gentleman that lives in Sonora who owns one that he bought new. He said that the his transom has to be rebuilt due to dry...
I just looked at the CL post and the boat looks like it's well kept; however, I was told that those 21'-er has/had "dry rot "transom problem....
PM sent for the VHF.
GPS puck comes with it?
..and the asking price is...? (Drum roll...) :cheers:
NO LONGER NEEDED
Give me a break...:cool:
NO LONGER NEEDED
Want to buy a Yamaha top mount binnacle.
or I will trade straight across with my side mount binnacle
But it's okay to loan her to an aquaintance? j/k :D
Man, that's the "shits" .
LOL, I just got back from driving down to San Diego buying a Yamaha F115, but had to buy the entire boat.
Best of luck.
PM sent on the Lowrance.
Would you be interested in a 22' C-Hawk Pilot house w/o power? Send me a pm if you or anyone else want more info.
My T-top's main purpose was for shade. Originally I ordered a Stryker T-top but it was on back order so I cancelled the order and I bought one...
I'm looking to buy a 17' ski boat but it'll need a tow. The boat and trailer are in San Diego and in excellent towing condition and am looking...
I don't know how much you want to spend but if you're looking for a functional T-top at an affordable price, here's the one I bought off ebay...
Isn't this the same boat you already have advertised? http://www.bdoutdoors.com/forums/threads/baja-bayrunner-19-5-ft-11-000-obo.591664/
No Longer Needed
That's exactly what I did when I mounted the Yamaha F115 on my Bayrunner. I used a 1/4" thick channel aluminum.
I'd like to see the boat. PM sent
It's not so much the availability, it's more the condition and price. Your boat is an exception and certainly priced right.
If I didn't just...
If the seal is leaking, then best to buy a repair kit and change it. Keep filling it will only get you in trouble later down the road.
Latest change was to move the two deep cycle batteries up under the console then removed the 12 gal tank from the stern and replaced it with a 28...
Located in Sacramento area
· 22’ Long
· 454 cu in motor w/95K miles
· Auto Transmission
On my 19' Bayrunner Baja with Yamaha F115, I switched from a 21" @ 5600rpm to a 19" pitch alum 3 blade prop but I haven't had a chance to test it...
Seems that you're doing it right! Post pics when done.
When I pulled up my deck to run new wires I noticed that each section has angles cut on the edges. Did you do the same or cut it w/o angles?
Look for one like off a Bayrunner Baja that's open in the bottom...but it's an aluminum not fiberglass. Mine is not for sale, just reference...
Here's a typical switch wiring diagram. [IMG]
Thanks but that's basically the set up I have now but want just one tank.
I agree with you all on the larger tank.
Now that I’ve re-powered to a Yamaha F115 on my Bayrunner Baja, I’m looking to upgrade my 12-gallon gas tank. On my previous Pilothouse boat with...
Regardless of year, that's a lot of dough. But seriously, one only lives once in life so go for it, otherwise you'll be saying, " I should have,...
I couldn't find a 90 so went with what I had, the F115. The 21" pitch prop was 5600 rpm at WOT so I ordered a 19" pitch to attain the 6K rpm. Am...
Just an update as to the finished mods.
The Yamaha F115.
Note the Scotty downriggers that I just used...
Well I took the Bayrunner Baja out for a shake down cruise out to the San Joaquin river with my pup this morning and am very satisfied on how she...
TRADE ONLY!! Will not sell
2002-model F115 hp 4 stroke Yamaha 20” shaft with 503 hrs, will trade for Yamaha F70 4 stroke with comparable hours...
A peddle boat need not be registered but by putting on any "motor" electric or gas, then it has to be registered needing a CF number affixed on...
When I lived in VA I bought a Townhouse w/HOA. The front door was "Baby Poop Yellow" so I painted it white. Needless to say I received a letter...
It maybe a little far for you but Wright's Marine Motor in Lodi is a Yamaha certified 5 star mechanic.
Rich is one of the best in his field and is...
What every you do, don't use a plastic thru hull fitting.
