Congrats! Are you selling the Cabo?
I bought the trailer new in Oct 2017, and used it a few times. It has been stored indoors. I thought I would see if anyone here is interested...
Trailer Valet XL Pro is a beast. They are local in so cal.
Mag Bay 42
I saw that Salt Fever was for sale. Did it sell before I could get my offer in?
New to HH and looking for a good bottom cleaner in HH.
Looking for a 40' slip in Newport Beach
Try www.performanceboattransport.com Colt is top notch. 850-791-4149
Nice rig! I can't understand why you didn't want to pay 20-30% more for a boat from a calif dealer?:rolleyes:
Thanks Dan. It looks like the reservation site is down until Tuesday. I will check back then.
Does anyone have a good referral for canvas work in orange county?
Can you reserve a mooring? Are for sale signs allowed?
I still have a skipjack 24 that needs a new home,since I recently bought a new boat . This sounds like a great event. I'm in if i haven't...
Nice work. I did mine a couple of years ago. I used West Systems for the build. Awlgrip in the bilges...its rolls or brushes with good results and...
I installed a similar pulpit in my 24. It worked out good. Pics should be in the show me your skipjack thread from about a year ago.
Gary, I sent you a pm
Laurence, I will shoot you a pm with questions if i decide to move forward with a 28. Thanks for offer...much appreciated.
Are there any 282 owners in OC or LA ? I have been looking at them online and I like the layout. I have heard good things about them, but have...
Tapout...lets hear about your yellowfin build .Sweet!
Uncle Lewis boat review[ATTACH]
I'm in the process of remodeling my house and looking for a good finish carpenter in north orange county. Job details are crown moulding, window...
Was anyone else bidding on the farallon yesterday on the crankyape site? I was and the unit was pulled at 12:23CST from the site during live...
Do you have any pics of the engine room? Can you post speed and fuel burn numbers?
Depends on your definition of Our...sorry bro you left the door wide open for that.
Looking to have a couple of rods built. Anyone in orange county?
and 5200 miraculously improves the strength of stainless steel?
Broke .....Dimension with *hole pattern if it matters to you.
I have one in my storage unit....it may take me a few days to get to it. Send me the dimensions with hold pattern if it matters to you and i will...
6500 and lots $
Somebody explain to me why this boat hasn't sold. Has any BD members checked it out?
Where and when can I see take a look at her?
Tip of the month = no tip is a good tip
You have skipjackitis.......be careful its expensive.
Have fun with the build
I have been contemplating buying a bigger boat and after seeing the 28 at the Fred hall show I'm thinking about buying a 28 whale back. Are there...
Vince @ www.americantanks.net
I hear you....I've spent many hours polishing and $ on keeping up the isinglass in the past.
Nice work Frank! Being in Wa you may not get the warm summer days like we do, but you might want to think about or leave room for adding a hatch...
Thank god I have an office! Its the only space that I have to decorate as I want...well that"s what i keep telling myself.
Robert...you must be single. I have to spend twice as much on the wife as I do fishing gear in order to keep the peace. 2-1 ratio keeps the wife...
Not to hi jack this thread ...but the pics remind me why I hate isinglass. Good luck with the crew. Shoot some videos and give hardcor a an run...
Nice boat Dave. The wife would kill me if I had two boats. I need to find a new home for the skippy. GLWS
Take a look at Rigid Industries. I have the D Series Dually spreaders and the 6" E Series. The 6" E Series is 4500 lumens 45watts 3.5 amps. it is...
I fished out of SD , but no gas Volvo diesel
Great read Pete!
I like the attitude.....I'll let you know when I have room for one more.
I went with vinyl. Give Olivo a call....he worked for skipjack and did all of their upholstery work. He does great work 714-542-3361
Ali makes a good point about getting the real advantage from being flybridge and tower level. I can sit on my hardtop through a hatch in the top,...
I bought them online from optics planet.
After reading the reviews, I ordered a pair of Fraser Bylites. I hope they are as good as people say they are.
I will post a review once I receive...
Hull# 2 looks sweet!
Is there an option to have a bigger bait tank...maybe instead of the ice chest? Will there be any special pricing...
Thanks Tanner and Ali
Skippy729 The hatches are Bomar..not cheap but 100% water tight!
Commercial Grade SeriesAluminum Inspection Hatches &...
USMC8541..its a 81. Your PH is looking good.
Thanks guys. It was 36" long .....no scale to get a weight.
Can not take from a boat rod and reel... Jan 1 until March1, but we would have released it anyways.
My dad got this big sheephead at a local rock pile. We took a quick pic and released it.
Al ......I just posted some pics in the show me your skipjack thread.
Here are some pics of my 24
Sardine on the dropper loop ...west outside horseshoe and worked east about 3miles
Took my dad out yesterday looking for local YT. 58 degree water and lots of YT on the meter. It was awesome to be catching big YT in Jan. Even...
The weather looks like its coming down for sat. Is anyone going?
My schedule is not 100% yet but i'm hoping to leave early sat am out of long beach.
