I got one of these, it will start anything with heavy duty clamps
Cost more money than most others for a reason...
So this is what a drunk boater and sexual assailant looks like?
Gary Vanderlike's Asshole Invitational, I won Asshole of the year award, Spike.
Well deserved too! :)
Jesus, Girth, Gary, Ty, & Jack...
I ask the crew if they want a fish, it seems they always do.
Best way is to glass it in and gelcoat, starboard is too soft IMO
This stuff looks like it would work, I got some samples at the same place I buy...
3m citrus adhesive remover
Hopefully you hook a lazy fish
Sold the storage boxes, two Acrylic doors are still available
Ask your mechanic, a lot of times they need a trailer to pick a boat that's in a slip. He probably already has one but you never know until you...
Hey Gary, have you fished the Tern for wahoo yet?
From the recent reports on the RP, a passenger took these with a drone.
Everything I see is from 2006
X2 on the Cyclone
I fished with this combo a couple weeks ago with 25# mono and a bass rod (thanks John and Mike) what a blast!
I'm on the next RP trip, I doubt we will fish these on the way down but we've done it before. Just caught a few for the galley. Maybe on the way...
OK since you figured it out....can we start with the jokes?
What website were you using?
Have him send you proof...if its you with a pile of...
So I thanked to my buddy this morning and asked about his symptoms, he said the same thing Chote said “no symptoms”. He found it because he has...
You didn't mention the dreaded sandfly.
I don't know for sure but next time I see him I'll ask.
I have a friend who ate so much tuna, 4-5 day a week, he has mercury poisoning.
He doesn't eat tuna much anymore.
Yes, Danny usually does all the scheduling. He’s probably fishing.
Osuna's have a boat that would work for that.
Anchor Marine Canvas in LB
Dan Shannon - Stainless Specialist
email: [email protected]
The pilothouse and caprail come out of the mold as one piece and then fastened to the hull with pop rivets and urethane sealant. If you look at...
How much are these mythical jewels selling for at the show?
This boat has lived is the water it's whole life. I thought it had to fit in your shop? For sure the trailer won't fit .
[ATTACH] [ATTACH]Bill 805-637-6898
[ATTACH] My buddy is selling his Radon, it’s in Oregon. He’s got it rigged for crab and salmon (and towing). Not sure how long it is, used to be...
Crank it up!
You can't do good fiberglass work when there's permafrost on the ground.
Almost everyone in Alaska can weld.
What kind of power?
I like the name too.
Thanks, I tried Tony but he's out on a sea trial, I'll have to wait until tomorrow.
I was hoping someone here on BD might know someone more local...
I need to replace the risers on two Cat diesels.
Does anyone know someone in So Cal that can make these?
Longest Zip Line in the US
Jamie, I checked out the link you posted for UC looking for a new 80# stick and came across the Xtreme Composite Trope.
You seem to know a lot...
How did those treble hooks hold up?
I saw this posted on the RP reports from Taka's trip.
Supposedly it out fished everything else on the troll.
Got any idea what it is?
It ALL fits right here! The LOChness Monster.
I got a new 12visx and the photo of the reel showed a knob "football style" handle but it came with the long handle.
Can I get the "football...
We've stayed at the Andaz there in Papagio Bay and fished out of the harbor, beautiful place.
Are those Dorado tied up? I've never...
The seas were 18'+ with gale winds from the southeast through the weekend.
We had gusts to 60 mph and higher across the mountain peaks, that will...
My buddy had a 50' sailboat on a mooring there 15+ years ago. A gnarly storm came and sent 14'+ waves through the moorings. He wasn't on board at...
I was wondering if he's one of the 4 guys fishing or playing cards.
This same charter one time had 11+ fish over 300#. I talked to one of the crew...
The weather and the bite continued to be excellent but many of the anglers in this group were enjoying a much deserved break from fishing and...
You've got this!
Congrats on the personal best!
How big? 60+?
My buddy bought a 285 Conquest Pilothouse last year from a dealer in Washington. It was a '17 that didn't sell, almost no hours, no trailer and he...
3/4" ply is too thick, by the time you add glass to both sides you'll be close to 1".
Use 3/8 or 1/2". Check with your local glass shop to see...
80# seems to be the new 130#
Why or how did they kill those halibut?
It's nice to see Jerry is still kickin' it. I fished with a few trips with him when he was in his early 80's. When I would call him to order line...
Quick Google search came up with these in your areas.
My T-shrit guy is now doing vinyl wraps and does the lettering for all the boats in...
It was a 1997 2520 DV with an I/O diesel. The dealer, Blue Porpise Marine, did it. They didn't do such a great job so I redid it, gelcoat, ran a...
I had a cabinet builder friend of mine make some shelving out of starboard that screws to the underside on both sides of the house.
Those pipes look almost as bad as your avitar
Do you remember this one?
There was a bad storm that night, I thought for sure he would take it south of the boarder...
Do you mean flush gunnel mount rod holders?
If so, make sure you get ones that are welded not just pressed together.
You must really hate cockroaches :)
Dumped the Intrepid trip for half price and jump on this one!
Good luck Soda
Have you ever fished with Don Burnside before? If not your in for a surprise.
He fills two dock carts with his shit, FULL. Whatever you need he...
I gotta say, that whole pile in the first picture looks like a mess and the second doesn't look much better. I've never seen Hybrid Mutu's, is...
