will you ship?
$350 for all of them, right?
Mercruiser in title, VP in body of text. Which?
House AC light switches? That's a little too shade tree for me, but I guess they work. Not waterproof however.
Actually a bent piece of wire works here also.
Can I park my vehicle at any of the boat launch ramps overnight?
San Diego Bay has four (4) boat launching facilities located in convenient site...
Reopened under new owners.
Got something to back that up? Inquiring minds want to know.
If you sell to buyers in the US, some states may require you to collect applicable Internet Sales Tax on your transactions. As of...
Have you noticed it's November? Less than a month till winter.
If you lose the bottom as you increase speed, then it usually means the transducer install isn't fine.
Still on the web, new owners
Ebay is the one collecting the tax, not the vendors if I understand correctly.
The Mercury outdrives (Alpha and older) have an interrupt switch in forward and reverse. Basically, when you shift into any gear, the switch...
A BV-500 doesn't have a cast control. It works the same as your HX.
Don't email, call Okuma
He has a regular HX, not a Raptor
OK, here is how it goes. Set the lever to strike, and check it with a scale. If it isn't where you want it, put the reel in freespool and adjust...
Where I come from, anything over a 12 hr trip requires 2 captains and 2 crews. The off duty captain and crewmen very often fish.
Good info here:
You might have better luck in the "Rods and Reels For Sale" section.
Menu from a Gulf of Mexico boat
Same reel, different color, if you are referring to the baja special vs the US Senator. If you are referring to the 113H (or 113H2) Special...
Gafftop, short for gafftopsail catfish
If you want the best, it's a Lindgren-Pitman. The problem is they start at $5000 and go up.
No bitterness here, just wonder.
Do people not understand the word "Tutorial"
A bent butt rod works best in a 0 degree rod holder, a straight butt needs a 30 degree holder. We always put two on each gunnel, the ones closest...
I didn't learn anything from this tutorial.
Cal Sheets is a him, not a thing.
You are welcome
Power button = ON
627 posts of pure uninformed BS, guess's, "feelings", and "logic". Let this thread die.
It has absolutely nothing to do with anything. It's some sort of marketing gimmick. One reason many people think a drag rating makes more sense...
I've never seen it recommended to put a 14K trailer under a 6k boat, just the opposite, in fact. It will be too stiff and the boat won't compress...
It depends on the time of year. Most tuna fishing is done in the fall and winter, though some boats chase blackfin tuna behind shrimp boats in the...
The Saragosa is a proven tuna reel, especially the 10000 and up. Proven on larger tuna, not just schoolies
Not needed. tie the arbor knot and leave a tag end. Lay the tag end across the spool and wind the first layer tightly over it. This is per Jerry...
Be sure and use a drag grease, such as Cal's, and not just any old grease.
In CA: https://www.pure-gas.org/index.jsp?stateprov=CA
Not "weighs at least 500 tons", but "displaces more than 500 tons".
What's boring and uncomfortable about it, especially the tuna part?
4 engines. Scania from Sweden. It will actually do more than 21 knots if pushed
Sorry, didn't see the first two posts. The thread opened on your post
Classifieds are the place for this. Don't forget a price.
Simple, it was an older wooden boat, probably with some fiberglass. It would go up in an instant. It was built of flammable
material, like most...
"Holes ass"? Hmmmmm
You might have better luck posting in the Classified section.
All kinds of good fishing. Different, but good.
They have multiple fish boxes and tons of ice. The fish are hung just prior to docking to facilitate handing the fish out (and to look good). The...
You haven't the slightest idea what I believe, so don't try to tell me what I believe. I will give you a hint, though. I believe all the facts...
Yes, completely OK. It's their money to do with as they please, not what you think they should, and, no, it's not a sign of a conspiracy.
Simple. Send or take it to Avet. BTW, brake
Where is the required price?
VHF is line of sight. You just lowered your antenna 4 feet. Figure it out. I always raise my 8 footers another 4 feet.
Look for a 9, 109, or 10. If you want a larger reel, 209 or 210
Sabiki rods don't work well with spinners. The line goes into a small hole in the rod about 4 in from the reel seat and travels up the inside of...
So your reel is a woman of questionable morals?
You can't go wrong with either Teleflex or Morse controls and standard 3300/33 cables.
Not mentioned is the nut being too tight will cause the same problem, perhaps even more.
You obviously have never fished the Gulf of Mexico. Tying up to oil rigs is pretty standard. The big problem we have is they are removing all the...
Looking at the very blunt bow and 18 degree deadrise, I suspect it will pound.
Call them and ask.
It uses any autopilot electronics for course holding, etc.
Does anybody know what a tutorial is?
He's in Florida
I have 18 Accurate's and have little or no trouble with them. I let Accurate do the first service then I handle them myself. Easy to work on (if...
Have you heard about the new forum called "Classifieds"
Marine Power engines are good motors with lots of extras, such as remote oil filters and oil drains. I had one of their 454's in one boat.
If you are getting a popping outfit, then get a real popping rod, not just any old rod.
I've noticed the same thing on TLD 2 speeds. It's mostly because of the short handles Shimano put on them.
First of all, those weren't "my numbers", they were your numbers, and they were from 2019 not 2011. Remember, you posted them, not me. I was...
The reserve is 143 mt, the quota is 125 mt the way I see it. Also, FYI, a MT is 2204.62 lbs. Now that is straight, what was the point you were...
It depends on the line size vs the lb test of the topshot loop. Same size, one is usually sufficient. Different sizes, two or more loops.
This is the only part that makes sense. They have a quota, they can't "decimate entire species". They are regulated, just like recreational fisherman.
Maybe they are from a different coast where you cannot process at sea, such as the Gulf Coast.
I just can't grasp why East Coast and FL guys ask their questions on a West coast board. Different types of fishing, especially when you say...
That's approximately what the credit card companies charge them. No different than sellers on this site wanting the buyer to pay the PayPal charges.
Doesn't look that bad
Mercury makes one but I think it also requires a bow thruster....
Google "bullet proof 6.0"
A magnet there won't do anything. The spool needs to spin in the magnets field for the braking effect
Halco 130 Max
I wouldn't use those sleeves and only use a proper cup to cup crimper. Lots of info here:...
Personally I would ask a FL board rather than a CA board for info an fishing in FL
Still sounds like it is over filled. Look under the spool to see if the line is rubbing on the bottom of the frame.
Accurate says that if you can't get the stated drag, something is wrong and they need to see the reel. As for testing the drag with an empty...
And the car rear ending comment isn't always true either.
FYI, the line IS the rode. i.e., The rode (also known as anchor cable) is what connects your anchor to the boat.
Actually that wasn't Alan Tani, it was Alan Chui of Pro Challenger.
You better hope not. They are talking about giant squid, not dinky Humbolt's. Giants can run 30 to 40 feet long.
Who says it's a deckhand designed reel. That's just what you use it for. Personally, I wouldn't own a deckhand rod, even for throwing irons, etc....
Smooth is not always the best thing. Brass gears vs stainless gears.
The clicking isn't the starter. The clicking is the solenoid, probably due to low voltage. However, Chevy engines are notorious for eating...
scroll down a bit
Probably work you harder than the popper.
What pound test does this fish best?
I don't know why this is so hard to understand. If you're using poppers, you need a real popping rod, not just any spinning rod. Popping rods are...