The B175HW is a good choice. I have metered tuna at 250-300', bait fish/squid, and its incredible for bottom and structure. I have it connected...
I have B175L chirp and B175HW chirp. Navico maps show restricted areas.
Eric, The swim step bracket is gone, but you can have the rest.
Text me and we can work out a time to pick up 562-335-2070
Jim, I just made arrangements with Broken Rod to pick them up tomorrow.
Great Job John!
crap on the camera lens...I need to remember to clean it next time.
I fished my Honey Hole at Cat on Sat too
[ATTACH] [ATTACH] Anyone have a need for any of this before it goes in the dumpster? I'm in north OC 55fwy and the 91fwy
For someone who can use it and not resale. Model CCX63308 8ft Xtreme cable.
I'm in north OC 55fwy and the 91fwy for pick up
For someone who can use them and not resale. Two Garelick 32" seat pos.t I'm in OC 55fwy and the 91fwy for pick up.
Tunaslam has it correct...the Fat Lady has song. Stay home and save fuel.
Shad..I will send you the address and my cell number.
My bad ...forgot to post a pic.
New Starboard door made by boat outfitters artic white color
outside dims 22"x11"
cut out dims 9-3/8" 20-3/8"
I'm in Anaheim..please local pick...
Repowered with a Volvo diesel.
Blubby07 I'm up for running out with you guys. pm me if you want to talk about details
Does anyone know if todays fish was on lure or bait?
My bad I thought this thread was about Reel Nice & Easy a "non old wood" Cheoy Lee sportfisher that had a blue to leader last weekend.
Strong52 stated Old wood and Diesels. Anyone know what kind of boat it is? I saw a pic of the boat that I thought it is and it didn't look like...
Winslow Raft, EPRIB, Sat phone...you can never be too prepared.
That's one way to look at it....each to their own. Man I love the USA!
Slice -of-life I think what you are saying is "most of us" back off of a patty to avoid the little guys.....drift away and catch tuna!
rolled or bong load?
Not endangered .....and they taste the same as the big ones or so I have read.
Nice Skippy! Although, I'm a little biased to a pilothouse skipjack.
Maybe he has a 40ft center console
You should of used 1-6 for bait
check out Navionics.com The standard charts that came with my NSS12 are weak at best.
Does anyone have an available boat slip tomorrow for a 24ft boat?
btw nice boat
thanks for the come back Neil C
Did anyone get bait from Nacho today? Getting a current bait report has been difficult. What did he have Sardine, Squid, Chovie?
Hey...sign my up.....oh wait that's the other site that has a spotter plane or not.
I had questions and some confusion regarding the FMM and what is required. Here's what I know. Somebody jump in if you have additional info.
Thanks Neil. Did you ever get the outboard bolted up on yours?
Tom...do you recall which globalstar phone you used? They are offering a rebate = free GSP-1700 phone with the unlimited plan, which is 149 a month.
To clarify..i'm looking for a hand held portable phone. GlobalStar has reasonable rates. How does their service coverage compare to Iridium?
Does anyone have any recommendations for a Sat phone? I'm looking to purchase a phone for use while fishing off shore and the islands where cell...
Fintastic thinks the post is lame
fintastic rated your post [IMG] Lame in the thread Seal Deterrence.
Update: Confirmed that PB works while trying to make bait.
Who is the expert on legal seal deterrence methods? I was looking at the NOAA fisheries and came across this. It states that a private citizen can...
Can you post a pic?
Simrad AP 24 with R300 Rudder Feed back
I'm going to Dove Island in Sitka Ak at the end of the month. Does anyone have first hand experience of what not to forget to bring?
I don't have a banner hook up, but I found this place on line www.858graphics.com. it looks like a 3'x8' banner is approx. $200.00. I'm sure there...
Free if you can use it...not sell it.
8ft poles ...good condition
Pick up in North OC
Thanks for setting it straight Derby. I owe you a seller's commission.
Brick_Haus...I'm not sure about the compatibility.
Here's the info from the invoice from Airmar/Gemeco
200kHz 20* Tilt Wide Beam S/S D/T Low...
Nice install...I'm only selling because sometimes I have $ than brains. I just installed a Simrad BSM-2 with Chirp B175 L and HW transducers.
Newell 332-5 Like brand new $95
Hummer Dude....I'm passing along a good deal for BDer that can use it.
Derby....you are correct. I found the other cable that has the blue end for lowrance or simrad. I bought the transducer a yr ago and never...
The transducer has a connector that will work with Lowrance or Simrad....not sure if you can re-wire it to work with other brands.
Didn't get it figured out. I want to delete the 3 pics and add new ones.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Brand new Airmar SS264 200khz wide beam 1kw 20 degree tilt with navico blue connector
Is there a thread that explains how to Delete and Add pictures?
Thanks you. New helm pump and addition of power assist. How's your project coming along?
I have the bay star helm pump and wheel that came off...
Nice haul John. What kind of steering upgrade are you doing?
Just splashed my 24 with a Farallon pilothouse today......you can't go wrong with adding a pilothouse.[ATTACH]
Good to hear that it worked out for you. Test ran the engine on the trailer today.....putting it in the water on thurs.
