Torque 25n & Torque 12 side by side
Posted by Tunanorth
No, they will not.
The "25" is its own distinct size sideplate, roughly in-between the 12/15, and 25N/30/4
Thanks looks like I need to send it to Penn. Its a brand new reel I had my local Penn warranty center service it and they could not find anything...
Shawn has nice gear his talicas are in good condition.
Hey Steve what adjustments are you referring to?
How much drag should a Fathom 40nld2 have at strike without loosing freespool? I am loosing freespool with a strike setting of 14#’s pulling...
40n star would be cool but its my understanding that peen has discontinued the torque star drag line all together.
How much I dont see a price?
Fished out of Point Loma Sportfishing on Friday. Trip was listed at $225 and thats what my card was charged no extra fee’s or bs.
Monte Carlo big boat lots of room and I really like the extra seating on the sundeck.
I'm on that trip with about 5 of my buddys.
Marky can get down with the food.
Anyone fish this rod yet? Lets hear it.
Fathom 40nld2 (425yds) of 80# Izor solid (20yds) 60# Izor XXX mono
VISX 12 (600yds) 80# prospec (40’) 80# Izor mono
Its not really noticeable unless the spool has tension on it. Seems like the only people that have an issue with it are the ones who hate on penn...
What shimano section its gone.
Savon tackle has a very good selection of rings.
Penn torque star drag in a 12 or 15 size depending what your budget fathoms are also a good choice. Daiwa saltiga 20 and shimano trinidad 12 are...
Prevent corrosion on the aluminum surfaces
Cool reel with great free spool.
It’s Payday someone buy this.
I have one forsale
We must have been there around the same time Sam was putting a new shipment away when I was there around 11
I was like damn you just sold me this lol.
Ready to fish
(SOLD)Selling a brand new penn Fathom 40nld2 bought from Steve Puckett 2 weeks ago decided to go another direction.
$235 picked up in Carson...
I really like the pursuit but when you get over 35 it starts getting difficult. Native sun usually less crowded or you can try and find a spot on...
Island tackle in carson has some in stock give them a call.
SOLD selling a progear 454 yellow tail special just serviced has 4:1 gears , carbon drags. 300yds 80# braid with 50yd 50# Izor xxx top shot ready...
looking for a factory calstar 90j with a honey colored blank. Pm me with what you got thanks.
Alberto knot and surgens knot have worked well for me.
Island tackle in Carson had one in stock I believe try giving them a call.
Selling a yoyo/ bait setup factory calstar 6465H with a progear 454(yellow tail special). Rod is like new and in perfect condition reel was just...
Penn international 30 2 speed with tiburon 1pc frame built by Cal Sheets. This reel is set up to fish 100# line drags have been upgraded to new...
Bumping this old thread so where does the phantom fit in is it a bait rod or jig stick? 30# or 40#?
Can you give some details on the 15XN?
If fishing during the week Pursuit usually has between 25-40 anglers. But on the weekends it’s usually full load 65-70 people and is a combat zone...
This guy is also selling/scamming on OfferUp.
I my opinion the most versatile set up for so-cal is a 30# rig. Calstar 800M with a quality star drag reel like a Penn Torque/Fathom 25n ,...
Someone is selling a black torque 30 on 360 Tuna for $320...
Penn 12 visx 450yds #80 izor solid with a 25yd #80 top shot.
Penn Torque 12 200yds #40 izor solid 30yd #20 top shot.
Got a chance to handle a Tern 300 this week at Island tackle seems like a quality reel. I really wanted to buy it but I already have to many reels...
For socal island fishing its hard to beat a Calstar 800m and Penn 25N star drag with this rig you can pretty much do it all flyline bait , cast...
I think Ryan from turners got his #’s mixed up ther s no way you could fit 696 yrds of any brand 65# braid on a penn 25N
Its amazing the amount of people who defend some of these sport boats when they pull shady shit. There’s always that guy or guys that say the...