It supposedly helps with wind knots, etc. It's on purpose.
Those are repair TUTORIALS, not a shimano forum. Google "Tutorial".
The guy that suggested the Formula 233 is correct, however you need some horse power. They are very deep v's
I don't see that True world lists the 242 anymore. Anyway, everybody keeps talking about Volvo stuff, but if I remember correctly, the True World...
Have you thought about selling stuff in the Classified section?
X2 3m adhesive remover
A Haywire twist doesn't work with stranded wire.
Cats aren't the only hull that drifts sideways. I've had two monohulls that did the same. One, a ChrisCraft, would drift sideways even with a...
Most new radios let you monitor more than one channel at a time. Also remember that 16 (and 9) are the hailing channels. You must first initiate...
Mudhole.com has lots of videos. You can try:
Or just hook up an external speaker. Page 31 of instruction manual. Lots cheaper and sounds better.
Why don't you ask them?
Why are we still answering old posts?
Adolph's plain meat tenderizer helps with both stingray hits and jellyfish
I almost forgot www.2coolfishing.com Some of the party boats are there.
If everyone would quit answering these 9 year old posts, may be they would go away
Do you still have the harness lugs?
The instructions say to pull vertically. It apparently just pulls straight out.
For salt offshore party boat, the New Buccaneer out of Galveston. Freeport is another option. As you said, freshwater is everywhere, depending on...
Look at the date
Do you ship?
You need to sell your kid?
Have you thought about the Classifieds?
I'd be curious as to where you are getting your info. It doesn't jive with what I've read and doesn't seem correct.
TX tried the 365 day license and noted a sharp decline in sales. Seems like it was easier to remember to renew every Aug 31, than to remember what...
Have you thought about posting in the Classifieds?
You need to read better. 55K didn't make the minimum bid
Buy the one you like the most!
State water red snapper is open all year. Port Mansfield is a good place for that. Kerrville is closer to Port Aransas or Mansfield than Galveston.
Try posting on 360tuna.com or 2coolfishing.com, both TX boards. Probably have better luck than posting on a CA board.
Thanks. It needs to be 3" wide
Not to close to Kemah though.
I've bought a bunch from this guy. Nice heavy duty covers.
It appears to be a transducer that can be raised or lowered for use.
That's one of the reasons.
I never go smaller than 10's on SW rods, for many reasons.
I need a spool for a Tiagra 50. (not a 50A or 50W or 50WA) TT0310 or TT0561
Doesn't that piss the lions off?
I disagree. Tabs should be located as far outboard as possible for the greatest affect.
Update: Sorry, I just realized that you were talking...
What voltage do they run on?
For the same money, you can probably buy a used Baja Special/US Senator and have all the advantages of th113H plus better gears, drags, etc. Don't...
If you can find one. Rather have a Baja Special / US Senator
So you post on a CA board?
My point exactly
I keep hearing how hard deckhands work. Isn't that their job?
Pro Challenger has his own website:
This makes no sense in so many ways. Your reading comprehension is some what lacking.
Ordered them? You can buy them at Walmart, cheap.
social game fish?
The homeless in CA have cars that need parking? Wow! We mostly have carless homeless that hang around downtown.
I don't think anyone knows what his problem is. I certainly don't
I don't believe there is a standard, and yes, it's often a mystery. It's often whatever marketing thinks sounds good.
Manufacturers (at least their marketing dept.) often over or under rate rods. Also, rod ratings are somewhat subjective. What fishes fine for one...
When ever I see a rod with a separate braid rating from the mono, I just ignore the braid rating. Think about it. How can a rod bend differently...
Actually, he said that a Pursuit rode like a POS. I guess others have reading problems also
Every little bit helps, especially on a consumable that you need every trip. $28 a trip adds up, so not "crying", just being sensible.
Not just CA. In fact, it's a Federal law, at least in the Gulf of Mexico, and I assume everywhere else
That is an outrageous price for 20 lbs of ice. The ice dispenser near my house is $2 for 16 lbs and I think it's high. Bucky's (a convenience...
They are all over ebay
I was on the New Lo-an years ago, and instead of a beer can, they had their's hooked to a small canister type air horn
I made mine out of 1/2" PVC and heat shrink and have no problem. Maybe you need a harder heatshrink. I think mine was Harbor Freight heatshrink....
If you wouldn't take it, how can you sell it?
There are some that would argue that point, myself included.
You might try the New Buccaneer instead of the Capt John
I was just referencing the link in post #22. No comprende Man Bear Pig
On what part? That I did it for a living? Or passing inspection? Or your crimp can fail?
I used to do this for a living at one time and any lug crimped with a tool like that would never pass inspection and would be ripped out and I...
"Scientists say that some of the above-normal precipitation this winter in parts of the West is related to subseasonal variability attributed to...
That is not a good crimper. Battery cables should be crimped with a proper crimper and the correct die for both the cable and the lug.
It doesn't have that sort of output.
Great lakes Skipper has that exact gauge...
The web site says 30-80. It doesn't say it's 80 max, it's just the most common used line class.
Knots are fine
Not TT but 5'2" sounds about right for a jigging rod. Why do you need it longer?
Or Google "mercruiser continuity circuit"
Manual for what?
Have you thought about giving them a call?
Love them "farhorn 40's".
You are way over thinking the location of the pins. If they worked for cloth, they will work for carbonfiber, which is tougher.
I try to use...
Why not try it without the glue and see if it's needed. You can always glue it later. BTW, I believe it was the corrosion behind the drag that...
that's a 2012 artical
Another great tutorial!
Only if you let all the line out
Why would you want to screw up a nice looking boat with a pilot house, especially since you have a very nice (and probably expensive) half tower?...
Much better. Remember to grease it with Cal's drag grease
If you like salt all the way down to the spool, the back of the boat method is great.
I made one for a TTS30 out of sheet carbontex. I believe I got the sheet on ebay. No need for gluing. Just search "sheet carbontex" on ebay.
Jerry Brown recommends 10# of drag, I believe
Same stuff. Voodoo bought Bullards
What about the screws you took out of the lugs?
There are some stranded wire leaders that are made for tying, such as Tyger wire, but all others need to be crimped.
Not on that old of a reel. It was optional
lug nuts? Valiant's have wheels? I'd call Accurate. They list lug covers for the Boss series of reels on their web site but nothing for the...
The gp7000nt doesn't have built in sonar.
The Mercruiser 3.0L 135hp is a 4 cyl and very available. Any higher HP requires you to go to a V6 or V8, which is wider. Believe me I wish there...
I have that cooler. Bought it in the store.
Nope, side cutters are different
The OP wanted low profile. Avet's aren't low profile
Side cutters are a different plier from a diagonal cutter. Think 9 in Klein's.
There used to be a hotel on that pier and fishing was allowed at the T head. I don't think fishing is allowed anymore,
Those aren't for hooking your lure to, although you can. They are harness lugs, where you attach a fighting harness.
Also look at the Penn clamps. They have a variety with rings. Try
See post number 4
Not with that big of a prop
As noted, hollow splices are 100% and if done properly, invisible. You can't really tell where they are. They are not a potential point of...
Float-On trailers used to have something similar on their trailers. They don't any more. Makes you wonder.