You know you don't have to order 5000 each, just enter the quantity you need.
Best to call them.
Gotta be Aftco tighty whitey!
I'm a commando guy myself. TMI?
just upgraded to a 3x7osp and a black man 50
Please, I'll admit it, lack the inside jargon. What is this? I think I must want one?
Trophy shops do engraving, look for one near you.
Do you have a Racor/Parker pre fuel filter/water separator?
If so you may not need the 860874-7.
If you don't roll up the isinglass ask him about EZ2CY. It's much more clear and last a lot longer.
X 2, took my boat from Santa Barbara to have him do mine.
I know you never see conditions like this on the east coast but the Pacific does look like this sometimes, especially this time of year. It's been...
Pic from the RP website
I got a 45 last summer and a 145 when they first came out. That thing is a beast but fits perfect in the bed of my truck.
I like that they have...
RTIC is having a 25% off sale on everything. Enter promo code FB25 at check out.
Not affiliated, just passing along a good deal....
Fit the starboard with fasteners and mask the perimeter. Remove the starboard, put a bead of silicone around the inside of the taped perimeter and...
So how much did it weigh when you got home?
It looked bigger than 18kg to me.
Trinidad 40A? 2019?
The arm is longer and the handle is bigger. Best upgrade you can do for the 16.
It seems to me they should come from the factory with the bigger...
Get ahold of Rick, he can set you up right in Playa Samara
Capt called his code guys, they said with all the wind we've had the water rolled out there. Lots of fish but no bitters.
I'm ok with wherever the...
Our change of destination gives us four days of travel and two days of fishing, I wish we had a couple more days.
I'm on the Seeker trip leaving tomorrow. I was told we're going to the Ridge, that the fishing at the Lupe sucks right now, more sharks than tuna....
Not my call but if it happens I’ll be prepared.
Our trip leaving Thursday scheduled for the Lupe just changed to the Ridge due to poor fishing. Wahoo and tuna with a variety of everything else...
Tell me about the handle upgrade. Penn or ?
Your gonna need a drain plug in the bow of that bass boat :)
You should be crimping those long aluminum crimp three times with the pliers your using. A long time crew and master rigger once told me when I...
Yep, my rule of thumb is anything under 13 seconds is wind related and not too comfortable, anything 13 seconds or over is usually a ground swell...
I had one blow up when I hit the start button, big bang.
What a mess, luckily it was contained.
It was an old battery on a charger, my guess a...
How did "YOUR" patty get in MY OCEAN.
If i see you fishing it again you better split fast, I know where my gun is!...
Is this what your talking about?
Are you keeping "Got Bait"?
Galvanic potential of common metals. Source: Solar Professional
Check out this chart, Platinum being Noble and Zinc/Magnesium Active (anode...
There is NO washdown at Shelter Island and a lot of other ramps.
Garden sprayer might work if it's really important to you.
My friend caught this one this morning on the Endeavor, tape out at 295. There were at least five more laying on the deck in other pics.
Uber is an app on your smart phone you set up an account with your CC. When you request a car you can ask for an SUV or whatever.
We took an Uber from the airport to the landings once, the guy was driving a Suburban.
My wife's sister lives in SD and she's taken the the train a couple times. I takes like 6+ hours from SB and that was just to Encinitas, lots of...
Sulfur and battery acid smells like rotten eggs, check your batteries.
My experience...I did a job for the Nature Conservancy at the adobe house in the middle of Santa Cruz Island. I loaded up the contractor, my crew...
If your having trouble getting the kite to fly in clean air behind your boat, the downrigger is going to be a problem. Maybe you could use it on...
The BF are eating mackerel right now.
What are "nylon locking washers"? Are you through bolting it or just screws?
I would through bolt using Nyloc nuts and 4200, no need for 5200 or...
I've used single phase automotive paint, it hold up great. Chevy white.
There is no liquid, it's probably just seperated like paint will. Stir it and you should be fine. Those pen torches are worthless. Start applying...
Check into Global Entry, gets you through customs quicker and TSA pre-check.
My buddy got a 240 about a week ago on this one with an Owner 9/0 Offshore and a spider hitched 130 mono for leader at 50'.
Truly an exploratory trip.
I caught my first marlin just outside the kelp beds at Yellowbanks fishing for yellows during the El Niño of ‘83....
Thanks for the report Frank.
How far off the island were you?
I was told the black was for high heat like you use for brazing with gas torches.
If the white flux gets too hot it disappears, it works fine for...
I read the solder post a while back but i don't remember if anyone ever posted a video.
This is a kit I put together a long time ago. I met a guy...
Get a slip, problem solved.
Your fucked. Storage yard!
It's the new gestapo state/world we live in.
We stopped at Pelican Bay to BBQ before we made the crossing back to SB, While on anchor we were...
I have the same problem at our driveway approach, I even removed it and replaced it with a new ramp with less angle. Still scraped. Like others...
I thought we were talking about filling a Mak 20
Can you backup this statement with some proof please?
80# is overkill for a 30 top shot.
50 or 65 would be better.
Order online and start winding, tight
If your boat is on a trailer take it to a car stereo shop near you. I'd recommend looking at WetSounds speakers and amps, built for the marine...
Stephen, didn't Harold Davis work at Innovator too?
I order directly from Spro but they're not s/s.
