Give ron radon a call and by a new 16
Good luck that’s a tough one
ARE THEY ALREADY OUT?
Best deal is fiberglass supply Oceanside
Super seeker 80 xh
That was on Craigslist for a couple years
I B area down by the border
Buy a etec
The guy has no clue
What is the best jig stick reel out the box with free spill ?
Why don’t you guys let it go if you aren’t fishing the boat, instead of throughing them under bus, get on with your life wtf, do you know ran the...
What is the freespool like?
Bloodydecks you really need to shut this drama shit show down!
Where do u find this stuff ?
The guy in the office sells honey along with the hot sauce !!
Check out the Torium 20 pga 4.8 gear ratio you can turn the handle when you get bit close to Newell gear ratio !
Are they standard width ?
So the supper seeker is made from green glass ?
What is the difference between black- green glass pinhead series rods ?
Who carries all the pinhead series rods in stock the black glass in San Diego ? Thx
HAROLD DAVIS HAS 2 FORSALE GIVE HIM A CALL
I have a black full of spectra 10/10 condition 500.00 firm
Whitey Ashley built the Cortez , Aztec, pacific they all ran out or queens wharf
2 1/4 TO 2 1/2 INCHES THICK SHOULD DO IT
I hate to say but the days are number!
How funny I never posted that
I’m I had 2 tanks made turned out perfect
Call Dana landing
Can you get a TIp at the border on the Mexico side ?
If you take acetone to a white tiger blank will it take the finish off and what color will it be?
CAN YOU BUILD A CENTER CONSOLE ?
WHO CARRIES A LARGE SELECTION OF THE SEEKER PINHEAD SERIES RODS IN BLACK GLASS?
Da they are
Are they 25 inch?
Cape Town they have it all with shorty seas
Cut 90 j San Diego special
DAVIS BOATS 805-227-1170 IF YOU ARE GOING TO DELMAR FRED HALL SHOW HE WILL BE IN CCA BOOTH
Call Harold Davis he can tell you about both and he is the go to for repowers
I could use a 25 inch
That boat was in San Diego several years ago ?
Looking for a rod wrapper Temecula area to rewrap rods deck hand style , turks heads 8-10 ft thx lee know steve
I have a fresh rewrapped d8 willing to trade for the 2 seeker blanks ?
That’s a steal
They need a mini Baja special
Call Harold Davis he is your best bet
I have a hand full of rods that need turks heads anyone interested?
Question so now can we fish the 43?
What size shaft 20 or 25
Penn25 n change the gears to after market 4.7 great alround reel
The only reel service to use is kens custom Reéls!!!!!
It’s a chi blank
Sounds like la bay
I would change boats
What is the difference between the green and the black pinhead series?
What would you notch a 115 hp etec 25 inch in height from bottom of hull , and what is the narrowest you could notch in width ?
Is the oil tank and wiring harness included?
Try kens custom Reéls
That is so cool making those kids day
Someone needs to buy this bitchen skiff these are far and few between
Ask Harold Davis he mite know
Arts tackle in Gardena
What about the Bent Rod in Tustin!
That 39 has been cut ?
That spec sheet is classic I wonder what the price was ?
Take it to kens custom Reéls in Oceanside
Penn Baja special the best yo-yo reel made!
How wet is the 16 radon ?
They around 80 inches
Was this by Davis boats ?
A lot of room for 16 nice boat
Lets see some pictures of your 16 radon
Set inside watch the surf count sets then in between sets it’s time to go you mite turn left and right to get out or the opposite watch the bottom...
Do u ship ?
Where can I buy canary yellow stinger lite jigs ?
What size was it
So what happened to the 20 ft mould that Sven had or Dave Vaness had ?
Where is the best place to buy coosa 26 Bluewater with the best price ?
thx Brian great little trailer
I would be curious if Anderson will sell a blank 17 ft Hull for 4 k
I have a 25 ft slip at mission bay and it’s 350.00 plus 25.00 water power they raised it sept
How much for 115 hp and how many hrs , year ?
