Photos added, bump
Sold pending funds right now. Thanks!
Looking to sell a 2005 4runner v8. This car has been extremely reliable and only selling because I've replaced it with a 4x4 with twice the...
These 2uzfe motors are essentially bullet proof!! As long as the the 90k maintenance is done, its essential oil change every 5k and drive them...
I use a USB-800H-C and komodo 463 as my primary surface iron setup. I'm able to cast the shit out a tady 45 or similar. Also enjoy the light...
Got a good condition Curado 200e7 that i no longer use. Spooled with 65# jbraid. Pick up in Glendale or El Monte. Will also ship on your dime....
Selling a TCU-LEXA clamp. Pick up in Glendale/El Monte or ship on your dime. $30
It will fit
Thanks for the response. Ramp wasn't bad at all, was able to launch and retrieve without any issues. Was able to score some lobsters as well!
Does anyone know if South Shore ramp out of long beach is useable after last week big storm? Trying to head out tonight and wondering...
Cad it up to your liking or have a friend do it and send it out for machining!!
Plenty of parking at south shore with open restrooms. They have two free wash down area.
Extremely easy to solo launch and the gate will take...
For anyone who is interested in getting upgrading the power handles for the Komodo, look into the Ccrtez handle! You can get the handle from...
Power handles sold
I called the office and place an order over the phone. Give them a call, they are extremely helpful.
Got a Komodo 463 factory paddle handles for sale $10
I contacted Okuma today and the new handles are not in. Tired of waiting so ended up getting two cortez 10 handles.
The 30 will connect to the 10 through BT. Sorry, I forgot I had this posted up on here. Unit is now sold.
Looking to buy a couple inexpensive spinning reels. Ideally would like the Daiwa BG 2500 and 4000 but open to others as well.
Got a used Okuma Komodo 463p that i would like to trade for a Tranx400 power handle. Komodo is in great condition and was recently serviced and...
Bump, price drop
Brand new nomad rolling deck bag (ANT-TRS). Ended up going with a smaller bag. $115 pick up in Glendale or El Monte
Got a brand new sena 30k communication system. Bought the dual pack as my buddy was going to split it with me but that didn’t happen. $sold
Sounds like you guys have it dialed in, great job. Any advices for the novices out there? Bait/Depth?
Looking to buy some ambush (or similar) hoop nets. Let me know what you have and how much. Thanks!
Have the same issue on a brand new mak50. With the way the jumbo have been biting. I’m reluctant to send it in.
Mak16/Jbraid 100# - 525 yards
Mak50/Jbraid 150# - 740 yards
Got one, trade for a 809xhj?
Tranx gone, bump!!
Been tying the FG knot with 4 half hitch knots without failure. As someone suggested up there, cinch the braid down after one or two half hitch....
It’s only Card
Would you guy say the 4x is better for casting?? I've been using the x8 for surface iron and I find my casting is suffering. Seems to be too...
bump, interested in trading for Makaira and Talica 2 speeds as well.
to the top
Which one would you like little man?? Put that shit in my hand. If that money doesn't show. Then you owe me owe me owe
It was nice meeting you! I realized you gave me an extra $10 on top of our agreement. Send me your Venmo or Paypal and I'll send it back to you.
Hey, how much shipped for just the Okuma Komodo?
It is a Long Beach blank. PM with a number to reach.
Looking for a tiburon lexa clamp (tcu-lexa). Or if you have something that will fit the Komodo 471.
black steel, 20-40
Bump, Gloomis rod is sold.
Have the following reels for sale. Would consider trading for makaira and talica 2 speeds.. Pick up in El Monte or Glendale. Will ship on your...
For sale is the following rods. Pick up in El Monte or Glendale.
1) Custom deckhand Seeker Black Steel G6480 (20-40) with SIC guides - used in...
Brand new Power Pro #100 in 500 yard spool in vermillion red. Sold
Pick up in Glendale or El Monte, will ship on your dime too.
Bump, spool has been filled 3/4 with #65 power pro super 8. Make an offer
Bump, G6480 still for sale
No way in hell would you need to remove the motor to get to the trim unit. Also don't think you need a new pump if you are still able to use the...
Reduced the prices, bump
Got a SS quicksilver 14.5x17 3 blade with Yamaha hug spindle if you're interested. A little pounding and you'll be back in business. $80 located...
Bump, FATHOM still for sale
Shipping isn't out of the question
Take a look at the waterproof LED light sticks. The only draw back is the potential risk of leaking. Lubing of the o-ring definitely helps but...
Nice boat!! not in the market for another vessel but what type of diving gear are you going to be selling?
Tam is right, only the captain will only be out of the elements. Shame on you for not thinking about your hoes!
You might want to check out Okuma's new PCH rod as well! Great rods and priced competitively.
Where are you located?
Bump, make a reasonable offer
We like em double Ds!!!!!
What a great transformation, good job on the restoration/upgrade. I bet it hauls with the 150 hanging in the back! All it needs is the bait tank...
Basically the same tool you would buy from Yamaha and other manufacture. I had it machined for cost saving reasons.
Send you a pm
If you have a tool that utilizes a ratchet wrench for removal. Do yourself a favor and put a impact on it for removal. That cap comes off like...
Bump, Lexa and 364 have been sold
I'm using my personal laptop with windows 7 64 bits. YDS 1.33 is compactable with the following window base OS: XP, Vista, 7 and 8. As for...
I could help you with that, but I'm in LA. However you can get a yamaha yds 1.33 from eBay for $60. I believe it will be able to poop out what...