For months I searched for a Yamaha 90 hp 4 stroke, the max rating hp for my newly acquired 19' Bayrunner Baja but none available then...
Yawn, just woke up and read this...a day late and a dollar short, damn.
How wide is it? Is the current trailer in good condition that if bought, can tow it back to northern CA?
On my two previous pickups I mounted a canopy shell over the bed, had DMV inspected and registered them as a non commercial. Then this last one a...
Well as I wrote, I’ve taken the Bayrunner Baja out in the Sacramento Delta trolling for Stripers and have taken her out in the ocean at Bodega Bay...
Will sell outright $360 shipped.
Best to PM me if interested.
It takes a 10 pin ducer.
WTB used Furuno transducer 10 pin transom mount with bracket.
I've got an '89 Evinrude 50 2 stroke on Pontoon boat used in freshwater only. Complete with main harness and top control box $1200. I'm...
I'm in Lake Camanche just south of Sac.
I thought West Marine stopped price matching a couple of years ago :confused: .
Gregor bought them out.
Not locked up. It's in the bottom in Bodega Bay.
My Hero2 took a dump so I bought brand new Gopro Hero4 Silver, still in the box never opened, for my family crabbing trip last week but I didn’t...
Conducted the Bayrunner Baja’s maiden ocean voyage on Dec 27, 14 with my friend Doneli at Bodega Bay.
It was a little chilly when we departed...
Real sad to read. May he rest in peace.
Question to those with a Bayrunner Baja, I have a tiller T8 Yamaha kicker that I'd like to mount on my 2000 19'-er . Any picture of where and how...
That's some funny FUCKING shit.
Very nice indeed!
This belonged to my fishing partner who passed last Aug.
It was mounted on his boat only about a dozen times when Bass fishing in the Sacramento...
I have a MOTORGUIDE WIRELESS 8M4000137 75# 24 volts
Wireless Foot Pedal
Wireless Hand Held Remote
54 “ Long Composite Column
I immediately flush w/o salt-away at the wash station after placing my boat on the trailer but when it's slipped during crab season, I do flush...
Damn this is a tough crowd LOL.
What's that yellow handle tool used for...ripping fish gills? If so, where can one be found...
Nardo, thanks for the link that included prices :-) .
This may help answer your question.
What material did you make the house....plywood?
It's not only craigslist, we have them here in the classified 8-) .
Good to know that the 102lb added weight from the Merc to the Yamaha waterline was negilable. Thanks for that info.
A man boarded an airplane and took his seat. As he settled in, he
glanced up and saw the most beautiful woman boarding the plane.
He soon realized...
Thanks for the tips guys on where the drain and fill tube were located. After removing the lid that the previous owner screwed down I located and...
Couple of issues that I had with my boat.
At 69yrs old, I need to sit at times and the live well is actually designed as a leaning post.
Nice looking boat Gil.
I'm curious as to how many Bayrunner Baja owners have repowered to a 90hp 4 stroke without any issues?
I do have a shut off valve but when I tested it in the open position while on the river, the pump hummed but no water filling the tank. I even...
Only looking for Yamaha F90 20" shaft with lowest hour possible and great condition binnacle and rigging. Year between early to mid 2000, priced...
I've been searching for the past month for a used Yami F90 but still haven't found one at a reasonable price. They're either priced too high or...
Will take it under advisement gonzo25, Thanks
I was thinking the same thing being that I have short arms.
I'm also looking to repower from the existing 50hp 4 stoke Merc to a Yami F90 but...
Ah ha! No wonder I didn't see it... because of the tank lid.
I'll also trim the boat trailer for optimum drainage.
I'll check it out, thanks.
I have a question on the live well on my new to me 19’ Bayrunner Baja. It rained the other day and noticed that the tank is 1/3rd full with...
Several years ago I owned a 2000 19' Bay Stealth by VIP, an excellent Delta and SF Bay boat. Current owner fishes in the Monterey/Santa Cruz for...
Got a buddy interested. I sent you a pm yesterday.