Go on lone star .com
Your selling those
Can you make a oval tank 32 gallons ?
Try a cui blank which you can buy local there are no harnell deals in so cal
Check out the gps store on line
Is full of spectra?
Take a look at lone star .com there dealer is in Texas I bought one and was happy and quality unit
So a buddy just got off a 11 day and they were told clarion is off limits , is this really true?
Done got what I needed
I would want to take a look at it
Interested sent u a pm
Looking for a boat trailer for 16 ft skiff , single axle , approximate boat weight 2500 lbs
124 lb yf on a 4/0[ATTACH]
20 or 25 inch shaft how much ?
How many hrs on your 90 and what year ?
Did the have the 300 hr service ?
wtb 19 ft radon any condition for a project , thx
Yep I talked to him it sold and headed north
Wonder what happened to the 20 ft HF Radon named Bluefin located in Santa Barbara area , it was lite blue in color?
There is a lot of history on that boat from the original owner great skiff!
Think about it go to lupe catch nice yf ,then go local and catch a cow bf for a lot less do the math , you get more fishing time staying lupe and...
TNT , lm9, d8, ord8
Thx they probably need the outdrive to fit it to?
need kelp cutter done in San Diego area on bravo 3 any help would be great thx
What generation is the 7x ?
What’s your cruising speed with the 150 hp and fuel burn ?
Only time will tell
How close were u to the pq?
Which one ?
Have u used them ?
need a good yanmar mechanic in San diego
Still for sale?
So where are all the Wilson boats and hulls hiding?
There’s a guy in Temecula that is good can’t remeber his name call safe and secure locksmith they can give u his name I had the same problem
Wonder what happened to the 20 ft Wilson mould that Dave Vaness built 2 hulls from ?
What shop is that ?
I will take it tomorrow if u will take 165.00 in your hood
Trolling and kites are for people that can’t fish a bait or a jig cheap shot fish
You can remove the mc mag with heat and it cast way better
That is my most go to line 40 lb
Wonder what the gph are?
Let’s see a picture of your 15 ft radon
wtb cousins 909t raze rod
Kens custom reels
I think it’s on the rocks up north
Amazon has it
Kens custom Reéls
THAT TURNED OUT PERFECT , IS THE BEAM 77 INCHES OR 7 FT 7 INCHES , GREAT JOB
San Diego plastic they will cut and ship
there is one kens custom reel
Does anyone have any experience on how a Steiger Craft rides down swell ?
Need a Yanmar mechanic in SanDiego area that is good ? Thx
What gone solo
I thought Sylvester works for Jeff
Do it drop it off on your way
Give me a call tomorrow 951-375-1292
If u still have I will take it , located Murrieta let me know
Someone has to have one Bump!!
Prowler hands down with Andrews big fish experience from AA
I know of a 24
Jerry I have a 99 percent black 20
Someone that can do turks heads
Yes a guy in your hood !
That thing looks great !
What happened with the tahita ?
What year is the hull and how does it ride up hill ?
July 4th Bump
Discover baja they are great
The 41 is 200 hp not 240hp?
I use discover baja they have a simple form you fill out send to them they handle it all , 10.00 per person fee 1 day turn around
Fishermans landing has the black out mag 95
Where can I buy 2 pro pedestals ? Thx
Tommy had them years ago
What landing ?
They have a black out series of that rod
When your rod will not bend
SO THIS FIRST 20 MADE, IN ABOVE PICTURE IS A PLUG , SO THAT MEANS GLASS OVER PLYWOOD ?
SO WHATS THE COST OF THE NEW 20 BLANK HULL ?
LOOKING FOR A 17-19 ft RADON HULL , PROJECT , MUST BE A GLASS HULL, THX
What does that 16 Bahia ride like ?
Yes I am
Can your tranx 500 have to much freespool?