Yes it's still available
Added a couple more reels
Located in El Monte/Glendale. Will also ship if needed.
Selling the following reels below. Pick up in El Monte/Glendale or ship on your dime.
1)Lexa 400hs, used with more than half a spool of #65...
Got a Boone medium kill bag that is a little to big for me needs. Bag is 20x65" and has been used a hand full of time. It is in great condition...
Glad you were able to mustard a few!
Its a long shot, but I lost one a few weeks back. Promar ambush with a 4" plastic green/white drain grate...
Congrats on the butt! Great descriptive report as well, took me away from the office for a few minutes!
Decided to hoop inside the harbor with some family family members. First set in around 630pm at White Island with fresh salmon bones as bait....
It is still available
Interested in shipping?
Bump, make an offer
Long shot but looking for a curado paddle handle. Let me know if you have one.
Uploaded more photos
Sure, anything particular you want to see?
Thanks for the local report!
Great condition cooler seat with reversible back rest. Foot print on the seat is roughly 36"X16". Asking $200
Bump, make me an offer
Nicely done Tony!!
I wiped any excess grease in that general area. Also took apart the actually spool bearing and cleaned with break cleaner and then relube with a...
Thanks for the reply, looks like I missed show!!
Hey guys, looking to get my open water cert within the next few month and was wondering if their is any place you would recommend in the LA/OC...
Bump, back up for sale
The rod is pending at the moment, I will let you know if anything changes
Hey Danny, left you an email
It is very rare that I go south
El Monte or Glendale
I have a sheet of 3/4" hdpe 24"x48" that I will sell for $85
Hey guys, was wondering if anyone will be fishing next week in PV on the 19 and 20th and wouldn't mind having one more person. Booked a last...
As everyone recommended. Pull the lower unit off and replace all the seals. The cost of seals is about $35. I believe your lower unit has three...
Had me laughing for a second!! Bazinga
Bump, could use the money on motorcycle tires.
To the top
Back to the top!
Emailed you about the gf 800l
Interested in the resin/hardener if the deal doesn't go through
Dang, definitely something I needed yet your in SD. Very kind of you!
Great yoyo stick! Bump
Bump, G6465h is still for sale
Interested in just selling the leaning post? If so how much?
I will take it. Can pick up tomorrow as I work in Glendale
Does the height adjust?
6470 is pending
What's the measurement on it?
Have a couple good condition seeker black steel rod for sale. Pick up in Los Angeles area but will ship if needed.
1) Custom wrapped g6470 with...
Is it factory wrapped? If not got any photos?
What are you looking to trade for?
Photos are up now, bump
Photos are up, bump
Bump, will be at the Fred Hall today.
Those who are interested, I will also sell it for $130.
Have a good condition Penn senator 113 HL that I no longer need. Will sell for SOLD
Looking to trade a like new torque 30 in black with 4.8:1 gear. I am looking for a torque 25n star drag or 2 speed in similar condition. Thanks!
Looking to trade my great condition fathom 15 start drag for a similar condition 12 star drag. Will also sell for for $130.
Looking for a leaning post for my 18' center console. Please let me know what you have. Thanks
That smile is priceless!!
Bump, this reel is practically brand new!
Reel is pending at the moment
Still have the 12ii. Make me an offer or trade for some diving gear
I have one but I am in Los Angeles
Interested in trading for a trq30?
Ever make it up toward the la area?
Thanks for the input. I have seen these many times at Costco and always find myself contemplating on buying. My pride have always kept me from...
Way to go Cory and company! Haven't seen a report from you in awhile!
Caesar, now that sounds like a plan!!
This fucking sucks!! I hope your buddy recovers the boat. El Monte is my home town and I can honestly say this city's crime rate is no doubt...
I second the jerk shad and owner. Switched last year and that has become my bread and butter there.
I have a like new toro nacl 50 that I would like to sell. Reel is in pristine condition and was service by myself prior to storing. Loaded with...
No longer for sale. Thanks.
Way to to! Miss having time to just go out mid week!
Thanks for the advice Water, will think of something to keep them off.
All my sets were in roughly 40-50' of water.
Had a late start and did not drop the hoops until 745pm. First pull resulted a couple shorts and crabs. Had a seal hound us on the third set....
Good luck out there! Check out the green buoy area, had a lot of marks on my finder there. Also plenty of knock downs that did not stick....
For the half scoop, $30.
Just realized I posted today's date. Report was on 10/01!
Decided to take a personal day off and spend it on the water. Had a late start and did...
Great report and way to stick it out there!! They do look a bit deflated!
Talked to him last night. He had someone coming this morning.
Phenix 809h with a fathom 15.
I will take it!! I regret selling my previous aluminum!! My dad will love this one for sure!
Going to be fishing Thursday. Still debating to go north or south...
Cleaned the excess grease, free spool is just under a minute now. More than enough for what I need it for. Thanks!
I am not sure but I am sure there is fisherman out there that can do it effectively. For me I just bump the drag a bit more.
Long shot but i will take it if both party decides they don't want it.
If your Mercury is the same as my Yamaha F100. You sync the three carbs top one at a time to the bottom one.
Here is how I do mine. Each carb...
Would prefer a trade but make a reasonable offer if your interested. Please note the real is brand new and is filled with braid.
Edit original post. Looking for a fish finder unit
We had to work for the yellows on Saturday as well. Honestly at first it felt slow to me as well. It is hard to stay humble when the last two...