Furuno 6" Echo Sounder LS-6100
· Frequency 50/200 Transducer
· Speed, Paddle Wheel Sensor
· Resolution (VxH) 240 x 320
· Screen Size 6.0
I sent you the pics as you requested.
How long are the cables and does the wiring harness come with it?
Still on the boat to test.
Furuno 6” Echo Sounder LS-6100
· Frequency 50/200 Transducer
· Resolution (VxH) 240 x 320
· Screen Size 6.0"
Garmin TR-1 Gold complete package that includes
* Cylinder Bracket for Yamaha T8 or T9.9
* Throttle Actuator Kit
* Owner's Manual
Depends if you want all the bells and whistles. If you're just wanting to record the day's activity then buy the Hero2. If you want more...
I'll take this box and pay shipping.
I just looked and couldn't find it. You got a link?
Let's reverse this picture...what would you charge your friend if he brought his 12 yr old son?
Wind 26-36 mph
Duration 9 seconds
Doesn’t look good to me.
Hey Aggro, you da man. The wife got the block turned off.
Thanks to all who replied.
I can read the content but no pics.
Just a quick search but here's one that I'm thinking that OP posted a pic. I can look for more later....
Why aren't I able to see pictures on some post and can see on others?
As others have written, I use a 40 amp fuse and have pulled commercial round pots w/o blowing any fuse. BTW Ace has upgraded their motors to pull...
I have four Scotty snubbers $30 shipped to your door.
I switched over to a Tekota 600LC last year and am quite pleased with it. I know how much line I let out when attaching the clip and I know how...
Yeah the wind gods haven't been kind to us.
Next week looks about the same.
I’m sure everyone has a guy or gal in their circle of friends that “knows everything, done everything, owns everything, etc, etc”. We have one in...
My fishing buddy suggested that I make a "gill ripper" so that's what I did. Took a 7" long bolt, cut the head then bent it about 110 degrees. I...
I too have/had the Brutus that I used for three seasons. A very good, inexpensive puller. Ace has upgraded their motor in '13 that pulls more...
Raley's Grocery will sharpen knives for free.
I too just brought a pup home. Big mistake...it's so full of energy that the our two Poms won't play with him. I should have gotten another...
I bought a Scotman's shaved ice machine last year off craigslist. Best buy I've made. I make two 20# bags of ice for a one day Salmon trip and...
Based on the pic w/Blue connector it's for a Lowrance.
Thought I'ddd share 8 minutes of video from my last trip at Bodega on June 26.
Congrats on your day!
I'm headed out tomorrow to fish for Wed.
It's a C-Hawk 22' Pilothouse. There's identical one in the classified for sale ;)
Thanks for the advice Mark. I'm new in Salmon...
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:DoNotOptimizeForBrowser/> </w:WordDocument>...
I buy half scoop and it's still too much bait for two guys.
Damn you're good!
I'll be headed there on Wed. Hope the bite gets better.
Cannon because they're priced right. I just bought two more so I can invite two more guest to troll for Salmon.
Humm, my dog said that Sunday looks a little Ruff. But what does he know, he's a dog :cool: .
Sunday: SE wind 16 to 18 kt. Partly sunny. Mixed...
Congrats on your retirement. I did the same thing 14 yrs ago and know the feeling ;)
Yamaha by far is the best.
Tilt and trim are both accomplished with the same button if you have one.
You'd tilt-up the motor when trailering and trim the motor to raise or...
My dog could have used that class because he was nailed by a 4' rattler. Spent over $1500 Vet bill to save him. He's worth it though.
When I first installed mine, I brought the boat to a lake, called Gamin who walked me thru calibrating the unit to the GPS and answered any/all...
I made this with ABS 3" reducer and cap. Mounted on my rocket launcher and has a clear overhead view of the cockpit. Note that I have a USB cable...
Great play by play report as well as excellent pics!! Thanks
It justifies that no charges are filed. But let anyone else with a pitbull attack and kill one, then off to the "county" jail. :1041677399:
Ahhh, to be young again....