Room 10 is the best room on the boat
I have a bulk 20 I mite sell
Fish don’t bite colors they bite the way the jig falls or swims
I am a type o positive send me the info
Thx 2 fare
We’re are u located
What is on the deck ?
I have a blk 20
Toms tanks are great I bought a 100 gallon works perfect and a great price
Walked in Sunday bought a 16 in sd county need to no the right shops
How about a black 20
I have a super seeker sd8 wrapped by moon like brand new
That’s not good
Near shore permit nice
I have trulines
Where is this in Mexico?
If you are wondering about weather on 3/4 day stick to 1/2 day fishing
Taro is the man!!!!
How deep are u fishing
San deigo special you cut 4 off tip 2 off butt , I have 2 of them and they fish great 40-50 lb
Were are u located
Yes it’s a sea
I have a black 20 full of spectra cond is 10/10 if u are interested
Any comments on Cousins Rods , likes - dislikes ?
Where u get the anchor roller?
just put my deposit down today for my ron radon 16 ft skiff so stoked
So someone removed my TIP sticker off my boat in the slip ,so now how do I get a new sticker ,any help would be great
Let’s see some current pictures
I mite sell my 24 Radon in previous picture
What generation is the d8 ?
[ATTACH] 24 Radon
I would try to find yourself a 24 radon like this,nice and heavy with a diesel
Still great del
Is that outboard or inboard power ,and open back wheelhouse?
IS RADON NOW BUILDING A 20 FT HULL?
There’s a third owner who will run the boat
Let’s see who bought it oh I know
MAKE A SAN DIEGO SPECIAL OUT OF THAT BLANK CUT 4 OFF TIP 2 OFF BUTT MAKES A GREAT ROD I HAVE 2 OFF THEM
There are no one better than ken and wes
Nick you have that skiff done
Where are these boats located in Texas?
What’s the cost of a female , white in color possible the ruin
How big do these dogs get ?
Likes great to bad that hull isn’t a little longer , keep up the photos and your skilled workmanship
They merged years ago Minmar Marine Long Beach take a look on yahoo
No it’s zero degree that area is flat works great
Nick u got the that done let’s see photos
They are great
Is penn changing the fathom design at Fred Hall show for 2018 ,seems like prices on eBay are less ?
wtb seeker sd8 rod in good condition
WTB cousins mag 95 !!
I was told the Volvo d4s can not be rebuilt once they are done that’s it ,can’t be resleved
WEFCO RUBBER 818-886-8875 THEY ALL TYPES GREAT PRICES AND ANY LENGHT
I have decided to go with the bronze picked all the material up today , question being the transducer is brass it also should be bonded and what...
Do any of them have barrel guides
Thx I called San Diego marine exchange and they said stainless
Great looking boat glws
What type of Thur bolt studs do you use on divers dream plate , stainless or brass , boat is in the water thx
Nick what’s the current progress looking great
Take a look at prospec you can get a lot more on that reel call kens custom Reéls they are the best
Fg changed regs shiners are out
Looking for info on harnell 723 any help would be great !
I will buy it if he doesn’t let me know steve
From back of house to stern how many feet? looks great!!!!!
Or the reelman / jerry
That's a great buy
I found a 724 thx to funny today I bought a 723 for 90.00 in a junk store even came with a penn jigmaster
there is one setting in a yard behind frost lumber in san diego
What thickness of coosa did you use on the cabin ?
I have 2- d8 40 lb, 1-36 all have been rewrapped black , chrome perfection braced guides butt cord Turks heads never fished after rewrapped cond...
Bump add a new hub kit this prop has less than20 hrs make a offer !!!
Looking for someone in Murrieta area , waterjet cut small psc of 3/16 stainless and weld a few small psc thx Steve
6480 solid 40 lb stick and reel bait , jigs
14 3/4 x 17 viper th 3 blade stainless cons is 10/10 universal hymn was on a etec pickup only 225.00
Don't did it
This owner should sell 10,000 lottery , auction tickets for $100.00 each and winner gets the boat
How do you like your Tahiti surf skiff ?