Reel is brand new and has been spooled with 500yrd of #65 Dawia j-braid. Looking to trade for a decent fish finder setup. Willing to put money on...
Made a new friend while fishing the 105, green buoy and 150. Went 3 for 6 on the yt slow trolling sardines on the 105.
Fishing locally tomorrow and need one person to fish with and help out with gas/bait and such. Give me a ring or text at 6265127o43.
I have a...
That is crazy! Looks like I will be adding a marauder to the spread!
It is crazy how everyone is hooked up around you and you cannot buy a bite!...
Was tempted to sell them back to you until I came to my senses. I will definitely use them again once this epic season is over. On another note,...
Kurt, I bought three of your loomis made Calcutta rods. My go to rod for fishing the smaller swimbait is the 815xfa. I have fished plenty of...
Thanks for the cables Kurt. Honestly looks like they will hold up in the environment.
Will take apart the spool assembly and see what is happening in there.
Nicely done guys! That sure made up for the bad recent trips!
Hey Stefan, no need for any more explanation. Thanks for the informative post.
Thanks for all the great input. Looks like I am too quick to pull the trigger when bit. I will apply and report back!
Had 5 bites and farmed 3. Hook used as 4/0 owner super mutu ringed.
Haha, thanks for pointing that shirt out.
Lots of different method here but all points to having the fish set the hook.
I was out this past week fishing for yt. Farmed 3 of them using...
No master baiter here, just wanted to know what the norm is. If three pass is a full scoop then it is what it is. Not shitting on the weak baits...
Okay I have always used j hooks but decided to give the circles a try this year. I am starting to feel like ptfe as I cannot get my hookups to...
Fished on my friends boat this past Saturday. Got to San Pedro bait barge around 610 with 12 boats ahead of us. While waiting in line shooting...
Reel has line in it and I am certain it clicks into free spool. Will look into the over greasing/lube
Look on the bright side Dat. Excuse to upgrade!!
Hey I have the 12 two speed. Brand new in box still. See link below
I agree that is more free spool than I will need. However my 15ld2 gets about 15 seconds of free spool.
Would like to be third in line!
It depends on your reel and perhaps the size of the bait. For me I am able to slow troll with the reel in free spool with the clicker on. I fish...
My name is Mark and I have some free time tomorrow and would love to get out tomorrow and fish. I am in the process of re-wiring my...
I am pretty sure this boat was sold.
Never had an issue with him or his business. I tip accordingly and occasionally pass over some "sandwiches". Just be mindful and not a obnoxious ass!
This is real bad but I am not surprised..
Looking to be purchasing some #6 wires from you within the next week. I still need to measure how many feet I will need. Any chance of...
Well written report! Looks like your boys are ready to pull on some yellows!
Have a brand new seeker black steel g670 for sale. Great 30lb rod that I have no use for. Pick up in the SGV or Glendale area. $170obo
You will be fine.
Thanks for the detailed report Cory. Even on a bad day you report and provide useful Intel. Not many people on here including myself report a bad...
Hard to beat a seeker black steel 6470!
Just looking for the handle, not the entire reel.
Last weekend i saw a marlin hooked up in that area as well.
Amazon has them for 115. Picked one up and 10 dollar shipping for next day shipping.
Nicely done on the local tails.
Thanks for your input guys. I will have to add another reel to the arsenal.
From the looks of those photo. Looks like you are running 4 of those 2 strokes!
Looking for a Lexa power handle. Let me know if you have one for sale. Thanks
Is there any issue connecting #65 braid to #60 FC? Typically I use the rp knot for braid to mono/FC.
Im referring to having more line with a lighter drag or having less line with a tighter drag. In this case, 65 backing with a top of 50 or 80...
Need some advice on what I should spool a Mak 15 reel with. Initially bought it to fly line #50 and bumping down the 10 to a #40 rig....
Thanks for the report. Hope the cuda are still around come Saturday. GoIng to take my nephew out fishing for his first time!
Way to get it done! We were not as fortune yesterday. Just missed it all haha.
Hey Corey, it was a pleasure hanging out and fishing with you. We didn't do much catching yesterday but it is part of the game. Till next time!
Not at the moment. I can snap some when I am back home.
5ii sold. 12ii still up for grabs. Willing to ship the reel on my dime.
Interested in the gun metal? Brand new Spoiled with 500yrd of briad
I have yet to fish the 25n but I been using the older trq200 loaded with braid on a g6480. I am starting to really like this setup for slinging...
Interested in a metaloid 12ii and cash on my side?
That 6480 is a killer rod!!
Bump, good seller
That is a negative ghost rider.
What's the pitch on the prop and any dings?
Both reels are brand new in the box still. Pick up in Glendale or El Monte. Can also shipped on your dime.
12ii - $280
5ii - Sold
Got a smx82mh in great really good condition. Where are you located?
Can't go wrong with the metaloid and the proteus rod is really nice for the money. I believe I can help you get the whole setup for about 410.
Hey Josh, I think I saw you guys. At one point you guys had a double going right? I was by myself on a kencraft cc.
Started the day around 6am at nachos making macs. Ended with only 6 for a good hour of trying. Grab a half scoop of pretty good dines from nacho...
Looking to purchase a kill bag. Let me know what you guys have. Thanks
Hey, nice reel you have. Just curious how big is this reel compared to the metaloid 5
Good job on the solo gaff!
Went fishing from 6am till 11am. Went 1 for 2 at the shoe.
Decided to fish solo today as my typical fishing buddies...
Interested in a brand new metaloid 12ii?