One of Bass Pro's house brands used to be black. Having said that, why black? You can't see it at night or even in the daytime very well.
Have you tried the Classifieds?
Penn has a stock 5 stack you can get anywhere, 6-113HSP. The best is the aftermarket 7 stack (from Mystic Parts) or one of the insert drag sets...
A shaft, strut, prop, and rudder aren't in the water all the time?
I just tie a 3 or 5 hook dropper loop bottom rig, usually with 1/0 Owner mutu hooks and 50 lb mono for vermillion. The size of the weight on the...
The higher braid rating is stupid. A 20 lb rod is a 20lb rod regardless of what kind of string is on it. JMHO
X2 for Pinnacle Marine. I have two of his bent butts and love them
Another great fishing rod tutorial
Does this mean we should fire all those scientist that do this for a living?
Have you priced new Tib frames, straight from Tiburon? They're usually cheaper than from the auction sites. I've never heard of an International...
Isn't the Alps chuck the upgrade?
Butane works just fine for 56 silver. Have done a zillion rings with it.
One problem. The major rental companies don't allow towing with their vehicles, so read the fine print.
The problem seemed to be fixed back on post #19
Gee, maybe split ring pliers.
Maybe it's a female bonito.
What kind of electronics are these?
Catchall Tackle has everything you need including the clear tubing. Great place for crimping gear, etc.
I run my electric reels off of one from Harbor Freight.
What gear ratio is the 400n and does it have the clamp?
Personally, I would go to Accurate and get it fixed
Galveston is a little closer and Port O'Conner is a lot closer.
Has everybody forgotten where Phenix rods come from?
In addition to an 8' antenna, I always add an extension. On my old 25' ChrisCraft I had 4' extensions mounted on the cabin top, and on my current...
Who would have thought that the click of a tiny dog would drive so many people insane. I don't find it annoying at all, I find it comforting.
pm sent a few days ago
A lot of art supply stores can make the decals/vinyl names and very intricate designs can be made. You feed in a picture and a computer cuts it...
4. I almost forgot. The New Bucc has a large double livewell, so if you can come up with live bait, they have a place to put it. Some people fish...
1. People arrive and start placing their gear in a line at the dock. Everyone has to go to the office and get their ticket and have their credit...
What Seeker rod is that?
What gear ratio?
If I remember correctly, Kevlar's natural color is yellow.
The Mutu's are a good choice. Since red snapper season is over, I use 1/0 mutu's for the beeliners (vermillion snapper) or sometimes 2/0,...
The early ones were not topless.
Who steals boat covers?
The Knipex cut so much easier than cheap bolt cutters, it makes them worth it.
I will never understand why the sound of dogs bothers some people. If nothing else, they prove the reel is working. Now people winding with the...
If you're popping, use a popping rod. They are made a bit different to handle the poppers. 7 1/2 to8 ft would be about normal
Out of Port Mansfield it will be state water snapper, open year round. That's why the limit is 4 instead of 2.
I've done the Fisherman's Landing boats out of Port A, some boats out of Freeport that aren't there anymore and lately I've been sticking with the...
You would have better luck asking this on a TX board rather than a CA board. Try 360tuna.com
iphones and ipads have a GPS in them. No phone tower required. Both of mine work 120+ miles offshore.Why spend extra money on a GPS when you have...
Where I come from they are called Little Tunny, though some call them bonito
The old Bucc never ran tuna trips, which is what the 30 hr trips are, combined with bottom fishing on the way out. I don't think the old Bucc ever...
Straight down I35 to San Antonio, then I37 to Corpus. From Corpus you can either go to Aransas Pass and take the ferry or go through Corpus and...
No. Very few of my rods have two ratings. This was first noted on vertical jigging rods and made no sense then. I've mostly noticed this on...
The whole part about the braid. It made no sense, just like having two rating doesn't.
The PE rating has to do with the diameter of the line, not the lb test. It's roughly 100+ lb line, but 55lb max drag could be 165 lb test.
It's not that good of a cooler. I have a bunch of these and they are very handy. The problem I have is the boat I go on doesn't allow coolers and...
This is Marine Electronics Classifieds, try USED Boating Accessories For Sale.
Doesn't anybody know what a tutorial is?
The thread is 3 1/2 years old.
In TX I don't believe I have ever seen a launching ramp with washing facilities. We either use a car wash or wait until we get home, or both....
Why are you "spoiling" the spectra?
I use a surgeons loop knot with good results. BTW, the person who said that there wasn't a stronger loop knot should qualify it by saying "when...
Are you steel offering this?
Just an FYI. Super Mutu's don't come any smaller than 4/0
My Ambassadeur 10K isn't a levelwind.
what gear ratio?
Jigmasters, the squidders have a different bolt pattern.
Well I've done multiple Jigmaster, 113H, and even a 114H (just a narrow)upgrades with no "intended use", so I can relate. I mean sideplates,...
And the Jigmaster too. I know, I keep upgrading them all.
Different reels. Only you can decide, but the 114h has 2.8:1 gears (3.25:1 available for $$$) and a Tib frame would be nice ($$$). The US Senator...
I used to love the old Radio Shack waterproof speaker for this, similar to these:
I much prefer down locking reel seats on all my rods.
That mounting bracket is for a Danforth style anchor.
I always liked mine to be open in the front, maybe not as far as yours is, but open. Makes line handling easier and you never have to worry about...
The places I use to fill spinning reels with spectra only use the spool, not the reel. There are adapters for some line winders that hold the...
Bit of a difference between a trolling motor and a kicker.
This is a tutorial?
Love my RCJB84XH, but then, I love my RCJB84XXH too.
That won't work on an Accurate. The second drag is in the way
If you had gone down a little further, you would have seen the instructions for converting using Garmin Homeport, which is still available free...
Google "convert .adm to .gpx". Lots of choices.
Inshore fishing is a long way from Austin J/K
40-50#, Penn 113hn or Penn US113N
Only if it's done wrong.
Might have better luck in the Classifieds
WD-40 is a solvent, not a lubricant
Not exactly true. Higher gain narrows the focus of the signal. As the boat rolls, the signal on a 9db antenna will be directed to the water or up...
I have rods that have both a fighting and a max drag rating, in addition to the line ratings
Common on some of the TX boats. Very helpful
Then what is the point?
Loop knot, or solid ring then split ring, or swivel with split ring are just 3 of the possible ways.
Seems like a split ring would be easier.
They are native on the Gulf Coast and they don't devastate anything. You should hope that they get within range. Great fish, and, yes, they taste...
They were sold on ebay by fishincomfort. They are very nice rods. I have a complete set and love them. The early ones had chromed guides and the...
I aqssume that you are talking to texastuna, and not me. Don't forget the Galveston boats. Closer to the tuna and closer to you. I recommend...
Gecsr1 is correct. Mudhole has eva from .300 ID on up. Look for their EVA Vertical Jigging Grips
Tell us how you really feel. BTW, in all my years offshore, I've seen many more broken down outboards than I/o's. Just saying.
You obviously didn't read everything I said. The OP was thinking that custom rods were "fitted" to a person and someone else may not be able to...
The cable drive units referenced above say you can overpower it, no problem.
So, where is the tutorial?
I try to use hollow exclusively and I haven't noticed any difference between solid or hollow as far as water resistance goes, and I sometimes fish...