What was the cost?
25 for the hull
Very nice what's the ballpark cost
How many of these boats have been sold?
What is the beam on the 16 ft radon?
Where do u purchase the foam
I have a 542 full lenght super clean I will sell
Is the road paved to gonzaga and what is the lauch ramp like
I can not believe that this website would allow this drama to continue destoying our relationship with Mexico and making very hard on sac !!!!!
This post should be removed
I heard they got a 340#
Are the bakers 7x50 and how much
What type of hydrilic do u have on a bravo outdrive
Does it have no back feed ?
Looking for some input what is the best mechcanal steering for a bravo 3 yanmar diesel thx
Have you looked at a radon
Let this go it's done
What year tocoma , 17 inch wheels ?
I can't get the Mexico manifest to print ,any help would be great thx
Are they english breed ?
new price $36000.00
Brian I have a very clean , complete 20 ft wilson that I am trying to sell, I mite think about a trade. , Steve
Is it left or right hand
ARE YOU GOING TO A THREE BLADE
Great deal , mine is bullet proof glws
Yes exhaust draining
Yes it is the same on the hose as running in the water , it has never done this , for the setting on the emc I don't know , the oil I am running...
2009 etec 175 hp is leaking as seen in picture motor runs fine doesn't overheat , any ideas on what the problem is thx
Jeff Hull in Ventura great work
Not for sale I have decided to rebuild it
Yes the motor is used has 400 hrs on it ,I built the boat from the ground up , there is a built on check it out
Or best offer!
make me a offer
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
A few items I forgot to list lenco trim tabs , deck lights , 105 gallon alui. Tank
New price $800.00
20 ft Wilson , this hull was completed in 2014 , there is a blog on it in boating discussion , this boat is very complete , 2009 etec 175 hp 400...
Who are the lucky 3 to buy one
Give me a call I am interested in one 951-375-1292 steve
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Pictures of moving house bac
Here are some pictures I moved the house back 21 inches and what a difference
2 man 17 ft expedition kayak , excel cond , oars , seats , dry gear, dry bags , vhf, launch wheels , selling for a friend $800 .00
Does anyone know where to purchase marine plywood with fiber cloth applied on both faces I have seen it , it's out there thx
I have a 24 radon I am thinking of selling needs some glass work great boat
Nice boat who made the rail and pulpit ?
Yes every day
Anchor and bumpers sold
The antenna is 8 ft 2 meter $40.00 it's like new
Bait tank and radio are sold
Or trade ?
Great boat glasglas
Nice a radon where did u find that
yes its gone
You bought the raft 2 years ago new and it is in a hard case ? Thx
Does it have current certs
I have added more pictures
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Yes this weekend I can more pictures and post thx
Some one make a offer I want this gone thx
Yes there is 7 ft of room in there 2 guys can sleep no problem and there is a bow storage under deck in there which is large
Will consider reasonable offers
20 ft Wilson , take a look at the build of this boat on check out my boat. , 2009 175 hp etec 400 hrs. Stainless 3 blade , simrad. Nse. 12 1 k...
12 ft alum . plank , bow bracket. , hardballs , darts , Lilly irons, 3 baskets of line , harpoon 1200.00
Putin her up for sale I am going to redo my radon
Tower tom ?
MH 8 ? 7FT 8 INCHES 50#STICK
Still have it someone pick it up
I had the same thing happen to me ,after I bought a trailer to pickup the hull the following day I get a phone call at midnight on my voicemail I...
New price 750.00
This close width. 42 depth is. 36 ht 74
What sell that!!!!
They want that 70-100 lb fish
Read above biomass is 200 sW that's above and coming our way not 695, probably above the ranger
Great job !
They could have taken a 26 and blocked the back. 2 ft of the mould , how much do they want for it? Buy and build nice hull to start with
I started to build a wheelhouse center console for my Wilson and I changed my mind , 1/2 marine ply and 1 layer of glass , it's yours just pick...