I have/had all three and fish them for bass once a week since they have been out and your occasional pelagic. Honestly you cannot go wrong with...
Thought you said no more yt for you this week! I am no longer fishing the 150 during the weekend. Way to much pressure and with my luck I have...
Good job on the local yellow. I am debating on whether to fish the 150 Saturday. Really don't want to deal with the crowd though!
Good job bud, glad you finally put one on board! Sucks about getting skunked but I feel a sense of accomplishment when I can put family and...
First or second generation?
Thanks for adding salt to the wound! I was waiting for the afternoon and then evening bite but had to leave to make it to the dodger game. Three...
That's awesome!! How was the crowd today?!
If memory serves me right, it is.
Sunset Aquatic out of Huntington harbor would be your best bet.
Davies is also doable but i just really don't think that ramp. Prefer a...
Good job out there. The ducky strikes again! I am envious of all you guys who can fish during the weekday! It is a total zoo out there during...
Great report and whoever took those photo deserve a slab of those yellows! Good job out there, decided to stay clear of the 150 parking lot and...
Congrats bud! Shouldn't have slept in today. Can't catch them at home.
Way to go on finding your own school of fish Josh! Going to try and get me some mañana!
Way to go out there bud. Looks like a nice local slug!
I tear the reel down and clean and re-grease everything beside what I list below with yamaha marine grease.
For the drag washer I use...
Between me and my cousin we have/had 7 Abu bait caster. All revo inshore and toro 50. Both nacl and first generation. Every single one had an...
Interested in a 6465h black steel. Rated 40(50)80.
What are you looking for exactly? Would you be interested in hoops (non conical)?
I believe this is the g16, rated for boats 28-33'. An overkill for me but might be interests in this if it fits my locker. OP, can you confirm...
All sold. Thanks
2012 ninja 650r? Great commuter bike!
Got too much iron earlier this season. $sold when you buy 6 or more.
1x blue and white
Mike, I'll give you 234 for it!! Hope all is well!
The jigs are pending tonight.
Interested in a torque 30 star drag?
Looking to trade my torque 30 star drag (black) in practically brand new condition for a lever drag two speed reel for #50. Can possibly add cash...
Have some iron that I have no use for. Most are ironman with a couple tady, salas and others. $Sold picked up in Glendale/El Monte area....
No longer need this rod. Selling for $50 picked up in Glendale/El Monte.
Great fish and video! Really enjoy your reports!
Sweet rig!! Really miss my old one.
This is one badass rod. Flings a tady 45 with ease! Light with a ton of back bone.
Interested in a 30?
Interested in a 707h acid wrapped? Older blank with line rating of 15-25
Hey tony, the m1 is hard to beat for the money! A m1 8'2" heavy should fit nicely on that 300.
Bump 30 bucks. I'll work on some photo this weekend
Yeah. That is very doable yourself
Nice sandbags. Have yet to have a productive day at izor!
Looks like you sent in your lower unit. I got away with removing the seal without...
I didn't know gloomis built rods to space requirements.
Usmc, are you selling one loaded with braid for 180?
Pulled both seals last night. Took me 30 minutes. Hardest part was finding something to pull with. Used a channel lock and hammer.
Would you be interested in parting ways with that 115??
Star or level drag bud?
I have a 82mh if your interested. If not no worries. Let me know if you change your mind in selling. Thanms
Thanks for the report and great job as usual! How did that little Trinidad hold up to the brute power of that yt?
Good luck on the search. The 815 is my go to rod for them bass!
Too my understanding don't you have to drill through the metal part of the seal to thread on the screw?
Not concern about the first seal since...
Gecsr1 any issue with swarf from the drilling??
Thanks bud. That was real fast! Took one day after payment!
Yup, those are the tools I'm hoping someone has and is willing to lend out. It's a long shot but worth a try.
If I can't get the tools I will...
Thanks for the response. The seals for the drive shaft and shifter shaft was replaced last September as well as the impeller. However the prop...
Rating in the gl3?
Need a second option here on determining if I have water intrusion in the my Yamaha outboard. Decided to quickly check if there was any...
You and me! First person who actually came to look at it purchased it.
Those are slugs!!! Congrats!
Bump! Finally got a chance to snap some photo!
Looks to be a good deal. Would jump on it if it was not for the gold guides.
Epic report! You guys are on fire with the yellow tails!
On a side note do you guys ice down the fish? Or does the bleeding and sticking in...
Found another flaw on the reel after closer inspection. See photo below. Does not affect fish ability. Bump
Pulled in a a handful of yft last year with a Lexa 300. Doable but one after another was not too fun on a 8' rod.
The toro on the other hand...
Yeah, I am a bit baffle that it has yet to sell! I will continue to fish the harbor with it. I am in no rush to sell it as I found a place to...
Price reduced. Bump
Bump, posted pictures.
I am surprised as well! Perhaps it's the lack of pictures on my part. Just been way to busy to get out to where it is stored and clean it up a...
Reel was service earlier this season and is in great condition. Only flaw is a boat rash on the left side plate. Good reel for the money. It...
Intreated in. 800m?
Yeah, this fine piece of aluminum is still for sale!
I'm curious as well. Looking to purchase the new torium or the cedros star drag.
You are correct! Too bad they are out of stock now. Smh
Nicely done. You guys did better than we did that night.
for anyone interested. I believe these are are the old one. Still a good find!
would you be interested in a Cortez 10?
Would this be the new model or old model with a red blank?
Thanks for the report. Definitely a good day catching on the water!