AFW makes s/s swivels...
100# spliceable hollow to the top
If you get a break or nick in solid you're screwed, tie a couple over hand knots and hope for the best. In...
I just don't trust spectra tied direct to hooks, jigs or hardware no matter what knot you use, it's too skinny and slick. It's best to have mono...
I read through most of the posts but I never saw how Travis lost the fish. Was he spooled, did the spectra or leader braek? My guess would be the...
My last two trips the message from the office said...
We are very excited to announce that your trip will be heading to Guadalupe...
I used to buy resin and gelcoat from George. He made the mold for the 17' and maybe the 19' if I remember correctly. RIP George
Which 4 cylinder diesel are we talking about? What HP?
Thanks for the reply.
I called Penn parts department and was told it won't be in stock until late September, maybe. Bummer for me, my trip is in...
Has anyone changed the stock handle on the 16 to the larger 20-50 handle?
If so where can they be purchased?
The Mustad 20/0 is my go to hook, no off set or sharpening necessary.
I also like the Eagle Claw L2045R 20/0 and if there are no sharks around the...
I went through the same thing last year, it was the reversing relay mounted next to the windlass. Check all of the connections first, these things...
The new Accurate "Tern" looks like it will be a good one...the TX-500x...$300.
Nice box! To me it looks to be top heavy, especially with the rocket launchers mounted so high. Make sure you lash it down to something, maybe to...
The Pounding Factor...I bought a new Parker in '97 with a diesel and it didn't pound like some people post about. I though WTF, maybe they just...
Gotta pay for those new engines some way :)
My friend fishes SD a lot in the summer and carries his own water and pump in the back of his truck to flush and wash down. Something like this......
A good way to learn how to use the radar is to leave it on during the day and compare what’s on the radar to what you see. Learn the settings.
Rumor is they caught an albacore while fishing for yellows west of Avalon.
I'm like Fishy, I like all mono in the water but when in BIG fish territory I use 130#. I've caught some nice tuna when trolling for wahoo. I use...
The RP boards by 50% deposit and it's all good. The crew takes your gear out of the carts and onto the deck. While they're doing that, your...
My norcold went south and the model is discontinued. I took it to several refrigeration guys and they all said get a new one. The problem is that...
I got a couple of these for my birthday to use in the motorhome but they look perfect to use on a LR trip.
Is the company Baitball bait receivers still in business?
There are a few of them on my dock coated with growth inside and out.
This sea chest came from Parker on a 28'er. Connect anything anywhere with one thru-hull.
Any plastic fabricator should be able to make one for you, just take the old one in so they can match it. Here's a list of some in your areas....
Another factor is the length of the trip. On the shorter trips passengers will be at the rail 24/7, on the long trips after a few days of...
Is it pressurized?
Was that a Bubba Blade?
Wow! I hope he's OK and makes a speedy recovery. I know how much he loves LR fishing but take care of your health first. I'd hate to hear of...
I don't know how far you are from this shop but I'd trust these guys for sure.
I've fished LR on some of their charter trips and they know what...
Call the phone number "Richard" posted.
Is Rudy going to hook you up?
Nice looking box if so
Hey Don, were your ears burning?
This is the box or one like it that Richard Vantine was referring to. I always knew him as Rudy.
Is this what it looks like Rudy?
If you find the right boat, your dream come true, don't wait for a slip, buy it.
You can always do the guest slp thing until one comes along....
Albe = 11' beam
Cabo = 12'5" beam
Wider is better.
Do you make your own guaro?
It sounds like you never rode the Q105!
You might find some useful information here...
This isn't the way it's done on the LR...
Is this what your asking about?
My neighbor just put 6 of these in his boat. They look pretty good, no bonding necessary and you can do any repairs to them without a haul-out....
Some of you guys crack me up.
Since when is heading straight into 25 mph winds and 12-14' sea relaxing? Bouncing off your bunk and slamming into...
Oh believe me, I smothered that crap all over any exposed skin, wore long sleeves and pants after I figured out what the hell was eating me.
To be honest, I couldn't do it. Everyone says they're good when fresh, but I don't eat the bait :)
We've been on the south island for just over...
We’re in NZ right now.
I’ve learned all about “White Bait”.
A bit stormy at the moment.
This is why I prefer the fly home option, been there, done that.
After we dropped off our passengers, we are headed home. The...
They made a custom tackle drawer and box for me a few years ago and recently made matching doors. Great people to work with.
WOW. I knew he had a bad ticker but I thought he was doing much better. Sorry to hear this.
He was always there to help me out with my small...
It's looking real good! Bill got his first over 300, congrats.
Did you see that Dr. Edwards lost his rod overboard...again?
I've fished with the Doc for years and this is at least the second time he's lost a...
Back to the original question...JMO, but I think you should save your money.
It's your first long trip, take the rods and reels you have and use...
Simple Green or Dawn dish soap
And poof he’s gone...again!
Surg, I was always told that putting batteries inside the cabin was a no no because of hydrogen gas released by the batteries, even seal...
I have two storage doors with Starboard frames and 1/2" gloss white acrylic plexiglass doors that come with slam latches. $75 each...
IMO...old and under powered.
Otherwise it could be a good opportunity to get the feel of a bigger boat at a good price. Have you ridden in this...
I remember that day, Mike accidently put his 80 ATD kite reel on an 865xh.