Make a offer I would like this gone
How to ship a 10 ft rod , ups, fedex , usps thx for any imput
2008-2009 blown etec 175 left hand rotation , 25 inch shaft , stainless 3 blade prop, cowling all there in god shape ,great parts motor , little...
I just figured it holds approximate 38 gallons , so I think it's 25 gallons per scoop so 1 1/2 scoops
Are u interested in trading for a or d8 heavy just re wrapped full length cond 10/10
Bottom of bait tank is 20 1/2 x 20 1/2 plus he flange which you could remove and 29 high
2- life jackets new $15.00, 2- numbers new $ 20.00 , 1- 30 gallon bait tank $75.00. , 1-4 lb anchor $15.00 , 1-190 ft 3/8 anchor rope. $25.00 ,...
Wtb harnell 724 full length prefer blank
The plus to a drum winch is u can drop and pull it without going to the bow
Today installed new Lone Star marine anchor drum winch on the Wilson , holds 300 ft 5/16 and 30 ft of 3/8 chain , the dealer in the US is...
Here you go
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
TAKE A LOOK AT THE RODROOM.COM THEY HAVE THEM ITS 69.00 INCLUDING SHIPPING
Yes flat black
How many strikes are normally on the bottom of a 24 radon
It's a 24 Ron radon did the hull it's a heavy , with a yanmar 4 lh 240 hp
[ATTACH] [ATTACH] [ATTACH] Well it's finally done , after the first sea trial it was bow heavy , so I cut the house loose and moved it back 2 feet...
Jerry call kens custom reel
Stockland oval bait tank , 42 gallon , good condition , works great $400.00
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
There is a place in the San Fernando valley that has all types of rubber products for 1/2 the price just goggle that area boat rub rail you...
No formula I do my rods 32-36 inch
24 ft trail rite painted trailer 10000 lb, tires are new , I have bought a new trailer and will be getting it over the next several weeks $750.00...
Wtb lamiglass 528 full length blank or wrapped rod
$550.00 takes it
What is the drain size 1 1/4 or 1 1/2 and is the bottom recessed thx
Trail rite 7000 lb tandem axle will fit 20-22 ft boat , I used it to build my Wilson on , make me a fair price need to get rid of it
Trail rite 24 ft painted trailer 10000 lb, has new tires , it has some rust , needs fenders , great project trailer , 850.00 [ATTACH][ATTACH]...
Are they still for sale?
WTB Seeker 7x blank or wrapped rod
Wtb lamiglass 528 blank or wrapped rod full length
Shot or caught
I have 2400 hours on my yanmar 4lh with no problems at all , it's in a heavy 24 radon , a great motor
Today was the day picked the boat up at Jeff's and all I can say is that they amazing
Sorry I can not spell
Tomorrow is the big day Jeff starts spraying the gelcoat. , when I was up there last friday we found blisters in the hull so we decided to pull...
You have two options regarding the transom bracket , you have the correct one made or you notch the transom , there is a guy on this site that...
Made it up today to Jeff's , it's the first time I have seen the boat since I took it to him , man what a job they have done , they make all my...
Yep Jeff and the boys have the Wilson putting the finial touches on it theses guys really know there stuff , need to make a run up saturday to...
Great looking tank what did that cost and who makes it?
Unreal , is this guy a collector or what
Last time I was up there Harold had just sold a 32 with all the bulk heads in it for 4 k bad as boat
There were probably more 24 ft radons made than any radon style hull , so we're did they all go , I still have my 1988 24 ft radon , rock solid ,...
Does any one know were the moulds went from hf boats they had a 25 and 27?
Go on passageweather.com and animate it for 7 days a lot of the sport boats use it, any where in the world
Looks great , you will enjoy that little radon, keep the photos coming
San Diego plastic
H&F BOATS Harold, Fran Bandon Oregon , nice people I bought a 21 ft boat from them in the mid 90s had no problem at all .