Cork is a bit dirty but that is about it. Looking to trade for a Hercules 70h, 6470, 6470h or similar. Rod is located in El Monte or Glendale....
Would you be interested in the 6.5' version, 6465h?
I'll take the smaller one.
Interested in a 800m deck hand?
Should be no issue with the pickup.
Thanks For the kind word jimmy.
I honestly don't know the weight of the trailer or boat. I have seen a guy at the ramp pull his rig which is...
Still my favorite type of fish to target!
No interest in parting anything out of it. Would like to sell all together.
Hey Martin, hate to sell it but I decided to keep the kencraft. Money raised for this will fund the electronics on that boat.
Thanks for the kind...
Bump, will trade for the following rods or equivalent:
Gfgr 800m and 700h/xh
Psw 809xhj and 700h/xh
6480, 6470/h and shs70h
Not interested in parting out anything at the moment.
After much debate, I am finally ready to sell this little skiff. Boat is located in El Monte, CA. Looking to get $sold. Feel free to call or...
Thanks for the report. How was the weather btw?
Depending on depth and current, I fish 2 to 6oz triangle head on 6" swimbaits. Key is to keep it at the bottom. I can care less what color it is.
Thanks for making my hung over Friday a lot more enjoyable at the office!
Looks like we will be seeing a lot more of your reports with the semi...
Hey Mike, it's been awhile! Still have that badass twin v?
Awesome report!! Good job finding and putting your crew on the yt!! Hopefully we get into some come Sunday.
No worries, going to have to decline the $140. Thanks for the interest.
Will trade for a 700h and 6470 as well. Robert shot me an offer for it if your interested in purchasing.
Would make a great spare!
Nice calico! I have not fished the wall in two months now. How was the weather?
Nicely done! We gave Izor try in the afternoon after the yt bite died but was not as fortunate as you guys. You guys consistently pull nice bass...
I always launch out of ss. Never had a problem. I don't come out of the middle of the channel though. Instead I stay on the Queen Mary side.
Thanks for all the kind word. Took me 5 trips to even get one to bite. Almost lost this one too. Swimbait came right out after the line went...
Went 1 for 3 today with a little help from a friend. All fish we were hooked up in 90 to 110'.
The first hook up was...
That is a beautiful boat! A buddy has an older one and it is built like a tank!
Nicely done! We ended the day with one yt as well. Being there at the right time at the right place! Where you guys in the Robalo?
It is a good deal with braid. I have a 2000yrd spool of 40lb spectra that I will be loading onto this reel though.
That is not a bad price with braid. But I'm looking to spend less than that. Thanks for the response and good luck
Looking to purchase a Lexa 400hsp for a light surface iron setup. Thanks!
Awesome report as always! How heavy are your lead heads btw?
Bump. 50 bucks!
Tempted but no need for such a big levelwinder. Anything reel for yoyo?
Hey Oliver. Interested in trading for your toro 50?
They are indeed good. Sent in my Cortez 10 and Komodo in. Got them right back to me within a week. Also replaced my Komodo for a brand new one!
Good job out there! Was out there this morning looking around. Lots of idling seagulls with no marks below.
Digging the steering wheel cap! Tempting but still have my 14' aluminum.
Your looking for a reel seat rod right?
Got a deckhand version if your interested.
Will the 13 1/4x17 fit a Yamaha f90? If so, what's the price?
Three blade with 15 spline
Bump, still for sale.
Nice fishing report! As usual, Awesome photos!! Need to find some time to get out there for another shot at the tuna!
All last season I fished straight braid for bass in cover. I noticed it was real easy for me to break off once snagged. This is most likely due to...
I was actually on the inside of the wall. It's been real slow for me on the outside this year. It was not a rental boat. Don't think there is a...
Chris, everyone on board needs a gauge?
Since I won't be in town for the friendly tournament tomorrow. I thought I would fish the wall for a couple hours. Slight chop made for a bumpy...
Easy for you to say with your 250!
Seems like a great way to spend the night!! Lets see if i can get a team together!
War on the wall?
Definitely a grand slam in my books!
Kevin, it's the prop I bought from you. It did not fit my outboard.
2001 yukon xl 1500
Towing Package with 4x4
Front heated seats
Seats for 8
Red original paint is still good
Tires has less...
Great local reports!! I really need to take a personal day to get out there mid week!
The bite seems to die off during the pressured weekend. I...
Awesome report! I would be jumping up and down if my net came up like that! Also good information about the quickly measuring the bugs.
Have no use for this prop. Model number is 48-16314-17. Come pick it up for 50 bucks.
That sucks Jason! Thanks for the heads up though! I typically set my hoops and leave them. Will definitely stay close to them next time.
congrats Martin.. Awesome little boats!
Anyone know if the ss prop will fit a Yamaha f100? I been looking for a 17' pitch prop. However the diameter is larger than the typical Yamaha 13 1/4.
It's all pregnant and shit!
Great way to spend a day with your pops!
Nicely done! Should have made it happen and went with you guys!
Thanks! Got salmon head for 59 cent a lb!
Will be hooping for the first time this weekend and won't have time to make my own before hooping. So I was wondering where you guys...
Nice local yt!
Reel is sold. Jeremy, I will send it out Monday. Thanks!
It's SDS-C-801MH. Rating is 8', shut down fast , 12-25lb, 3/4-11/2oz
Bump, taking reasonable offers.
Selling a okuma SDS-C-801MH in great condition. Used once catching a couple Calicos. Have way to many bass rods. Pick up in El Monte. $90 firm.