This is just a drive unit. You still have to buy an autopilot for the electronics
Factory rods are mass produced and everything is the same. Not all blanks of the same model will be the same or bend exactly the same. Part of the...
All over ebay
Might not make much difference on the west coast (don't really know) but desperately needed on the Gulf and Atlantic coasts. NOAA is currently...
You are missing the point. My foot pedal (from Sato) is a 6 amp variable speed, plus on/off. The drill trigger is locked and all control is in the...
My 1/2 in drill motor winder has a foot pedal. The Sato comes with a foot pedal. Just push in the speed button on the drill where you want it an...
http://boatwindshieldrepair.com/ is the place. They made most of the smaller boat windshields (<30 ft) to start with.
This seems to be the hardest thing to get across. If you are building a popping rod, use a popping blank. They are different from the usual West...
Simple. If you are fishing poppers, get a popping blank. The RPT series, as noted above, are popping blanks. For a popping rod, I like the 8 foot...
I use this:
My line winder is made up of Bees Knees parts and...
But does it make sense?
Just "bumping" the ad back to the top of the list, so that it shows on a Find. Any word or letter will work.
So, how much?
As noted, the Dolphin Express is out of Port Aransas. The New Buccaneer that was mentioned is out of Galveston. There are other boats that do tuna...
Did all of you miss the sentence "The anti skid is good ."?
Make sure it's Marelon and not PVC or some other plastic. Marelon is the one rated for below the water line. Marelon is more expensive and...
Start off with a real popping rod. The PCH rods aren't popping rods
Marelon is rated for below the water line. Perfectly safe. U.L. and A.B.Y.C. approved
Assuming you mean a 113H, then, yes, the drags can be upgraded, along with most every other part on the reel. Even Penn has an upgrade to the...
I've heard that they are excellent reels but have been out of production so long that parts are a problem.
Why would you want to compare a popping blank to a surface iron blank. Different blanks for different purposes.
As far as limits go, YFT is 3, bigeye is no limit, bottom fish vary. Vermillion snapper is 10 a day with a 2 day limit on multi day trips,. The...
Is that $200 for both?
My Charter specials have the level wind removed, but the frame was replaced with an aluminum one from Alan Tani
Don't forget the Shimano Charter Specials.
Don't forget that any of the A series will work, i.e.,A65, A67, A68, or the largerA7, A9 etc. I saw some nice ones on ebay....
scroll down a bit. The 500 one will work
That's what it does, it just sits on top of the yoke. Your pictures look correct. All it needs is the bridge installed. You are making a problem...
Not sure what you mean by "snap" into place. It really doesn't "snap". Your pictures look fine, You need to align the screws and push down when...
Venice, LA You won't regret it and New Orleans is just up the road
Pinnacle Marine in San Antonio and on the Hull Truth
One other thought. Go to 360tuna.com. The capt of the New Buccaneer, Matt, posts over there and is very helpful.
They will have plenty of bottom rigs onboard, though I prefer using my own. BTW, Halco 130's are swimbaits, not poppers. Some people do fish...
Will this never end?
There is a Boss 270 frame on ebay:
It's just gay electrons.
Have you eaten amberjack? It's very good. Nobody I know eats Jack Crevalle, at least not the Atlantic/Gulf version.
Southwestern Parts and Service shows to have both. BTW, have you tried calling Daiwa?
Some gold's are worse than others (though, IMHO gold reels suck). The Mak gold is wonderful compared to the old Pro Gear gold.
Amberjack seem to get a lot bigger than yellow tail. 90-100 pounders aren't that uncommon.
Yes. The Gulf is very shallow near the upper TX coast compared to the Pacific, especially off Houston/Galveston, creating a choppy sea. Where the...
More like 30-45 minutes, depending on where in Houston you are.
Tesoro vs Trinidad, sounds like a welter weight fight card
Not necessarily so. Many fish have to move to breathe, most sharks being an example.
I don't know of any aluminum boat trailer manufacturer that welds the aluminum except possibly Myco. They are all bolted together. Maybe that is a...
Mine Flote On is over 40 yrs old. No cracks or anything like that. Did replace the axels. Has a heavy, twin engine 233 Formula sitting on it....
Who cares! Plan on servicing any reel you buy as soon as you get it and you will be OK. This includes new reels.
Be thankful for data. In the Gulf of Mexico, NOAA get their data from a Ouija board or something similar. We now have the situation with red...
Just replace it. There are no short cuts for this problem.
Glad you all know more than the fish biologists
Go to an auto parts store and ask for a rust converter or remover. Lots of products
In case you didn't notice, he put the diesel in back in 2012. BTW, some people prefer i/o's to outboards, myself being one of them.
Awful long time to run it with no water
That's some fine eating.
That is how all my 270/400 reels done. Sorry, I use all braid, no topshot but Accurate says either 325yds of 50 braid or 300yds of 50 with 100yds...
Before I built myself a linewinder, I used to put a rod through the spool of line, lay it on a piece of scrap carpet, sit down and place my feet...
The problem with letting the line out behind the boat is all the salt you pack onto the spool. I've done it in an emergency but don't like it. To...
A Daiwa 900h is a better reel than the Penn 9/0, just saying.
First of all, which sport fishing place did you go to? There are more than one. The electric reels etc are for the tourist red snapper fishing and...
You don't want to let a green one in your boat. It will destroy it. When hooked, they have a tendency to swim up to your boat to see what is going...
You do know that it's illegal to use a marine VHF on land without a station license.
Might have better luck in the Classifieds.
I'm from TX so we call them ling too
I believe they are talking about a different fish called a ling, a.k.a., ling cod,
not what we call ling and what you pictured.
Talk to Basil at BHPtackle.com. He does something similar on his swordfish leaders.
FYI, the Jupiter Inlet is on the Atlantic, not the Gulf. Much worse.
It works. the vertical surface shouldn't be a problem. Just follow the instructions.
Just use 5200 Debonder
The Jupiter inlet can be a real hairy bitch, especially with a tropical storm right offshore, as was the case here. As for the person questioning...
Just a cautionary tale. My first time surf fishing, I dunked a Mitchel 300. I knew I needed to clean it but I waited 4 days. At the end of the 4...
Mine have always had Cal's grease under the reel seat. Sort of tan.
I fish my 400 on a OTI 7'6" popping rod.
If it is the right part, offer them about 1/2 for it. They are reel good about coming down in price. They also have a single "B" gear.
If you are throwing poppers, why not buy a real popping rod?
Google "hand gaff"...
That's thermal insulation, not sound insulation. Different stuff
My favorite is "Chilean Sea Bass", not from Chile and not a sea bass. BTW, it is my understanding that the only fish that can legally be called...
I haven't noticed that lever drags have backplay in particular. Backplay mostly depend on what type of anti-reverse system the reel has. If a reel...
Don't really know but on a car, if you bust that diaphragm your gas mileage goes to shit.
Right across the street
Plano has always been high and the Dallas Metroplex has one of the highest housing price increases in the nation, if not the highest. Probably...
For the record, the roofs are pitched fairly normal and have nothing to do with the wind. You will also find solar panels all over the place,...
OTI makes a nice one
How is this a rod building tutorial?
Gemeco (correct spelling) used to have some cable adapters for just this scenario. BTW, Gemeco is wholesale only.