Wayne I will buy them I sent you a pm thx Steve
Sorry go ahead and take them I am a ways off , so how does that hull ride SteveSteve
Wayne is it new
This boat is finally coming together, hopefully it will go to Jeff for touchip and gelcoat in 3-4 weeks[ATTACH][ATTACH][ATTACH][ATTACH]
Wayne I found your rod holders on eBay what a deal what is the inside diameter of tubing for rods SteveSteve
If you are interested in selling your 582l I mite be interested Steve
Let's all call bill 310-621-4085 the guy selling this boat and his buddy Darwin WongWong
Thank god I did not purchase this boat , when I got there today monday around 1:30 they wanted 4500.00 and they did not have the pink slip , so I...
I just bought it 30 minutes ago
What brand of boat was on it
Will you 100.00 ?
Need a little help , I am thinking of a transom bracket, but if I were to notch my transom and use a 25 motor , my transom is 40 inches in height...
Question you are running a 30 inch motor so from the bottom of your hull to your transom notch is that ,how many inches ?
You sold it ?
calstar 6480 with new torium 20
I had the same problem , went and bought 4 mm x 1 1/4 screws , took it on the grinder cut both sides and the top , fit just like the stock...
Today made a fuel tank template , did a drawing sent it to imco got a great price , it will be ready to pickup in 2 weeks just in time to put the...
And you can glass 1708 over it ?
So how would it work for a deck ?
What you using this for?
This has turned out very nice enjoy
Thx how did the hull ride
Even with the hot weather I made it thur it , got the front stringers and bulk heads all set in space , next a little grinding and 2 layers of...
Wayne did you find out how that sister hull to mine ran thx Steve
You are right that is the best riding radon except the 26 triple chim
If you could buy it for 500.00 and take it to the bare hull it mite be a great project
Looks great are you going to rig it yourself?
That would be great , that way I will have a better idea on hp
Very nice are you going to leave it exposed or old school cover
Moving forward, this weekend I got the caps glassed to the hull in the bow and the house glassed to the caps , next will be the rear caps which...
That rail on my radon is all alum very strong
What do you think the weight of your boat is ?
Regarding your take a look at the pictures I posted works great
Depending on power 125 k
This will be a great skiff when it's complete, you will be amazed were you can go in this rig, what is your power going to be
This project is moving like the slow boat to china, I have got the bow caps installed , the house fit , next glass the house to the caps , I mite...
That is bad ass unreal build enjoy
It is amazing how these older boats come back to a whole new life , that Wilson looks great
Wayne that has turned out very nice I bet you can't what
What is the latest can't wait to see this done it's going to be nice
Stockland looks like the one I have great tank
What thickness of plywood should I use for my cap rails and how many layers thx for your help
Looks great how many coats of gelcoat?
What does it cost to build a bracket like that ?
That bracket is very nice
Boat looks great now it's time to button it up did paint or gel coat it
We'll I have been dragging I have got the stringers fitted and glassed
That bracket looks really clean. that is the thickness ,were the out board bolts up, where did you buy your out board, boat looks great
Call kens custom reel in OceansideOceanside
Does anyone have any imput on mercruiser 4.3 mpi motor and what drive would you use
What size is your fuel tank
That tank looks great, how are you feeding the water on the inside, tube with holes?
I would hang it on a long rod and fish the slide oh boy
Thx, the plywood on the house 1/2 inch, 3/4 inch ply on the top, plywood is battic birch marine grade 9 and 13 ply, which you buy at weber plywood...
What thickness of material are you using on your bracket?
Your work is great, you went with Etec let me know how that motor runs
Wtb clean truline TNT blank
Nice job great viedo
I have a M&B 2 piece suit long johns and pull over top with hood attached , 1/4 thick in good condition let me know
Thx for the offer but that is not the one
Would like buy a new or used furuno 1622 dome cable uncut
Scout give me a call 951-375-1292
If you don't sell it let me know I am located in Murrieta
No Facebook only bd
Squidco / kens custom reel
[ATTACH] This week end I got the roof glassed and installed and put finial coat of glass on the outside next I will flip it over and get the...