About an hour into it and that fish was kicking his ass!
apollochartersWords can’t explain the type of trip Chris Yamada and his group just had down here. Very seldom do you catch a super on a...
apollochartersWords can’t explain the type of trip Chris Yamada and his group just had down here. Very seldom do you catch a super on a...
Did you put a bend in them?
I would think these are made specifically for those Guadalupe tuna and local bluefin. Just a thought.
I'm sure you've done your research but I remember reading this on THT...
I owned and ran the albemarle 99/2001 seasons Great rough water vessel...
Was Josh Temple involved?
This has some very cool features, if your into it.
I would think that all the electronics companies will be doing something like this in the...
200# is on the reel to the bait. If the wind is light there will be a lot of belly in the line but if the wind is 15kts + it's all good!
65 or 80
Diamond blade on a grinder.
Pompanette bought out American Marine who made the windshield for Cabo and many other manufactures. I had them make a new windshield for my boat...
Your installation looks clean!
The only thing I would have done different is to install it more towards the bow. I like it about a foot or two...
Look at this shitty boat without a bow rail! What were they thinking?
And that low freeboard in the stern???
Looks like a death ship...
I originally put 1200 yds of JB hollow I then took off about 200+ yards.
I use it for a kite reel and sometime when you have to reel really fast...
I have an Andros 12slla and have caught a lot of wahoo with it. You don't need to shift into low gear, I can grind them in with it in hi. I used...
A few things you might try first are Soft Scrub, Bar Keepers Friend and Magic Eraser. If none of those work try acetone. Most likely paint will...
Have you tried to aggressively clean it? It seems odd that you would want to paint it because of scuffs, especially inside the pilot house.
Just to recap what Bill has said, he uses a nail knot so there is a serving on the connection. I won't put a leader in the water without some sort...
One and done!
I did one for a friend with a short insert and glue, he hooked a good one and the thing came apart. Maybe I didn't do it right but...
All of this BS over what amounts to less than $50?
If the OP read the terms of payments he would have noticed he was subject to a $250 booking...
Just do a little search of the OP if you really care to find out which boat.
Your reservation will be confirmed with a 50% deposit....
That 3x5 is a beast!
I have an 80 on mine, just lay it on the rail and turn the handle.
I got a RTIC 145 to replace my old Igloo 124. This is my second RTIC, I also have Yeti’s and even a Bonar.
I like the price of the RTIC vs others....
They don't have shit in stock at HLS, try Eric's in Ventura. He has a good selection and can order whatever you want.
How good are your fiberglass skills?
Yep, one of the few places around that rent a room by the hour.
Your on the right track.
Take the 130# spectra off the 30 and put it on the 50w then top it off with more 130.
Fill the 30w with 100# spectra to...
You could modify your pulpit to something like on this Cabo.
This was done quite a few years ago but they do great stainless work. They make the railings for Catalina Yachts or used too.
Send them a copy of...
It's really looking like an Anderson/Greenough now!
I had this one built by Riley Marine Services in Long Beach
600 acres and 2100' of beachfront for 2-3 Mil? Sign me up!
My buddy sold his house on the beach right next door a couple years ago. Not sure what...
I took these pics years ago when this post started while cleaning up after a LR trip but never got around to posting.
Thanks for updating...Gotta...
That looks like the boat Donnie built for himself to use up at Lake Nacimiento.
You should call him and ask... 805 692 2170
Anchor Marine Canvas
6400 Marina Drive
Long Beach, CA 90803
Congrats on your personal best Rick.
Got it, when we were on the boat it was just a big V-berth in the bow.
Nice report as usual Alan. Congrats on the big fish, is that your personal best?
I have ridden this boat a couple times with Scotty and Roberto so...
Nice Video Big Nasty! :appl:
What was in the purple bag that went overboard?
Week 28 is usually the second week of July, this year it's the 10th. Wednesday to the following Tuesday. We drive up on Tuesday, sleep on the boat...
Our kids are grown now and have other interest so after many years going to the lake, we're selling our share.
This is a prime summer week in July...
The culprit IMO...
They were able to get more than a few of my favorite local spots closed forever....
I don't think you've been here in a long time. We've had the Tea Fire and Jesusita Fire which have pretty much cleared the foothills in the last...
I have a lot of family in Carpinteria and I'm not positive but I'm pretty sure my sister in law's house burnt down last night. They...
I got one of these when I got my current boat in 2004. I has everything in there.
Before that I just used a note pad. It's cool to look back...
If it's really that important, the fleet needs to get together and launch their own satellite and park it right over The Bank. That is, if Mexico...
Also announced at the show – a new model from California builder Mag Bay Yachts. Their 33 Center Console has been making waves all over...
A buddy of mine once asked "what was the difference between rebuilding an old boat and buying a new one?"...his answer...about 50 bucks.
To me it looks like the gaff holders are made of Starboard, if so no tape or adhesive will stick to them. Maybe screw them to a small block of...
I thought this picture was a pretty good example of what Bill is talking about.
WOW...what's next, a supermodel girlfriend?
Good call, I'll call them tomorrow.
Thanks, I saw that but unfortunately it comes in 32x54" pieces and I need 33x34" in most of the areas.
The insulation in my engine room is coming off and I need to replace it.
What I have in there now is 1.25" thick but I'd like to use 2". I've look...