Knots and levelwinds don't always mix well, unless you keep the knot off of the reel when casting.
You appear to have the same pump as the OP
If I remember correctly, any handle that fits a Jigmaster will fit that reel, so the selection is enormous. Look on alantani.com.
Don't know where you get your info but over the years I've seen many more broken OB's than I/O's. Do your maintenance and I/O's are fine. Cheaper...
I have all 3 Texas Tackle and a set of HPA's. The TT's are good and fit in your pocket, though the XL ones have trouble gripping the ring to spin...
From the add at the gpsstore:
Each Raymarine DragonFly 5 PRO comes with:Dragonfly 5 PRO with Navionics Plus Mapping, Locking Collar, Pivot Ball,...
I don't think I would like anything like that in my "bulge". It's too sensitive.
In the Gulf of Mexico, a full moon is thought to scatter the bait. The dark of the moon seems to concentrate the bait around the platforms we...
For popping you really need a popping rod, not some fast taper rod. Totally different actions.
From the TP&WD web site:
Based on a U.S. Food and Drug Administration advisory, the Texas Department of State Health Services is advising...
Why not just send it back and find out what's wrong?
Here in the Gulf of Mexico, the Halco Max 130 is pretty much the go to lure.
Accurate doesn't show to make a DX2-50. They show the Dx2-600 to be the biggest.
Have you looked at the Boss 30 or 30N? I use a Dawg 600N in the GOM with good results.
Russ, Yes, I've fished the Scat Cat and it has a lot of good things to say for it. The bunks are fairly nice and the fact that they only take...
Russ, What boat are you looking at that only allows 3 setups? I know that Fisherman's Wharf doesn't have any restrictions like that. Personally, I...
That rod doesn't seem to be a popping rod. It's listed everywhere as a jigging rod, though it's a little long for my taste. You would be better...
PE =polyethylene, i.e. spectra or Dyneema. PE line classes are by the diameter of the line and not breaking strength. Vertical or Japanese...
Yes they did
The Saragosa is a proven tuna reel in the Gulf of Mexico.
What kind of marine electronics are these?
I'm not sure I would like to sit in front of that radar and get microwaved.
According to the Accurate web site it's 26 lbs for the 600n and 24 for the 500
All the WiFi SONAR's that I know of still have a screen. Using the phone is just extra like in a tower or the back of the boat. I really don't see...
The Halco Max 130's are a favorite for YFT off TX
I call BS on this statement. Texas reinstated the yearly license (Sept 1 through Aug 31) because license sales fell off with the 12 mo license....
There's 2 of them?
Airmar makes some adapter cables. Maybe they have one for your scenario.
Look at post 3, you were post 4.
The 450H Daiwa is in no way equivalent to the US Senator US113w. Totally different reels. The 450H is equivalent to the older 113HLW.
I think the OP is correct and not just with snells. Circle hooks are required for a lot of fish in the Gulf of Mexico and many bottom rigs are...
Luhr Jensen doesn't list anything over 2 1/2 oz anymore. They haven't made the 7 oz for years, so I guess you are stuck with knockoff's.
Yes, you will have to take the reel completely apart. In order to do the handle, it has to be aluminum.
There isn't any electricity in the water and they are only powered when the tabs are moved. They are sealed and waterproof. I like Lenco's.
They didn't. They just renamed it the 400. The 197 is the 400N
For drag, as much as you can stand.
Something to remember: having two new batteries doesn't mean the voltage is good at the sonar. It still looks like you are having transducer...
I don't know of one that will fit a 2" gauge hole, But for stand alone, I highly recommend a Floscan. They do have a meter that includes a tach...
As several have said, the 2 piece popping rods are sweet. They are butt joints, meaning the joint is right at the end of the fore grip, which is...
Actually, I would go to 360tuna.com . Not much at tuna360.com
It's only a 500W sounder at best. Also, you don't say which transducer you are using. Doesn't sound too disappointing to me.
Coming at you!
If you have them left, I'll take 2 sets. Let me know the PayPal ID and I will send the money.
The OTI stuff is great. I have several of their rods, lots of their assist hooks and some of their lures.
When to use hollow braid? IMO, whenever possible. Why have knots if not needed.
It looks like there is still washers in the main gear. Make sure all the old washers are out of the gear.
"Is it worth converting to electronic and getting rid of the points?"
The B164 is a 1KW transducer as opposed to the B744v 's 600W. If you are in deeper water, the 1K will out perform the 600W. The B164 has 3...
Maybe you are just tall.
In Galveston (Houston area), you have two main partyboat operations, Galveston Party Boats and Williams Party boats, plus a bunch of 6 pack...
I'm with hucklongfin. I grease all my reels including my Avets and anyone that says they aren't "designed" for it doesn't know much about reels....
AYBC standards are for boats, not trailers
In the Gulf of Mexico, the Halco Max 130 is the hot number with the Shibuki clones such as the OTI Maguroni a close second for tuna.
To me, a "recreational trawler" is something like a Grand Banks. You are picturing a commercial type head boat. Quite a difference
Same here. It was a bit fiddley but it fit with no rubbing
Have you thought about putting these in the Classifieds?
What kind of tutorial is this?
I believe he is making a derogatory reference about parabolic rods, i.e., a "rubber jigging rod". They have plenty of backbone, just different...
Around my neck of the woods, they will often throw a piece this small in with another job and charge little or nothing. BTW, the stripping is a...
What's the reel behind the black 197?
My question is: Why should a braid line rating be different from mono? Line is line. you still don't want to exceed the maximum drag rating. for...
Don't use FlexCote on the whole blank, just use it on the guide wraps (if you have to use it. I prefer Diamond II). If you have to coat a whole...
I have also found on some rods that this is caused by an air lock, so to speak. The person that said to drill a hole in the butt cap was on the...
diseasedscrotum has it right. The behind the knees trick can generate a lot of force. Wrapping rubber bands around the rod also helps with getting...
FSR (Fiberglass Stain Remover) works well also
Probably a good idea to post this in the classifieds.
Pro Challenger has a SS gear sleeve for that reel that has 2 extra teeth that does the same thing....
"Sexton and a compass. Time to go very old school"
You want him to take a person who maintains church buildings along? Personally, I'd rather...
"Yes the 400 series are the same as the 500 series and both can be narrowd, but you'll have a hard time finding the Tib narrow kit."
Why would you...
Black works well
If you build it out of fiberglass, I would build it as an extension of the hull and not as a bracket. Like a new transom. Much stronger that way...
Also available from ROSCO (in quantity):
I need a box of 1 lb cod sinkers when you have them. Thanks
"I am guessing you are in Florida? Not sure this would work in CA."
He shows to be in NC. Why do you think it wouldn't work in CA?
First, someone has to make the upgrades. I've personally never seen any for 4 stroke outboards. Second, high output cams are the opposite of what...
For the Gulf of Mexico it would work but seems like overkill for 5-30lb blackfin. For some reason, jigging doesn't seem to get that many YFT off...
It would be nice with 6BTA's in it
"Wrong. Crevalles are in the Pacific as well. Throughout Mex"
Wrong. The Pacific Crevalle Jack is a different species, (Caranx caninus) vs the...
"Gt and Ulua are the same fish. Jack Crevalle are not. Crevalles are good for ceviche at best."