Factory skipjack stern rail ...in good condition---needs polishing.
PM or call 562-335-2070
Looking for someone to replace a few rusted pieces on a utility trailer. I'm in the Anaheim area.
PM or call 562-335-2070
6'x6'x4' Dog Kennel...bought it at Home depot. I used it one time and put it in storage....like brand new.
I'm located in Anaheim...
SeaHawk...I sent you a PM
Approx 200' of 1/2" rope and 50' of 1/4" chain. The rope is in good condition.
Located in Anaheim.
It sounds like Sherm has a good reputation.
Question for Sherm..........Do you write agreed value polices?
Nicestriper and congrats on your first. I see lots of mixed opinions regardingkeeping and releasing his first. I think all of us are probably...
John...where did you buy the 1/2" pvc sheet?
Neil.....How's the project going? Is the outboard hanging on the back?
Just curious..what shop?
Neil...How's the project coming along?
Darren....I will give you a call when the bow is done and the electronics are installed.
looks good. Looking forward to seeing pics of the conversion.
Neil, Not in the water yet....getting close. The bow rail is tack welded and ready for welding and polish.
Neil, I have price checked a new Yamaha 250 or 300 FS and a bracket? I bought a brand new Volvo diesel stern drive package for about the same $....
Good Automatic Windlass
What did you get for it? I have one in my warehouse........280 lower with a new prop.
I added a bow pulpit and i'm having a new rail built.
Its a Farallon PH
White Teleflex gauges in great condition.
Selling as a package ..I dont want to split them up.
Morse single engine top mount control. The control is in good condition. It has a few small corrsion spots around the mounting holes.
Brand new side mount control Model Uflex B310B Here's a link to the MFGs website.
Uflex USA - leader in steering and control systems for boats
Bow rail off of a 24' open. The rail is located in north orange county.
Message if interested.
Daniel....I'm doing a 100% rebuild on a skipjack 24 open and the diesel will make it ( in my opinion ) the perfect set up....no other reason than...
Thanks Yknot. It's a great engine for someone looking to repower.
I posted this on craigslist and I thought I would try here also. This engine came out of a 24 skipjack. PM if or feel free to call me....
Maybe even 3x
I'm getting ready to cut out the transom sterndrive(Bravo3) hole in a skipjack 24 and install a new engine/sterndrive. The transom has been...
It was great meeting you. Thanks for the purchase and for making the long drive to pick up the DP.
Get the props from Darren. You can...
Mike one last thing regarding this quote from you
. Please if you got crap to sell dont sayits gold in your ad
Darren, <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
Thanks for the back up on this. <o:p></o:p>
<table id="post" class="tborder" border="0" cellSpacing="1" cellPadding="12" width="100%" align="center"><tbody><tr><td class="thead">John take a...
John and all others, I have been traveling for work and haven't been available until today.
Here's my cell ...........feel free to call me...
Mike, <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
I’m going to over look the fact...
Hey Darren....Its Steve.
I have the drive off your old skippy sitting in my warehouse. PM me if you can. I would like to get your input on what...
I have a few boat parts left over after rebuilding a 24 open.
Here's a list of a few of the items that I have. The boat was purchased from a BD...
Do you have any pics?
Barrett..I'm looking for someone who can weld, polish, and bend/form the ss rub rail. I can do the final install. I also want to find someone that...
Barrett..Nice Build. You got it down.
I'm currenlty looking for someone to fab the ss hollow back rub rail on my boat. Are you doing it yourself...
Can anyone recommend a good mobile mechanic in North orange county? I'm looking for someone to remove and install an engine and outdrive. I also...
Bill, The helm arrangement sounds pretty cool. I'm currently doing a retrofit on a 24 pilothouse and just starting to lay out the helm area. I was...
Bill, Do you have any pics of the helm seating?
I'm planning to remove my Volvo 280 outdrive tomorrow. Does anyone with removal experience have any pointers or helpful how to's or if anyone...
I have 1000 rounds of 308. I'm in orange county. Let me know if you are interested.
I'm interested. Here's my number 714-974-7414 Thanks
Engine make and model? How about the outdrive...year/make? Did you replace the fuel tank? your add says no electronics..I see a radar? Price?
Really? Whats next mako pups?
All, Thanks for the Help!
Can anyone recommend a guide with a boat to fish DVL?
Thanks in advance.
Thanks for all the info guys . I really appreciate your help!
I have a couple of rods that I'm looking to get wrapped. Can anyone recommend a rod wrapper in oc/la?
I have a few misc items that have been sitting in the gargage that I would like to sell
1. Minn Kota MK-220 on board charger 2 bank Brand new...
Can any recommend a good mobile Yamaha outboard mechanic. I have a 2003 150HP Yamaha 2-Stroke that needs a tune up and regular maintenance. The...
I should have included this in my original post. I live in Orange County 91fwy&55fwy
I'm installing harwood floors in my house and could use the help of an experienced installer. Just thought I could throw some work to a BDer. I...
Has anyone used one? Any comments? Cheapest place to buy?
Separate names with a comma.