Are there two?
Hey Rick, are your going with us on the Seeker trip again?
There's a real good chance we're going to catch some sharks :)
I just got a text from Jonathan that Pleger (on a shark research vessel) got a 200 lber yesterday on the kite.
Break out the heavy line!
I like the Carolina bow flare!
Just wondering, what's up with the 2x6 around the roof?
Congrats on your personal best!
Some of the best welds I've ever seen and he's close to you.
SD Fabrication Inc
37728 110th St E
Littlerock, CA 93543
Contact: Steve Devoll...
Long before there were MPA/MLPA's the no fishing reserve at the southeast corner of Anacapa has been enforced, just like the one at Avalon. We...
Catch it on bait? :)
Abercrombie & Kent are top shelf, you'll have a great time, we did!
I'm taking time off next year from LR to take my wife back to New Zealand....
Private charters, they don't list them on the schedule.
Any other rigging techniques?
I'm liking the treble stinger with wire.
What about currents?
Check out this link for the currents off the east coast, I would think that strong current moving up the coast is the gulf...
We were at Guadalupe last year when the remnants of a hurricane passed through, lots of rain and moderate wind. Take a rain coat.
The fishing was...
No shit! with 32 passengers all going to one of the three. Three scales on deck, ten guys from each processor down there handling the fish. The...
You know that "boatside" unloading of your fish into the slush bins has been around for more than a decade, don't you? 5 Star started doing it...
You already have the decal off now you need to remove the adhesive. This is the best one I've used.
3M Citrus Adhesive Remover
I did a little shopping for you,,,
Furuno FCV588 8.4" Fishfinder...
Looks good. I always wondered why they don't make the door slide.
I had a 2520 and that was next on my list of modifications but sold it before i...
And anchor it up outside of Cedros
Me too, pick up the deck hose and wash the blood away so no one slips while the deck hands are busy helping other passengers or help gaffing when...
On the long trips RSW is not an option so C&R is always good. If it's a trophy, freeze it whole and weight it at the landing. The processors will...
I'm not at all an expert by any means and please correct me if I'm wrong, but I was told we can only fish in the areas below Red Cinder...
Hey Ali thanks for the detailed description.
Any chance you can post a picture of the bottom? I take it you stick the hook through the tail like...
Can you snap a picture of this outside the hull?
I like it!, what all drains into it? Decks too?
I'm rigging up some Yummee's and I found this video on line.
I'm pretty sure this is how Justin on the Excel rigs them.
I was wondering if anyone...
Is it, or are you just "That Guy" ? Entitled and special?
My buddy has been trolling these for years right along with the Marauders, no skipping but he trolls them way back. They catch tuna and wahoo.
Got me a Romper
Is this a 3/0 or 4/0 size reel ? it's hard to tell by the picture.
It would be cool if Okuma made a reel to fill the void left when Shimano...
Not positive but I don't think they've figured this whole mess out yet?
– The decree establishes the general rules, effective immediately after...
We left early this morning on our Pelagic two day trip so we could be on the tuna grounds by lunch. I can honestly say that the bluefin population...
We left early this morning on our Pelagic two day trip so we could be on the tuna grounds by lunch. I can honestly say that the...
Nice report Doug!
The fishing has been tough this year for sure but I know you guys make the best of it.
Did you get that hot tub set up? I'd...
I'm sure you're totally prepared and have read the Shogun report...
"If you are on an upcoming trip bring 20 – 60# setups"
Steve and Mark, you seem to know all about this stuff...
Which boats offer Fisherman's Processing pick up boat side?
The Indy, RR, Excel,...
To the original poster, have you asked your crew to help bring your gear up from your stateroom and help load a cart for you? The red...
RP ready to hit the dock
This pic gets my blood flowing...
I ordered a new winshield from these guys, they can make it any size you want.
I had them make mine about 6" taller than the stock one that came...
I've got a Yeti story...
McGrath is right between Ventura Harbor and Channel Island harbor.
I think it's closed right now so check...
You might want to post your questions here...
I'm a fan of the Furuno products and this one would fit your boat nicely under budget....
Sunday am weather and current permitting.
An old hillbilly farmer had a wife who nagged him unmercifully. From morning till night (and sometimes later), she was always complaining about...
"I'm getting a 7'6" UC Invictus wrapped right now"
I thought you were looking for a reel for the rod your having wrapped right now which is a 130...
Not a fan of the wide reels for bait fishing.
I think you should try what you proposed (without the elbow) and see if it works.
Just use a longer semi-rigid hose that will go all the back of...
If your looking for a reel for an Invictas you would use the 30 or a 50.
IMO, a long range quiver is not complete without a 50 size reel.
It seems like Joe is always hooked up, no idea why he would use it.
Got any extra spectra?
Notice how there's only a few guys at the rail.
I think I forgot something once but I can't remember what it was?
I got one of these when they were having a warehouse sale a few months ago. I really like it....
It depends on the time of day/traffic, it could take longer. It's about 100 miles and if there are two of you, you can go in the carpool lanes,...
Another option to releasing fish or handing off, ask a crew member if he wants a fish. They are out there all the time but they don't always get...
- I am a “lefty” do they provide left hand reels or do I need to buy it / rent it elsewhere? If yes, where?
You will be hard pressed to...
Mark Plastics (marine windows) at 951-288-6351
The RP reports they had wide open wahoo fishing a day before they got to their fishing destination.