If you are desperate for ceviche, and yes, the...
The 197/400N is a narrow 400 sized reel. The bv-300 is a smaller, 300 sized reel. The Valiant weighs 9.9 oz, the 197/400N weighs 18oz. the...
Just Google "surf lure bag" and you will find a bunch of bags that will work.
What gear ratio is the 197?
Scold is Jon Vadney
kenstevens1 said: ↑
PE numbers relate to drag. PE2 is twenty lbs drag. Parabolic is what jiggers look for. Trevela , hopper , major craft , black...
I pay no attention to line ratings on vertical jigging rods, the lure weight and drag rating are the important. things. BTW, why should a rod have...
Really like my 7'6" 40-60 a lot. Also have a 60-80 I use and a 8' 40-60 that I need to build.
I'd like to know where they got there figures, such as " Most of the plastic rings that hold those cans together end up in the ocean." and "Each...
No mechanism inside, it's your thumb that controls the line on that reel
If you use your NOSE to syphon gas, doesn't that mess up your sinus's.
You don't want to add more alcohol to your fuel. It already has too much. Alcohol in fuel can cause many problems.
Probably have better luck in the Classifieds.
Nice reels and a great deal but way over kill for gulf bft. They only get about 30+ pounds and albacore in the gulf are rare. Some what over kill...
And they have bigger Bluefin tuna
That 113 only has a 2:1 gear ratio and jigmaster sized drags. Definitely not a 40-50 lb reel
You need to look up tying a PR knot. It's not really a knot per se. Has nothing to do with confidence or helping to tie the knot. It is necessary...
The Home Depot gloves I use aren't heavy at all. They are very lite weight. I fish in Texas summers at 100+ degrees at times, so heavy doesn't work.
Home Depot gloves, 3 pr for $10
Were you running the Furuno at the same time as the Simrad?
That appears to be the complete FUel PUmp
Channels 24 through 28 and Channels 84 through 88 - Are reserved for Marine Operator communications for the purpose of sending or receiving...
I like this, most of us fish within close proximity to the US border. The farthest south I have fished in my boat is maybe 70...
MMSI and the operators permit are two different things. MMSI is only required for DSC and is free. No license is required to operate a VHF, unless...
Have you tried the Classified section?
That link to Tackle Warehouse shows Oct 5
I believe Jerry Brown recommends 10# of pressure.
I, personally, have never seen a boat ramp, free or otherwise, with wash down facilities, and don't expect to. We just head to the nearest pay car...
I disagree. I was always told and do believe they are called wind on leaders because you can wind them through the guides with no hardware or...
Whatever cranks your tractor
A vessel must measure at least five net tons and, with the exception of certain oil spill response vessels, must be wholly owned by a citizen of...
The Bees Knees works great. I used one to build a line winder machine, using some Sato parts and a 1/2" drill. I recommend them.
30# drag is probably more than you will be able to handle. You state " There are huge fishes out there over 100lbs and it kind of seems that 30lbs...
Try the classified ads on this board. Probably have better luck.
I see 2 boats and a jet ski. I read it that the jet ski is $6700. The first boat is interesting. It appears to be an inboard. (not I/O)
How about a Penn Mag 10 level wind. $40 on ebay and tough.
One important thing to remember:
Radio Watchkeeping Regulations
In general, any vessel equipped with a VHF marine radiotelephone (whether...
Will you ship?
I was told that if you hold the dropper loop in your hand and run your hand down the dropper loop, you can see the hook move into place to hook...
On circle hooks, on a dropper loop type setup, I've been told by commercial fishermen to always go front to back. They claim it ups the hookup ratio.
You would probably have better luck posting on one of the Texas boards such as texasfishingforum,com or 2coolfishing.com
You say "seems drag loostens up during fight". Have you actually checked it with a scale to verify it?
For everybody saying red snapper are an east coast fish, there aren't many there. In fact, there is no season for them and you can't keep them on...
Have you tried the Fishing Classifieds? Probably work better.
Carbontex and Penn HT-100 drag material are basically the same thing. If the Penn washers fit, use them.
I can't help with the other as I don't...
You guys are lucky. In the Gulf of Mexico, no fish can be filleted. Everything has to be head and tail attached until landed at the dock.
I love the Saltiga Boat Braid but it depends on what you are doing with it. It's for vertical jigging and bottom fishing, so you know what depth...
Funny, Allmand boats have been around for a long time.
You'd do a lot better posting on 2coolfishing.com , texasfishing forum.com , or 360tuna.com. They are TX boards, except maybe 360tuna.
You're just up the road from Galveston, where the party boats are.
GMT? Greenwich Mean Time?
No, keeping all of mine for now
The 197 is different from the 400's. It is a narrow version of the 400/270. If narrow is what you want, the equivalent is a 400N. The Boss Magnum...
If the trailer lights are running the battery down, then there is something wrong with the lights.
On the Gulf Coast, bean bags are a staple in offshore boats. Put them in the back, sit/lay down and go. When you start fishing, put them on the...
Hey Brice, have you got any 25-40, either an Extreme(preferred) or Sniper set up for conventional for sale?
Not trying to be an asshole, but the frame is made to match a TR1000 Charter Special. They also made a frame to fit the TR2000 Charter Special....
It's a Charter Special, not a TLD5. Different reels.
Ants work good on fish jaws.
Personally I would send or take it to Accurate.
Home Depot 3 pair for $10
If you can find it, Snappy Teak Nu is one of the better teak cleaners.
I would say it is fine where it is.
They are asking for the diameter of the knob. 47mm= 1.85 in, 44mm = 1.73, etc. I personally like these handles. The 50mm is very comfortable....
The answer is you need to buy the Newell bars for a squidder. The bars are made for a squidder, not a Newell reel. I bought some from The Rusty...
All the time. Just watch the current. Sometimes it makes getting back to the boat a bit difficult.
Water proof marine grease such as Yamaha marine grease
It's best to find the source of the leak, but that can be a problem at times. I had a leak on the port side of my cabin one time that I finally...
Legally you cannot set a certain amount or make it a requirement to go with you, or then you would need a license. If someone doesn't voluntarily...
Splice it instead of a knot. End of problem. This is not uncommon where I come from, BTW.
Great answer for a question about an Accurate reel.
It looks like the whole handle will interchange as they have the same gear stud. Penn Parts doesn't list the handle types that interchange for...
Well, the Seeker web site shows all the 970-7 (Black steel, Super Seeker and Black Classic) as 20-30. The 670 is shown as 25-40. These are all...
I'm looking for some info on a rod I have. It's supposed to be a Seeker blank and 20-50 lb rod. It's a dark green blank. Could this be a 970-7?...
up, up, and away
I've got a black 541, but thanks
BTW, John Tuttle did a tear down on the Fury here:...
Go to pennparts.com and they have a page that shows which Penn handles interchange.
I have absolutely no problems with my Accurates (17 and counting) but that's another story. I wonder where all this "high maintenance" talk...
As the title says, looking for a black 545
How much for the 197 2 speed?
A 270 is a bit too wide for a jigging reel. Try looking at a 870N or 500N. I use either a 870N or a 665NN myself.
You need to go to either 360tuna.com or 2coolfishing.com and ask there. Even texasfishingforum.com might have some info. Depending on the...