With the wet weather I decided to get the wheelhouse started
With the wet weather I decided to get the wheelhouse started
Wayne can you get me the info on the bracket thx SteveSteve
Yes I am open to looking a bracket, what do you think the difference is between a bracket and adding on to the hull thx SteveSteve
Ok I am thinking about about adding 30 inches to the hull then it will be a full 23 ft
So your fuel tank is located in front of existing motor box bulkhead port to starboard ?
Thx for the info it's right in front of the engine bulkhead
That is a great project you are doing work looks outstanding, I am putting a 20 ft Wilson hull together I have. Question how far from the stern...
Thank you for the info , what is the depth of the splash well ? thx Steve
Great looking project I am building a 20 ft Wilson my question is do you know how wide the transom notch is ? thx Steve
This weekend I got the other 2 layers of plywood on and 1 st layer of glass , I am going to put a out board on this skiff , but I need a little...
I use the baja special on my 90 j , had kens reel go thur it spins like a dream great reel for 40-50 lb , with enough drag
I use the baja special on my 90 j , had kens reel go thur it spins like a dream great reel for 40-50 lb , with enough drag
[ATTACH] [ATTACH] [ATTACH] I started another project , I bought this 20 hull on craigslist which you probably saw , it had been setting since the...
Looks great what is the be
Wtb furuno rsb0071-57 radar dome in good condition thanks for your help SteveSteve
Looking for a furuno rsb 0060 dome in good condition thx SteveSteve
I need a cut out template for bravo 3
Andon , your work is top notch, I have owned a 24 since 1986, I would like to find a 26 hull for a project boat any help would be great thx steve
Thx bought one today from paul
Looking for clean used Furuno GP-31 , GP-32
Try Ensanda Boat Works, they built me nice 23 hull with deck, center console for 6900.00
Looking for a moblie welder to do some welding on aluminum swordfish plank ,located in murrieta, if interrested please let me know thx steve
DOES ANY KNOW WHAT HAPPENED TO LEANING POST .COM ? IT LOOKS THEY ARE GONE FROM BD
WHY ARE YOU SELLING
DOES ANYONE HAVE A PICTURE OF A 23 BLACKMAN WITH A SWORDFISH PLANK OR SOMETHING CLOSE, THAT I COULD LOOK AT, THANKS FOR YOUR HELP
I NEED A NEWELL BASE AND CLAMP FOR A PENN YELLOWTAIL SPECIAL IF ANYONE HAS ONE THX FOR YOUR HELP
1982 BELGIUM BROWNIG, 12 GAUGE, B-26 BROADWAY MODEL, OVER UNDER, TRAP GUN , FULL AND IMPROVED CHOKE, COND. IS 100% , THIS GUN IS BELGIUM MADE,...
oh the reel with the secret knob
BELGIUM BROWNING 12 GAUGE , 30", FULL CHOKE, CHECKERED STOCK, MADE IN THE MID 80 s, THIS GUN HAS NOT BEEN FIRED, COND. IS LIKE THE DAY IT WAS...
THE APOLLO IS OUT THERE RIGHT NOW ON A 2 DAY , NOBODY REALLY KNOWS , LETS KEEP OUR FINGERS CROSSED, TITE LINES
NEW AVET HX, STD. WIDTH, 2 SPEED, MC FRAME , GOLD, WITH BOX, 375.00
LOOKING FOR A GOOD , HONEST MERCRUISER MECHANIC, IN SAN DEIGO, RIVERSIDE AREA, THANKS FOR YOU HELP, STEVE
I WOULD LOOK INTO THE MATERIAL CALLED DURALAK, IT HAS GROUND UP RUBBER IN IT AND IT COMES IN ABOUT 16 COLORS
LOOKING FOR SOME ONE TO DO , GELCOAT WORK AND SPLATTER FINISHES, PLEASE LET ME KNOW THX STEVE
WHO IN SAN DEIGO COUNTY CAN SPRAY ZOLATONE GELCAOT, ANY HELP WOULD BE GREAT, THX STEVE
WANT TO BUY PENN / TIBURON YTS 4-0 CLEAN COND.