We had limit style Wahoo fishing for our...
If you've got the room this might be a good alternitave.
Good to know, mine is at least 4 or 5 years old.
My Buddy had his new F250 Power Stroke stolen last week right in front of his house on a quite little street. At 4 am his wife heard some noise...
It's almost impossible to find a D rated tire in 14".
Kumho Radial 857 is the only D rated tire I've found, it's for big rig truck trailers.
Does he have a passport?
I've heard good things about the Liberty 3/4 day boat, 5am to 5pm.
Not a whole lot of trolling at Guadalupe.
The 30 would work fine for dropper loop. I use a Mak 20 with 100#
Probably too late but I sent you a PM.
I meant a guy yesterday that's on this trip. I was supposed to be doing a job walk for a remodel to his house. When he saw I was wearing a shirt...
Ok, here's my thought...the last couple years with three boats fishing the Lupe on a regular basis and occasionally a fourth (the Apollo) and no...
He sure could spin a good story.
I have a 7470xh and have caught a few fish on it, more of a parabolic bend to it.
The 770's bend towards the tip more.
Just curious, is this the fuel polishing system your selling?
A sea chest would be nice. Just one through hull for all of your saltwater pumps.
I believe this is an option from Parker.
I've made a couple boxes in the past and used the Sugatsune STF 40 draw latch, small profile and very strong....
Can you post some pic?
10+ years ago I made one out of 8" PVC and by the time I bought all the materials and my labor this would have been a much...
This should be a trip of a lifetime for you with only 14 guys on board.
I fished with this charter several years ago and had an awesome trip.
Sam, Jeff Dubois, Jesus, Bacon, Brian Sims, Jack Webster and John Kline
That boat produced a lot of fine captains.
Check out image #14
That's funny, I was thinking the same thing about you guys using north up on a plotter and can't read a compus.
When I'm going to a waypoint on my plotter I don't want the cursor on my starboard or port, I want it aiming right at the pointy end...
Have to be?
There's nothing like it!
When I'm on the beach all i think about is getting back out there.
Nice! I'm sure Steve is stoked. Is that his personal best?
How was your trip David? Catch any big ones?
Wow 500hp out of a 3208, I din't know that was possible.
I think his 375 hp's a kind of small for that boat, he should take your advise to up the hp.
This is why the Intrepid stayed tied up at the bait barge instead of heading south on their 15 day trip.
SE winds gusting to 42 mph,
The buffer zone around the Tres Marias Islands is where the multi day boats out of PV fish. Home of the Giant Yellowfin Tunas.
As soon as I saw Tim post this I checked air fares and found round trip flights from LAX on those date for $215. I've never seen them this cheap!...
It's got squid on the bottom!
That's messed up they cut the wiring, that's just being lazy.
What HP are the 3208's?
My wife and I went through the same dilemma a few years ago when we went on an African safari. We had weight restrictions with our...
What kind of board did you get?
I'm a Burton guy myself, 169W Custom.
I've fished with Stas a few times, never saw him take a knee.
I don't have anyplace to mount a davit and this thing will sink to the bottom without it. Plus I have a hot dock, electrolysis would kill this...
Perfect! Add a rock cod plate to the fore grip and it's golden.
My buddy had an 18' we took to Baja a lot. His had a Merc 55 if I remember correctly, plenty of power.
My buddy got a Kamikaze in the dark.
We both drop in a puffer right next to each other in the stern and follow our baits in the current to the...
Very nice box!
How much dose this box weigh?
I hate wind!
Parts of the day, we only had 2 anglers fishing, and they were on the kite. It was tough on our group to stay at the...
To me it sounds more like the way the fish was treated on the boat.
Gil and gut fish turn out way better than just bled.
Paint remover will loosen the latex carpet adhesive, then scrape and clean. I use lacquer thinner after the remover for clean-up but water works...
On a couple trips to Clipperton we were using Rainbow Runners as kite baits (no flyers) They got bit fine. We loaded up the tanks every day with...
That looks like a great trip.
Indo's pretty fished out, they used dynamite to fish inshore. It really fucks up the reefs.
It looks like you've got him covered though. I took a...
I've used the Izor 50# flouro, it's a little stiff like Blackwater
Chopa = Mother-in-law fish, when she asks you for some fish give her the chopa :)
What happens when there are 4 different color Intruders being trolled at the same time?
4 fish or one particular color gets bit and the rest don't?
Did you try calling Jerry Brown?
I'm not sure if this number still works but worth a try...541-855-7127
Wait, did you mean you need 2500 yards...
If you don't need it immediately, when the Fred Hall show rolls around most of the shops have deals like buy 2 or 3, get one free, even on line.
Watch the weather but I think it's going to be nice next week. Above Pt. Conception can get real nasty quick. If there's a lot of wind, pull into...
Personally I hate chucking, shark, shark, shark, and repeat...
On a trip a few years ago fish were boiling around but no one was getting bit on...
There's two boats fishing side by side right now at Clarion, one is the RP, the other just says Fishing. It might be the Indy or RR3.
SB to Morro Bay to Monterey unless you can make it across the bay to Santa Cruz
Tons of parking and you can leave your boat in the water at their private dock.
When you book a trip of 14 days or longer, your booking a trip to catch a fish of a lifetime, GIANT Yellow Fin Tuna.