Selling a great condition lexa 300 hs with a power handle. Was used a hand full of time. Has about 100yrd of 65 izor spectra on it. Comes with box...
Got the same rod! Love that rod!!
I really enjoy your videos! Thanks for taking the time to record and post! I was wondering what kind of gear you were using. Looks to be a...
He was trolling for ballyhoos!
Looking to trade a mint factory GFDH 800m for a factory one with reel seat or psw809xhj. Please contact me if your interested.
Bump, pictures are up
Sold! Agree it is one badass rod! Still have another one in my rod rack!
I appreciate the response and advice.
I finally got the housing off by prying the shit out of the two mounting tab. Those tab are very sturdy...
Selling my trusty Shiamno Calcutta 720 XFA Washington rod. Typical cork/guide wear and boat rash along the blank. The action and feel of this...
That will be the last resort. The whole housing should come right off. Giving me access to the seal.. Just having a hell of a hard time prying...
No thanks, not looking any kind of trades right now.
Here is a picture of the oil housing I am talking about...
Looking to sell a brand spanking new makaira 20ii sea in silver. I bought the reel antispating a long range trip, however, plans has change and...
Tonight the water pump as well as the oil housing from the drive shaft has been removed. The two oil seals still looks good but I am going to go...
Typically go with Andy, but I am trying to have this all sorted out by Saturday!
Looking for some advice before I dive into resealing the F100 lower unit. The seals behind the prop looks to be good. However, The...
Forgot to update this. A new p58 transducer fixed the problem. Works perfect now.
Thanks for the link, but looking for used net for the time being..
The NaCl Toro is a solid reel and I liked it a lot. However, recently I had to send it in for service. The reel did not want to engage back into...
Looking to purchase fully rigged hoop nets. Please let me know what you guys got. Thanks!
Good job! Can't wait to get out there and give it another go!
Hey Mike, glad Pacific trailer took care of you! I went to them two weeks back when my bearing decided to explode on me. I shopped around quite a...
Looking to sell my Garmin GPS map 76. The screen is flawless and in great working condition. Looking to get $85
Don't lose it this time!! Haha just messing
91733 is the zip code.
Hey, how much shipped for the 114?
Yup VA imo is one of the best investment you can spend on a boat.
It is a bit hard to get out mid week, but I have no plans to stop because of...
Fished the 182 and 9 without a single nibble!! VA saved the night and towed the boat/trailer home.
With the tuna bite...
I have a lews speed spool and I have nothing but good things to say about it. I fish it once a week and rinse it down after every use.. Serviced...
Thanks guys! Fish weather works perfectly!
Awesome report Josh! Way to go on helping the young ones!
Looking to purchase a second hand GPS.. Looking for something along the lines of a Garmin 76/78. Please let me know what you have! Thanks!
Looking to make my first offshore trip in my 18' cc this up coming weekend out of SD. I was wondering where are you guys getting...
She really gets up and go! Lots of good advice here! If needed I can assist you in you impeller change.
Seems like I am in the same boat as you..
Would you happen to be running a prop with 15" pitch?
Awesome report and video!
I'm in the market for a good bang for your buck hand held GPS. Any advice and recommendation?
I want that Luna back!
Looking to spool a makaira 10sea with 400+ yard of 65lb braid. Please let me know what you have.
Out fucking standing guys!! Want to stick it to them!
Spent the last hour trying to find out the material of the ram with no success.. The only information they provided me is it is Stainless steel.....
I agree, changing out the oil in short interval will be best. So, how long are your change intervals?
I use the boat almost once a week, so I...
I know there was a known issue with the previous generation Revo Inshore but I thought Abu took care of this for the NaCl line up.....
Thanks for the reply and advice! If anyone here up for the task of welding the two back together, feel free to pm with a price!
Sounds like a good time! Especially on my birthday!
Yes, it sheared off right at the eye. I believe the shafts is stainless steel. Not sure about the eye.
Bump! Would dig a 4runner with 4x4!
I was thinking about welding it. Not sure if it would be reliable with the salt elements..
Can anyone chime in on welding it?
Glad he was found!!!
Thanks for the report! Gives me motivation to fix the boat!
Its the piston that extend and retracts out of the tilt assembly. If you look on the diagram in the link below. Its the piston in assembly # 4....
Looks like a good deal!!
Will trade for smaller truck/suv
Bump, posted a link with pictures.
Damn, looks like replacing the shafts out of the question..
This past weekend while trailing the boat back home. The tilt rod decided to shear right below the pivot point. Looking to fix this...
going to pass on the pro gear. Thanks
Didn't get a pm Sanee
Looking to sell a mint 300ej spooled with 65lb red power pro. Reel was used a hand full of time and was recently serviced.
Willing to trade for...
The a50d unit has a built in dsm..
I do not see a separate sounder. So I'm guessing it has a built in dsm.
Mello, thanks for the inquiry. A 19" prop is too much for the engine to turn properly.
It is still for sale. If your interested, pm me your number and I can send some photos
Sweet!! Thanks for the heads up!
Thanks for the tips. Plenty of macks on the outside of the wall. Tipping with squid was the key.
The pins have no signs of corrosion or debris of any kind.
I usually go to my local tackle shop. They usually have some laying around.
The motor is a F100. That prop is a little to big to turn.
13.75 or 13.25
Looking to purchase a 15 or 17
pitch prop for a Yamaha outboard.
Never had an issue with the position and clearance of the ducer on my previous trips. Started happening recently..
I recently have an issue with this unit mated to a p58 transducer. It is not reading the bottom and the depth.. The depth indicator is...