Is the Pro gear really a Yellowtail Special, i.e., it has a clicker, or is it just a 454?
Don't worry about the guides, worry about the braid. The sand can and will abrade the braid. Use a longer leader to keep the braid up off of the sand.
or use a slick butt
They don't run trips as 3/4 day or overnight, they tend to run as so many hours, and they vary , depending on what port you sail out of. The...
You do realize that both these kits come from New Zealand don't you. Imagine the shipping on the parts of a whole boat!
Don't do it! I lost rods out of the cabin(locked of course). If they want them they will find a way. All my gear that I care about is in my house,...
I have a question that probably has an easy answer, but I'm not sure of what it is. What is the best way or the best tool to measure Rod Bond...
Try 360tuna.com or the 2coolfishing.com Bluewater board
What's wrong with the handles you have?
I love my set and they aren't really noisy, in fact I didn't notice much difference from the stock gears, but then, anti reverse dogs clicking...
NO-OX-ID A Special compound. Have used it for years on contacts, battery terminals, bus bars, etc. It's made just for this. I noticed you can get...
I certainly wouldn't put it on one of the lifting strakes like it is. Made that mistake.
I got one to jump in the boat one time by constantly taking a small leadhead jig away from him.
Not that I can tell
The reel in the pictures appears to be a single speed, not a two speed.
make sure you get a cup to cup crimper and not a point to cup crimper. Some good info here:...
If they have the parts, which may be problematic, you would need a gear set, a new right side plate and dust cover for sure. It would probably be...
Color doesn't matter with poppers, it's the action.
The rod is more important than the reel as it does most of the work in popping.
I just wear a Jaws fighting belt without the plate all the time. Helps a bunch and if I need the plate, it only takes seconds to attach.
You have to remember, AJ's can go over 100 lbs and love to drag you into what ever is handy. When fishing near rigs, a 50w with 100lb + line is...
If it was engine interference it wouldn't have anything to with getting on plane. BTW, they make filters for electrical interference. Very...
Every boat I ever owned had an external speaker for this reason. I haven't seen a newer VHF that didn't have an external speaker jack. Radio Shack...
This is the Boat Electronics section. Try Boating Discussion section.
You are in the Accurate reel forum. Try one of the boating forums
If it's for a 114H, it's $11 at Pennparts.com.
I wonder about these statements about "wrong Forum " or "this isn't a report. The title of the forum is "Boating-Electronics, Engines, patch work,...
And everywhere else. That's the way Accurates are priced
That is the arm from a BX. They have a longer arm for the older reels with two holes in them. That's the one you want. It shows to be a B-1802....
The main reason soldering isn't recommended on a boat is it creates a rigid spot that can fail due to all the vibration in a boat, i.e., the wire...
Just remember that Penn's current drag washers are basically the same as carbontex. The Penn stock 5+1 drag stack is a large upgrade over the...
Digital or the good Shakespeare's. Go 8' if possible. VHF is line of sight, so the higher the antenna, the better the range. I always run a 2' or...
Some are 4.6:1 and some are 4:1, depending on the age of the reel. Still need the gear ratio.
Red34 is in Corpus Christi, TX. He is OTI.
Nice to see something original, like maybe in 1920.
Nothing I care about is in the garage. Too easy to break into and too frigging hot. Air temp over 100 today and the garage was much, much hotter.
what gear ratio? EDIT: never mind, I see the X
Why not send it to Accurate? BTW, the two IAR bearings aren't for low and hi. It was a way to get a stronger IAR.
Great fishing in the Gulf. Port A, Freeport, and Galveston best bet for headboat trips. Galveston Party boats has a 30 hr floater (tuna) trip in...
The one on the right (the Boss Magnum)is the newest. The one on the left you can't get many parts for unless it has been upgraded. If it has been...
They probably need the room for the ARB
Why not send it to Accurate?
I believe the fish report boards are higher up, except for the West Marine board. This one is subtitled "Fishing Tips, Questions, How To's,...
Actually the Pro Gear Yellowtail Special is a 454 with a clicker. The 440 is the size of a Penn 113H. Yellowtail Specials are narrower.
What about Divinycell or some of the other core material?
Another thought is to wrap with regular thread then cover with a carbon sleeve. Try http://www.sollercomposites.com/
Go to alantani.com and look around. you will find several threads on servicing ARB's. Basically you clean them and use Corrosion X on them.
Doesn't your seeker have a warranty?
I used to use a piece of carpet on the floor. Put a rod of some sort through the spool, set the spool on the carpet and place your feet on the rod...
Most likely it has 330 hp 454's. Good engines, lots of torque.
That looks pretty much the same as the shifter on a TLD20II/30II.
Shimano American Corp.
Irvine, CA 92618
Saltiga Boat Braid doesn't come in 60 lb. It comes in 55 and 70.
Have you tried Accurate?
No, the whole Gulf of Mexico requires all fish to have head and fins intact, except for bait and oceanic migratory species, through landing. It's...
Most people don't yoyo per se. They tend to speed or vertical style jig. One strange thing is jigging catches blackfin but not many YFT. Popping,...
Tiburon has lots of them.
Lake Fork out side of Dallas. South of Sulphur Springs on I-30, which is the road to Little Rock. A known big bass lake
What gear ratios?
If you need to remove 5200 you can use a debonder on it
The states, such as TX, that went to a 1 yr from date of purchase type license have found that they lost money compared to having all license...
A lot of shops will either loan or rent you that tool. Call a Mercury dealer
Icom, second choice, Icom
3M Adhesive Remover
Has nothing to do with salt, has to do with proper radio usage.
It's in use everywhere along with Pan Pan
Kingfish are from a mile or so to at least 80mi. Blackfin from 60 or so to 120+, depending on time of year and what the shrimpers are doing. It...
I personally like kingfish but the bigger ones can contain higher levels of mercury. They can be difficult to clean also, depending on how you do...
Not really. Kingfish are fun but a lot of people don't like to eat them. We have all kinds of bottom fish, including multiple types of grouper and...
You can always drift a bait for kings or an occasional mahi. Usually works best at the stern, which is another reason to make reservations early....
In July, the head boats in Galveston won't be running any tuna trips but they will be running 12 hr bottom fishing trips almost every day. The two...
It will have to be Galveston or Freeport, if offshore. What sort of fishing do you have in mind?
PacBay BBHG Boat Guides, or Forecast BSULG - Casting Guides
Jigging (vertical style) rods tend to be around 5 ft, give or take 6 in. Popping rods tend to be 7 1/2 ft to 8 1/2 ft . You do the math.
I'll take the Pro Gear 545. Sent you a PM.
what color is the 545?
I don't know who you've been hanging out with, but I've lived in TX all my life and I know what every one of those things are. I own and use...
To upgrade a BX to a DPX takes a new side plate
There is at least one that doesn't but I forget which one it is. I think it was a Mak
Closer to 100mi off TX at times
Not just FL, but the whole gulf Coast and a lot of the east coast. The distance to travel has a lot to do with...
Cuts the time on long runs, also those are big boats.
Yes and no. The Dauntless has 2 dogs plus a stainless ARB, the Bx2 only has an ARB that may not be stainless, depending on the age of the reel....
Why do you think 60 lb is max for the reel? You could load 150 lb if you wanted. Mabe not the best idea but you could do it.