I really like what Roy Rose...
You don't need a kit, those kits come with crimps you'll never use. I like the Jinkai pliers and crimps. Just get the crimps you will be using; J...
The three trips I did with Keith, we just gave the charter master our money and booked a flight.
I didn't go this year but Jeff took over our...
Yes, included unless something has changed this year. So does the Journeyman and the Osuna's boats.
So the Apollo doesn't provide the Mexican fishing licence?
Does the Success?
Congrats on your personal best and first cow!
Take your pick......
Check out Fish Dope :)
The guys on this trip are HIGH rollers, expect to tip the crew 50% of the cost of the trip :)
Fly into Loreto and get over to Mag Bay.
Sometimes the best fishing is in the MPA.
Up in Santa Cruz the life guards inflatables have these on the OB.
Did you make that drip tray over the engine yourself?
Is Drew back on the boat for good or was this a cameo appearance?
Regular 3/0 Mutus and Troker TK619
Sorry I sold the boat in 2003 but the hatch is right where you drew the circle, it's a hatch like on your passenger seat. There's a bulkhead in...
I put a small strainer like this in the wheel house drain. Saved a lot of stuff like screws, hooks and small sinkers from getting down there. Mine...
I've had experience with the small baits available now on a recent Guadalupe trip on the RP. The crew gave me a couple promo packs of Trokar J and...
I'm with you Tim, I found these 18W like yours that are as bright as my 500w 120v Halogens.
2 for $14. I've had them for over a year and sill...
Who needs a kite!
I can see it now...a long range boat sits on anchor with fish boiling on the chum baits just outside the fly lined baits. Not a...
It's Trump's fault!
I was told she's moving to Canada with Whoopi. :)
I've tried them all, Anthony's, Mike's, Mario's, Five Star and Fisherman's....
My buddy had a bunch of these. Wahoo lure from the 90's. I believe they were made by a guy in the Oxnard/Ventura area. They came out about the...
Did they have squid on board or did you stop to make it?
I was hoping they have it in the receivers for us private boaters.
No, they're tapered on both ends. I don't think they would have been around all these years and landed tons of fish if they damaged guides. Easy,...
Who needs jigs or bombs and expensive high speed reels, just stand at the rail dressed like this and wait for 'em to come flying over the...
I've fished with Captain Keith a few times, he prefers you use the heavy gear, 50 size reels. Even when fishing the reefs you'll be targeting...
202# Wahoo...I don't think a Trini 16 would have worked on this one :)
??? Florida doesn't have any tackle stores?
Tom, do you make a pressurized tank?
Skiff...is this a friend of yours? Whats the story?
He posted this on the Mexico board...
Orange County, CA
Royal Polaris - sold the...
I always take a soft cooler like this...http://www.polarbearcoolers.com/product/48-pack.html
You can put it in your checked luggage on the way...
You'll need to travel from Nosara to find the boats, hopefully you'll have a car.
To the south check out Kingfisher Sportfishing at Playa...
There's a reason they still have a stash, the hollow ones with a rattle are junk. This one, the "thru wire" design didn't quite go all the way...
Where are you staying?
I don't know about sharing a charter, maybe the resort or the place where your staying can hook you up with another couple....
We're in Costa Rica right now. It's the low season now but when you get here it will be prime time. We looked on line and found a...
I got the survey too but because my ocean boat is documented and only asked about vessels registered in CA, I have two. The main one is only for...
It seems that the hot charter boat changes from time to time but I think Start Me Up sport fishing is the top...
Oops, thanks Tom.
Pompano and Precision both make outrigger bases like this. Pompano are chrome plated brass and Precision are SS. I believe they are the same size...
I took a TN20 filled to the top with spectra to Guadalupe a couple weeks ago, it worked great...to make bait.
Virtually no surface action, all...
Andaz Papagayo Resort - a concept by Hyatt
We leave Sunday from LAX at 8 am direct flight to Liberia. Probably rent a car.
We've stayed at Playa...
For our anniversary my wife booked a trip to a resort on the Papagayo Peninsula, Costa Rica.
There's a marina near by that offers sport fishing...
Have you ever loaded up the stern corner and tried to wake surf behind the 26?
I accidentally left one of my trim tabs down when leaving the...
Old school Penn 16 and 20 w/Baker frame.
I was at Guadalupe 2 weeks ago, used the 8' Predator for 60# and 7'6"...
United Composite RCX76 RAPTOR 50-80 lb 7'6" MOD-FAST $493.00
It says 50-80 lb but I believe these are under rated and can fish heavier line.
Nice report Matt. It's cool you got to fish/dive the whole weekend with your pop. You never hear about stars like your dad doing outdoorsy stuff...
Nice details Andre!
How was the bait making? I was told we will be catching Tubes.
Just FYI, that reverse prop will work, you just shift and throttle in reverse. Shift forward to go in reverse.
RP loads by number, first to pay 50% of the fair loads first and so on down the line. Charter master is #1. The YF in the counts came from...
Those Boston kites fly better than any I've used. The sock sometimes drags in the water making it difficult to start flying especially in light...
"30 customers, 150fish/day is 450fish"
Man I'd sure like to have been on that trip!
I've never heard of a SD LR boat with 450 wahoo but if you...
How is it you think this rod can handle 50#s of drag but a 700xh can't?