32 HIGH, 35 WIDE, DEPTH17
2- PROGEAR 545 REELS , NO CLICKERS , COND 9/10 165.00 EACH
MERC BIG BLOCK HEAT EXCHANGER FOR 2002 AND UP $400.00
BLACKMAN 60 GALLON OVAL TANK, COLOR OFF WHITE, 4 ROD HOLDERS , NET HOLDER COND 8/10 , $400.00
you want to talk to reelman on bd, he does these kits
LOOKING FOR A TIBURON - NEWELL 332 FRAME TOPLESS THX STEVE
looking for 2 clean penn- newell 4-0 yellow tail specials i will be gone for several days but call me on cell 9513751292 steve
I WANT TO BY 2-TRINIDAD 20 HANDLES, IF ANY ONE CAN HELP , PLEASE LET ME KNOW , THANKS STEVE
2- gold progear 545 reels cond. 9/10 serviced by ken corwin, they both have wiffle ball handles, no clickers, 150.00 each
2-p533f aluim. spools, 2-p5333f aluim bases, 4-p533f aluim center bars, 1-p533f handle , all in excellent shape, 125.00 takes it all
no they had a 100 for sunday
1- P533-5.5 NEW 150.00 , 1- P533-4.6 NEW 150.00 OBO
bravo 3 outdrive complete, both inner and outer gimbal housing, upper and lower leg, stainless props, ready to be installed great shape 4000.00
just take the 80 and double it inside the 135 about 7 feet and serve it and you will not have a problem
want to by san juan mc330 fresh water cooling system or equal, for 1999 mpi 454 mecr thx steve 951-375-1292
2004 MERC 115 4 STROKE PARTS MOTOR, MID 80 ,S MERC 350 INBOARD WITH FRESH WATER COOLING 300.00 TAKES BOTH
still have 1 cui120 rod , wrapped cork tape, turk head 50.00
harnell 542, rewrapped black, butt cord , clean 225.00, newell p533 5.5 f new in box 150.00
2- cui 120 cut to 10 ft. cork tape, wrapped in black 50.00 ea., 1-calstar 700h cork tape, wrapped in black 80.00, 1-calstar 800h butt cord,...
2004 merc 115 4 stroke, long shaft, 1 bad piston no trim pump, no computer great parts motor
mid 80 merc 350 motor inboard
300.00 takes both
you an call on my cell if you have questions on these rods steve 9513751292
2- cui120 75.00 each cork tape perfection guides
1-calstar 800m butt cord perfection guides 100.00
1-calstar 800h butt cord perfection guides...
his name is jack hill, willfish tackle, in northern ca, the shogun will have his phone #
2004 MERC 115 4 STROKE MOTOR, 1 - BAD CYLINDER GREAT PARTS MOTOR. MISSING POWERTRIM MOTOR, COMPUTER $500.00
2005 HONDA XR400 - LARGE TANK, PIPE, HEADER, 8" LIGHT, BAJA DESIGNS KIT, STREET LEGAL, LIKE NEW $3500.00 951-375-1292
WTB 1 Newell Narrow Yellowtail Kit Spool 4 - 0
SKB medium box, needs latch & lid $ 25.00
wooden tackle box $ 25.00
Tiburon narrow 4-0, progear handle $140.00
Newell S338 - 5 $85.00
Newell C332 - 5...
do you know any thing about the harnell blanks at rons bait & tackle ?
they are at the hurricane bank , not cow town
i have a 23 ft ensanda boat works panga forsale go to the boat section , check it out
Separate names with a comma.