If you don't need all the bells and whistles then the Hero 2 will do the job whch cost less than the Hero 3. I just bought a second H2 to mount...
I installed mine too. When I tweaked it, I was on a lake and called Garmin Tech to walk me thru step by step. Good luck.
Did you mark fish?? j/k LOL
Stripers and Rockcods are also pretty good eating
No longer needed
Both Cacutta 200 have been sold
Corsair CS 400 still avilable.
Calcutta 200 have been sold
Corsair CS 400 $50 plus shipping. In very good condition with very minor scuff marks.
Shimano Tekota 300LC (Line Counter) filled with $40 worth of 35# Power Pro Braid. Used twice, no boat rash, in excellent like new condition. Comes...
Galvanized wheel with very good tires.
4 new axle springs
Measures 24 from coupler to back of frame. 26 ½...
Reels are ***SOLD***
2 Tekota 500 non line counter filled with 80# $40 worth of Power Pro Braid.
Both in excellent condition, like new, no boat rash.
Will trade one...
A fishing buddy just finished his pilothouse just last summer.
Shimano Takota 500 (Non Line Counter)
<!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="1026"/>...
I have this aluminum trailer that is currently carrying my 22' Pilothouse. New disc brakes, actuator, galvenized wheels with new tires and LED...
Surprisingly well. Limited out on two outings within the first couple of pots then tossing back the others. IMO, it's better than before when I...
I have two 100 (I'm keeping one) in excellent condition in it's original boxes and pouch $110 each or $200/pr plus shipping and insurance.
6 of 8 pots stolen at Bodega Bay since opening day doing the overnight soak. Now I drop 6 pots, soak for about 3 hours, pull and store pots on...
White Cap and I were out at Bodega last Monday and limited out on the 1st two Danielson pots and had another two or more limits in the remaining 4...
Great pics!!! Thanks for sharing.
$2500 is what I paid. The boat was positioned that ways so that I could back my truck, hook on and drive it off the flatbed.
I have two Calcutta 100 with very little use and each comes with reel bag and in it's original box. Here's a pic of three but I'm keeping one.
IMO, rather than cutting a hole to install I/O, now is the perfect time to attach an offshore bracket on the stern and put an OB.
I bought a 22' Pilothouse from Fl and had it transported on a flatbed here in the Sacto area about 6 months ago. My thought was that it was a...
I've got my boat berthed at Bodega Bay and been out four times, limiting out. here's my a pic from last Wednesday where I pulled 3 pots and got 3...
While trolling for Salmon out of Ft Bragg the downrigger wire wrapped around the main prop due to the blowback. I was out about 7 miles, fired up...
My buddy Al and I hopped a ride at Bodega Bay where we got 4 limits in 5 of the 8 pots 5 hours. Didn't bother to check the last 3 pots being the...
Haven't had it out yet.
Airmar P79 Shoot Thru Transducer for Garmin
Base never mounted and transducer was used only a couple of months.
Comes in original...
Here's a link that give exactly what you're looking for. http://www.thehulltruth.com/marine-electronics-forum/439668-garmin-gsd-24-a-4.html
Upgrading to a GSD 24 but won't be delivered until next week. This one is still in the boat. Comes with power cord only.
$200 plus shipping....
I have Garmin Blue Chart g2 Vision VUS037R Vancouver WA to San Diego, Ca for $175 mailed to your door. Bought it for my Garmin 4212 but ended up...
All new, never installed. $65 plus ride
Attwood Bilge Pump 1200 gph
Attwood Thru-Hull Connector 90° 1-1/8 I.D Hose
I have Garmin Blue Chart g2 Vision VUS037R Vancouver WA to San Diego, Ca for $175 shipped to your door. Never used.
Can you use it?
Want to buy 4 stroke 25" shaft with controls with low hours and in very good condition.
Cabin Cruiser Hardtop
20’ 1986 Beachcraft by Reinell
8 Passenger Capacity
Cuddy Sleeps 3
Aluminum Offshore Bracket...