Epic!! Thanks for the report! Calico on the iron is awesome!
Awesome! Thanks for the footage.
Thanks! I'll try it out! Hope you guys were not bring sarcastic.
Awesome read and what a catch!!
My psw809 had the same issue. Replaced it with a Fuji alconite.
Thanks for the response. Changed the oil yesterday and made a huge mess!!
2001 yukon xl 1500
Towing Package with 4x4
Front heated seats
Seats for 8
Red original paint is is good condition, still...
I have plans to fish Sunday morning locally at Palos Verde and wanted to make some bait. Where would my best chance to make some? Any...
Looking to purchase a Penn Baja Special or equivalent for a 40/50lb yoyo setup!
I still have the phenix m1 77mh if your interested.
Someone is selling a quicksilver ss prop with a 16" pitch. Should be a very similar match to what your looking for.
I use rotella in everything I drive. From cars to 4 stroke motorcycle. It is a very stout oil and i have no doubt it'll be fine in the outboard....
I am tempted to use rotella t6 in my yamaha outboard, but a bit hesitant. Is any one running heavy duty dieasl oil or non marine 4...
Hey Tony, are you still looking for a power handle?? If I can find my old one you can have it.
Up up up
Thanks for the response and help. Outboard finally runs like it should! Like a bat out of hell!
Used a home made one for about 5 bucks. Long clear tubing filled with mystery oil. Carb 1, 2 and 3 where synced to carb 4.
No, it's a 4 stroke carb. Not sure what the hell it is but ended up putting the carb back with the stain.
The initial problem is one of the...
Still looking for the rod. Interested in a 40 rod as well!
Got everything done today. Hopefully she runs like a top this weekend,
Tony, I used the Abu inshore power handle for the 253 before. Not sure if it'll fit the 300 though.
I'll give dawn soap a go. Thanks!
Gonzo, thanks for the story and the heads up. Got myself a manual when I started to tinker with the outboard....
Any local places around LA for Yamaha parts?
Thanks, but I believe it is flammable, do not want to risk starting a fire. Even though the solution will be in the glass beaker
I am in the process of rebuilding some 4 stroke carbs. Everything seems straight forward beside what to use to clean them.
Saw some 5oz Kroc the other day at Richards tackle.
Sick! Been getting the itch to have you build me a rod... Maybe a 700xh..
Back up.. Still looking for something locally..
Sold! Thanks Jeff!
Looking to purchase a 7' 50lb rod. Something along the lines of a 6470h. Not looking to spend too much.
Lots of flaked.. Bump...
Jig, I'll give those jerkshad a try next time out! Thanks for the tip!
Gloomis PBR-843C brand new never used
SOLD or trade for a G6470-7' or equivalent
She sure is! She likes to fish or should I say catch! Too bad I suck at putting her on the fish.. Will be putting a lot more time on the water...
I will play!! Caught this little guy yesterday wall banging. Not sure if this will qualify, but did the best I could with the photo.
Its been about a month since I have done any kind of bass fishing, so decided to fish Friday after work. For some reason, my typical guys were...
Just as long as it is on your dime.
Back up top
Will also trade for a 7' bait rod rated for 30, 40 or 50lbs.
price drop for everything.
Also consider trading for the following rods ss6470H, ss6470 or equivalent...
Hey Johnathan, awesome pictures and report. Quick question though, who makes those curly tail swimbaits?
Saw this the other day! Congrats!
Looking for some xtratuf size 8 in men around the LA area.
USA made or China, just need them by the weekend!
The reel is in mint condition. If you want some photo. Pm me with your phone number, I can send a few pictures via mms
Yes it is still available. Can pick up in Glendale or El Monte.
20lb/300m, 30lb/200m per daiwa website.
Hump day bump..
Damn it! been looking for a tow vehicle like this!
It sure was! Sold, thanks,
Back to the top..
Bumping back up!
Okay okay.. One more time, 70 bucks!!
Sold!! Thanks Bd
Don't think it would be worth it if I was to ship it.
Sorry boss man, no lines on it.
Final price drop to 80!!
Will pass on that offer. Do not wear watches, thanks though.
Have a like new salitst 35 black gold. Used twice last year. Priced at 140
Riverside is not to far from where I'm at!
Selling a slightly used factory wrapped psw 809h non deck hand. Could definitely pass as new. Priced at 220.
Reduced to 90, come and get it
Found them a home! Thanks
Bbr is gone. Bump!!!
I'm sure someone is looking for one. Help me with my expenses at Coachella!!
Way to go, thanks for the report!
Sister bought this rod for me as a gift for fixing her car. Little did she know that I have way more than enough bass rod.
Used once and have...
Awesome report! Thanks for the motivation!
Seeker sold! Bump!
My girlfriend is the same way! Too bad I have a hard time putting her on the fish! Haha
Gloomis bbr is pending. Bump!
Was planning to fish around the twin rig this weekend... Any other suggestions/advice?
This is a long shot but thought I would give it a try.
Anyone has any Yamaha prop that I can try out? I have prop pitched at 15 and would really...
Was told to be a seeker inshore blank that has been cut off a couple inches from the top. Measure to be roughly 8'3".
Have no real use for these at the moment and could use the extra cash for Coachella. Pick up in El Monte or Glendale. Thanks!
Thanks for the feedback! Will continue to use the 709 for weedless baits.
Imo newer doesn't always mean better. Been consistently turning back to the Washington made Calcutta rods! Like them better than the m1 inshore....
Offer has been filled, thanks!