I have yet to get my fish processed just curious what size your fish were and how many were processed? $500 is kinda scary
Izorline first string or Big Game hard to beat either one for the price.
Trip was advertised as BFT most on board would rather have taken a few swings at the bft if we strike out so be it. This was a bait & switch move...
So me and some of my coworkers had been looking to book a trip that targets big bluefin and found a 1.5 day Bluefin special trip on the...
What this fish caught on bait?
Pro gear is ready to fish
I have always enjoyed fishing the Tornado caught my 1st Yft back in 2000 on that boat. Haven't been on the boat in a few yrs mainly because The...
Selling some gear I dont use
Calstar 900H 30-60# custom wrapped by yo’s $150 Used SOLD
Pro Gear 440 very nice reel has 5 stack carbon drags...
Any shops near long beach or carson area stock Jri jigs?
Any one have any feedback on these 2 rods (RUS 80 Mag) & (UC Elite Mag 8’). Looking to retire my old calstar 220 and these UC rods seem like they...
My 40# rig is a calstar 800h / fathom 25nld2. I’ve only used it once and caught a 40# bft earlier this month rod a reel performed flawless.
I own (3) penn 25N size reels all of them perform great.
(1) fathom 25N star drag on a calstar 900h 40lb jig stick/utility rig.
(2) torque 25N...
Fathom 15 on the seeker and fathom 25n on the calstar both star drags really good reels for the $$$.
(OG) Penn International 30 took 500yds of 100lb power pro with a 70yds of 100lb izorline mono.
When replacing the flat fall hooks should the hook face up barb towards the eye or face down or does it really matter.
Love fishing the Pursuit but 75 anglers on a 65' boat No thanks anything over 40 on that boat is crowded.
Don't waste your time & $$$ on a jigmaster a fathom 25n is a great reel for the $$$.
I sent my Penn 30 to cal for a blue print and ended up spending around $280.
Bearings & sleeve $65
Rework dura drag plate $25
I have (3) penn 25n sized reels all set up slightly different.
Fathom 25n sd / calstar 900h surface iron/ utility rig. Spooled with 265yds of...
Brand new Penn Fathom 40nLD2 2 speed reel. Reel is brand new never had line on it only taken out of box for pictures. $200 ftf or ship on your...
I ordered one from amazon yesterday.
Penn torque 25n filled to the brim with 410yds of 65# izorline spectra packed on pretty tight by some dude at Savon Tackle.
Calstar 800M is a good double duty rig you can fish bait or toss surface irons. I am currently using a 900H with a fathom 25n for surface iron...
I ordered a 40n on the 9th and its still awaiting fulfillment. I called there customer service line this afternoon and was told one of there...
I measured it off a spool i have.
65# pro spec is around .014”-.015”
Yes they emailed me a tracking #.
I ordered a 25nld2 on the 4th and Ups man dropped it off yesterday no issues other than ups is slow AF. Had it spooled up today with 65# pro spec....
Anyone tie braid to the iron with no mono leader?
Trying to find out when my international 30 was built S/N# MC3274. I know its old could be from 60’s or 70’s thanks in advance.
When it's in your cart or at check out either one.
Thx for the heads up got a 25NLD2 for $164 shipped.
How fast will those boats run with 3 people & gear ?
Sorry no picts but heres what i got
Penn Int 30s Tib frame
Penn 140 with accuframe
Penn Fathom 25n sd
Great write up thanks for sharing whats size flat falls were you using?
Calstar 220 is a very good 20-25# bait rod you can cast anchovies , deans , squid with it. Calstar 220 with a progear 251 is favorite rig for...
I usually bring 3-4 setups depending on trip length
(1) 20# 8' graftec 800m progear 255 (surface bait/swim baits)
(2) 30# 8.5' calstar...
Modified Albright been working good so far.
Calstar 220c and pro gear 251
Has anyone fished the black pearl lately thinking about going this weekend and have a few questions. I've never been on the pearl what should I...
Nice post thx for sharing
Separate names with a comma.