CMC Hydraulic Power Jack Plate in very good condition. I just removed it from my boat that had a Yamaha 150 hp 4 stroke motor.
Are Cannon DR warranted for life?
+1 Power Pro
10.4 diagonal screen. Unit is about 2-1/2 yrs old. Reason for selling is that Ive upgraded to a Garmin 4212 that includes radar.
I know I've bought things thinking that I'd use it a lot but ended up being not the case
So thought I'd ask if anyone have this card and want to...
TTT will consider trade for a GSD 22
Unfortunately a floscan can't help with a Yamaha 150 four stroke. Something to do with a double fuel pump (?)
Anyone have one that they want to sell?
Would have been nice if she had hand tremor [IMG]
Beautiful Pilothouse, nice work [IMG] . You'll get many, many years service from her.
Sold on 1/18/12
More info from Floscan
Fits all carbureted inboard and stern drive engines up to 350 hp.
Fits all EFI inboard and stern drive...
I bought this unit new about a month ago and realized that it's too small for these old eyes and replaced it with a 4212.
This comes with the...
Yes, it's complete consisting of Gauge, sender and wiring. You'll need to buy the 3/8" fuel line, length depending on where you hook it.
Now here's a looker :rolleyes: :D
SOLD on 1/18/12
Model 5520B LFGD317
MFG Date 6-12-08
Comes with Gauge, sender and wiring.
This was on the boat I recently...
I have a 22' Winnebago with 35K miles. In very good original condition. I pull my 4.5K# cabin cruiser with it with no problems. Sleeps 5.
Boat prices are relative to the area you're at. I looked for many months for a pilothouse boat here in the west coast. All were too much. I found...
Who has the best price on the new Hero 2? I'm ready to buy one.
Thanks Matt, I just read it and sent him a PM
Anyone with a 4210 or 4212 that's upgrading to a touch screen?
If so, please let me know.
Evinrude 130 hp 2 stroke 25" shaft
Off of a 1998 21' Striper
Main Wiring Harness
All for not.
Motor has been sold at full price.
Thanks to all who showed interest.
Then don't buy.
Forgot to mention that this Honda is still under warranty.
No Longer Needed.
Honda F150 four stroke outboard motor
· 2007 model
· Approx 650 hours
· 25" shaft
· SS prop
I voted for other being that my 22' C-Hawk wasn't listed but then again, I didn't think it would be.
I just bought this and had it transported...
So is it still for sale? If not, I'll take it.
Use the Hawaiian version...."DA"- Kind
Boat has been sold to BD member.
Several inquiries, so back to the top
I bought a box at True Value Hardware.
Like my dog said when I asked how the economy was...he said, "ruff"
Man, that sucks :rofl:
I just bought a Pilothouse from Fl without even seeing it, let alone sea trial.
Paid thru the nose transporting it on a flatbed.
Check with any of your buddies to see if they have the same unit as you then take your FF, mount it on their boat and test it. If it works, then...
Here you go.
I'm located in the Sacramento area.
Yamaha 150 2 stroke outboard with low hours (no hour meter)
Curious if anyone owns any of the boats listed in the Sport Cabin Pilothouse model? I don't know much about them other than what I've read on the...
Put a couple drops of oil on the cutter as you turn to cut.
I just bought a boat with a Honda 150 and currently have a Yamaha 150 both 4 stroke. I'll remove the Yamaha from old boat and mount it on the new...
That certainly didn't look staged :eek:
Hey Steve, isn't it Wed morning thru Sunday evenings or are they now closed Monday, Tuesday and Thursday?
Weather hasn't been very good lately but Stripers should be moving in the Delta soon and as for Sturgeon, lots are being caught but not being...
As always, great report Tomo. We need to hook-up one day soon.
Don't know if you're interested in fishing for Sturgeon or Stripers but there's a few charter boats in the Sacramento Delta and Suisun bay.
Read before Posting - Boat Classifieds<!-- google_ad_section_end -->
<HR style="BACKGROUND-COLOR: #000000; COLOR: #000000" SIZE=1><!--...
Separate names with a comma.