Sounds like a 454. Mine isn't marked either.
As far as I know, the Pacifica line only came in silver. Someone correct me if I am wrong.
What you have is probably an 870HC, and yes, it is a little newer than the 4.6:1 version, but functionally the same. It was replaced by the...
Actually the Penn 114 has a 2:1 ratio and the 114H has a 2.8:1 ratio. The Daiwa 600H has a 3.1:1 ratio. The Penn 113H (4/0) has a 3.25:1 ratio....
It certainly looks nice, but I wonder about the claimed 40+ mph with twin 188hp Volvos
N =Narrow, D= Dawg, i.e., triple dog side plate. It is probably smaller than your Penn, and since it is a narrow, won't hold as much line. It...
Humminbird makes a switch
From the eCFR 47 (Electronic Code of Federal Regulations)
§80.310 Watch required by voluntary vessels.
Voluntary vessels not equipped with DSC...
They are made that way. They are called Microwave guides, I believe, though those on that rod look a little different from the Microwaves.
Just remember, if you have a vhf and it is turned on, you must also maintain a watch on Ch 16
There used to be a bracket called the GS Bracket (or Get Strapped Bracket) but I don't think they are made anymore. Have a look at the BX2-30N. It...
Sleeving Accurate's seems to help. Accurate has kit for $20 or they will do it for you. See this post:...
Instead of acetone, try 3M Adhesive Remover. Works much faster....
I did one that way and it worked out fine. Screwed the light to the Bimini frame and ran the wires inside the frame, exiting near the bimini...
You mean these?
Freeman, any Freeman.
More reading comprehension problems. I suggest you reread the original post. His nephew bought the bait, not the OP, so it wasn't noticed immediately.
Try chicken fried tuna with jalapeno gravy
Only the color, otherwise identical.
As far as I know, the Torque 300 hasn't been made in quite awhile (2010), at least the star drags haven't. Otherwise, do you want a 6.0:1 gear...
What's the gear ratio?
No, Duracoat is a firearm finish.
It's cast aluminum and won't anodize well. Powder coat or duracoat are probably the best bets.
Buy the BX2 and have Accurate upgrade it, if the price is right. I believe the upgrade was around $150.
I'll guarantee you Bret Holden knows what a sword fights like. If he says it's a sword, I'd put money on it.
They list about 10 different models for diesels on their web site. ???
If it is a single speed, there is a longer 2 hole handle arm available, the B-1802, for $40. I change all mine to this one. There is a tbar, the...
I don't believe you should connect the green wire to the battery return bus. There is a difference between a battery return bus (mistakenly called...
He means that you make sure the lever is in the "free spool" position before you place the cam in. The cam is the brass looking thing with the...
The second link is for the saltwater package
If you are using JB spectra, the 100lb is actually smaller than the 80lb. Just a thought.
All I see is a big blank page, no videos. ?????
No one says we have a low population. NMFS says we catch too many.
Taking in to consideration where the rods were built, are you even sure that they were Alps guides?
The crew restricts the number of rods being trolled, and you rotate if there are more want to be trollers than spots. Also, boats like the Scat...
What weight line does the MK-C-701XH fish comfortably?
Accurate has their PitBull clamp just for this problem ( http://store.accuratefishing.com/index.php?crn=222&rn=454&action=show_detail ) or you can...
For party boats, you have Dolphin Docks ( http://dolphindocks.com/ , Deepsea Headquarters ( http://www.deepseaheadquarters.com/ ) and Fisherman's...
Have fun in Port A, right down Interstate 37 from San Antone
The link to add the DVD doesn't send you to PayPal checkout, it sends you to the PayPal home page. In other words, you can't add the DVD to your cart
Another problem on both sites. When you try to add the DVD to a cart, it sends you to a generic Paypal page, not your cart.
I think you are talking about Jigskinz.
Great reports on their use
Why would you take a Daiwa reel to Shimano?
One thing to look out for. Some OMC stringer drive boats didn't have a strong enough transom...
At one time there was an adapter plate available to convert OMC stringer drive to Mercruiser, etc. I don't know if they are still available, or if...
Dream on. I'm sure we overfished or limit in 9 days and will have an even shorter season next time. All according to NMFS, of course.
Costco $249 for the 65qt
I had a Chris that would do that and found that there was a lot of wear and slop in the rudder. Changed the rudder and rudder stuffing box out and...
The only thing I would change is that the ARB is somewhat optional on the DPX2 reels. Originally they had them, then they didn't, but would put...
Tour Star has had them for quite some time and says they are made by WINN. American Rodsmith announced them on their rods in 2010 and says they...
If it only happens when you put the engine in gear, it sounds like turbulence.
You would have better luck asking this question on www.2coolfishing.com on the Bluewater forum. It depends a lot on which port you fish out of....
I need a set
Should have kept the Yellowfin
That's just his style of fishing and he is very good at it. He likes to point the rod at the fish and keep the butt under his arm. He claims it is...
These in stainless steel:
Another fish finder on the same frequency can cause all kinds of weird things
Why would you put a knot in hollow braid?
I need some also
Not trying to be funny at all. They would probably use stainless. Unless you took extra care at that spot, it would be a place for potential...
Would you rather have dissimilar metals causing galvanic corrosion in salt water? I vote yes for the plastic on a piece that has no stress.
No better hull than a 233 Formula. I have a 67 twin I/O and love it. I've never heard that they ride better with an outboard, in fact, just the...
What blank, if I may ask?
Most Kenners are considered bay boats. Great bay boats but are now owned by Tracker Marine, I believe
Not true. Nobody fishes for them but they are out there. I've seen one caught out of Galveston.
I believe the one for the 50 with the gearbox rotated was made by Accurate
That schematic gives you both ends of the cable. Just make sure you have the one for the Lowrance HDS7 Gen 2
There is one on ebay
Brice, Will you be at the Holder show in Houston and if so, will you be bringing any blanks? I'm looking at building or buying a 40-60...
Have a look at these. Very nice (but pricey)
The only problem is this is in the Atlantic, and not rockfish
"Icelandic fishing in the north Atlantic. Catching a big catch of fish, on a...
Tapped into the side of the block like that, I'll bet it is an oil pressure set up.
The one on the left looks like the pressure sensor. The one on the right with the wires looks like an low oil pressure alarm sending unit, aka a...
There are two AR bearings in a Boss Magnum and they need to be pressed in. Depending on how handy you are, it might be easier to send it to...
Out of Galveston, I prefer Galveston Party Boats to the Capt John for several reasons, one being they seem to catch more YFT than the Capt John....
I don't use Power Pro but I really like the Daiwa Boat Braid and the Suffix Performance Indicator
Yes, you can. Check here:
Avet sells an optional reel seat for just that reason. It's for the trigger reels seats and cost $20
The 15/30 is the narrow version of the 20/40. They share all the same parts except the frame and spool. They both have a 5.2:1 gear ratio. I don't...
You probably should strive for it.
How about this:
The Boss Magnums are still OK, it is the original Boss that has the AR problem. You can always switch the sideplate to a Boss Magnum and fix the...
You can always try this:
Boss Magnum reels
BX TwinDrag Reels
- - - Updated - - -
If it's a 2 speed, it's not an XC, it is a B2-870. The X designation is only for single speed reels
Separate names with a comma.