Perhaps next time!
Looking for one person to bang the lb wall with me tonight. Will be fishing from 6pm to early morning. Pm with your name and number if your...
Damn not sure if I'm disgusted or envious......
Nice looking Z!! I am getting rid of my beloved nissan 240 (S13) in the name of fishing as well! Goodluck!
Sounds lol the mag control will come in handy as I am not to key on tossing the iron. Toss the iron a couple trips on a Saltist 35 straight braid....
Looking into purchasing a new reels for throwing the surface iron/live bait on a psw809.
My coworker suggest the Saltist bg 35 or...
Looking for someone to take in these 2 small puppies. I do not know much about them but they are roughly 5 month old. Breed is some kind...
Mike, let's flip for the cutting board! I will be in Corona tonight!
I will take the board if Mike ends up not taking it. Thanks.
Have never been harassed for doing so.
I was using a white bait whike my cousin was using brown. Both on half oz.
We fished the outside for 45 minutes and could get single bite so...
Fished the wall Friday night/Saturday morning. Could not get the larger fish to bite, so switched to 4in baits and got loads of small calico....
How much for the trolling motor?
Interested in rod 5 and 6.
Boat has been sold. Thanks
Caesar, been fishing the wall lately?
I would say it's 200 for the cable and about a day of your time. Remove the old cable while you reroute the new one in the same path.
Tray is correct, I bought this boat from grader maybe 7 month ago.
Hull is fiberglass and does come with a 6hp kicker.
Yes sir! I should clarify that it is a 75 with bigger carbs.
Purchase two boats this year and I realize I have no use for this one, especially since my fishing buddy has a similar setup. The boat is great...
Looking to get into some trout fishing up in the Sierra Nevada this season. Need a couple ultra light setup! Please Lmk what you have and how...
Have a brand new 7' PBR 843c that have no use for if your interested.
Yes sir new with tags! I'm located in El Monte and Glendale for work.
Looking to sell my brand new phenix psw700h. Decided to go with a hybrid instead. Would like to get 270 for it.
Damn, missed it again!
Planning to be out there from 10pm and on. Probably fishing the outside of angels if weather permits . I'll see you guys out there. I'll be in a...
Great report.. It doea feel like winter bass fishing. I'll be our there tomorrow night as usual.
Mike, thanks for the awesome sticks!
Here's a late report of the wall last Friday. Threw a lot of brown 5" swim baits at the wall from 10pm to 5am. Ended the day with a lot of decent...
What was the general location of the bite? Was out on the flats today with no luck on the turd rollers.
Got one bnib for 170
Would like to unload these or trade for a surface jig rod/reel.
300ej - 200
- used only once, comes with box.
200e7 - 120
- upgraded abec 7...
Planning to be on the water tomorrow (long beach). Will South Shore be a freaking zoo??
pmed about the saltist 35!
Congrats on the boat Martin. Looks real good and I'm sure you'll dial her right in!
Thanks for the kind words and advice. Definitely going to get a couple inflatable pfd!
Not sure where your going with this but yes, I am well aware.
This is my first fishing report so please bare with me. With that said, I picked up a 14ft aluminum skiff last week as my first boat. Was...
Interested in both phenix if it falls through.
Interested and pmed!!
Damn..... That was fast...
Thanks for the awesome reel at a great price!
Priced drop to 130 for the cbr
Looking to spend under 200. So if anyone has a good one, let me know. Thanks!
Need the extra funds for the holiday...
Curado 200e7 - 110
Is in good condition with nick here and there. Braid is no longer on the reel....
Interested in the Curado and Sahara. PM me with some contact information.
Tubing hung over is awesome! Glad, you made it out. I was hesitant to go alone this weekend. Perhaps next weekend!
Sucks about the ticket! On a side note, how was the wall?
PM with what you have to offer.
Now that's a proper session!
Finally got some pictures up. BUMP!
Fish Cat 4 has a rip on the left compartment. Other than that it's in good shape. 100 firm
Caddis Nevada Gold has a patch...
Hey Ernie, seems like your a pretty hard person to reach. I'm sure it's because all of the moving and what comes with it. I Just wanted to know if...
Whats the asking price now?
Tried fishing at the marina near Joe's yesterday.. Was told fishing isn't allowed there.
Complete forgot about this!
It has spectra backing
I have no use for this Toro 50 hs and would like to sell it. Comes with both handles and box. It is in great working condition but could...
I have plans to hop on a 3/4 charter out of Dana Wharf this week and wanted to know what they are targeting right now. This will be my first...
Still looking! Bump.
Price Drop to 110
Looking for two of either reel. Must be in great condition, physically and mechanically.
Bump.. Will sell for 120
SOLD!! Looking to trade my luna 253 with carbontex drags. The reel is is great working condition but isn't the prettiest thing. Will have...
Sold, thanks Will!
Anyone want to trade for inshore rod?
Bump, also up to trade for a Phenix ultra swim bait rod or something along that line.
On your dime? Yes
BUMP!! Picture added and decided to sell the better condition luna.
Girlfriend prefers the low profile reel so no longer need this. Its in great condition. Looking to get 140 firm.
Caesar, that rod is awesome! I might just take you up on that offer!
Interested in the 904 as well
Wow.... Faster than a 10$ BJ in TJ.
Its roughly 210360 hours Hahahaha! Lmk, I have a friend who can cut me up
Been looking for a rig like this.. Willing to take my kidney with cash on top?
If you have the 932 in a week or so ill take it
Did you sell this?
Separate names with a comma.