To me it looks like this rod is not very efficient, it's bent all...
I'd pay extra for a non smoking charter.
I hate it when the cook steps outside the galley door and lights up.
Take it to the stern!
August 21, 2016
by Jesus Companioni
Another day of very impressive quality tuna. Again, 60 to 80 pound average with a little...
Awesome pictures of outstanding catches!
How was the Vodka? :)
I came across this video and thought you guys might like it.
It's long but you can see that when the fish go down they're still there under the...
Where do I send the check?
Not the origanal but the one with pictures.
Pretty sad some LR boats can't find their own fish....
I can't stop staring at that picture. Nice catch for sure.
Invisible man :)
Did you try a drift where you caught your bait?
My friend sent me this photo but didn't know the details.
Anyone know the story? This fish looks huge!
Where the hell was this guy going?
Boy, that was a nice stop on some boiling fish!
I fish several different trips with guys that donate their whole catch, not with 5 Star and never a problem. ???
Grant Sucking Parasites LOLLOLLOL
That twin shaft boat won't fit on any trailer. Needs to have a cut out for shatfs and rudders. Good luck.
Why not Twin Lakes?
There's a pier in SD bay that has a couple cleaning tables but I'm not sure how you would get it there if you have a lot of fish to clean. Throw...
This is how a harness should be worn!
When we got 'em a few weeks ago it was all on the surface iron when they came up boiling. Blue and white or green.
Those rats make good bait!
The seabass are decent size. A quad at 7 am and limited out.
Sent you a PM on the other site.
She takes better care of me than my wife, but that's not saying much.
That fish was lost!
But stranger things have happened, like catching a wahoo inside the harbor in LA?
I like it, a dead shark hanging off the transom in one corner and a porpoise in the other. :)
I'm sure the captain will remember you from now on!
I like how you remember the exact time of everything, I usually leave the watch at home.
Hey David, curious how you strung this real, spectra/top shot, and what rod you used.
Parasitic draw??? Tell us about that.
I leave my lake boat trailer plugged into the truck for 10 days while on the house boat and nothing happens....
I might be able to help you out Kohei.
I'll check my storage today to see if I still have it.
Pontinus = Delicious
On some trips we'll pull up over the reef and catch a few for everybody.
Better have a good release clip!
I see they used a rubber band.
I bet you think it was Ford, maybe GM, how about Chrysler?no, then how about Mercedes Benz??? No!! it was a Chinese farmer!!
Most of the newest...
No longer made but you can get parts for them.
I believe the service center is in the SF Bay area.
Do you have the engine running...
From another post by Rock Cod Rick (part owner of Fisherman's Tackle)
That overflow lot known as "westies" lot is no longer a pay lot. You can...
Sato crimps here. Most sano and easy.
How about a Trinidad 40A?
This video of a large BFT swimming through the PSL hoist area was taken last week.
He ran into the break wall and was kicking up sand as he swam...
Two weeks until we launch. Are you ready?
See you on board.
The only one I know of is the Baja Naval Boatyard but I hear it is the same price as the SD yards. I've heard there are others but IDK....
After seeing some of the outstanding cabinets Boat Outfitters have done for some of you, I decided to update the one on my boat. I went on their...
Thanks for the link Bill. It sure looks like Mark likes it.
I just bough hundred yard coils of 100 and 130 quatro and some 170 to use on an...
I ran into a friend at the show that has made the switch to HI-SEAS fluoro as the other brand we have been using was having trouble getting...
Check out Lumitec, some of the tower companies use these built into the hardtop.
I came across this electronic flare in a magazine. It sure looks like a great alternative to the pyrotechnic marine flares we've all used for...
I'll bet "D" was bummed when he found out you were fishing with 80#, I
mean Premiere 100#!
San Diego Marine Exchange is the local dealer, they might be able to recommend someone to help you out. It's a two man job to remove them and put...
I'm going through this myself right now.
Pretty easy to do it yourself. Get all the parts on line if needed.
Mine were real bad so I polished and...
Any good glass shop should be able to make you safety class cut to your template and provide you with the right gasket for installation. Use black...
That 351 is a fatty!
Made these with Wahoo to take to a Super Bowl party...Big Hit!
Everybody raved about them.
Airmar makes a transducer that is temperature only and can be hooked up to your sounder units. B17-HP...
I've seen a lot of those tld 50II's reel seat blow up with heave drag settings. It's a 50-80 reel only. I'd use the metal reel for trolling with...
Wow, I was on that RP trip when the original "That Guy" Mike Ashford . The only guy I know that's been black balled off of almost every boat in...
Pretty popular in the 80's. Glass and graphite construction, I have a few in the rafters, caught lots of YT and tuna on them, I also have a light...
What a shame! I saw this on another site and thought I'd share it here.
I thought he was the guy standing next to Brian in the red shirt but I've never meant Steve so your're probably right.
I had a hard time finding...
Give Precision Marine a call, I've got the replacement nets from them in the past.
I used to launch a 25" Parker at the PSL hoist. Came in late one day at minus tide with a big swell and the same thing happened to us. I didn't...
Please move this to the
Nonsense Anything Board
Major photo bomb! I think I see Steve in there.
Matt Salas 250
Kohei got a nice one and has two over 200! Sounds like they're having a great...
50 Topless is my favorite reel for giant YFT, load it with 130# JB hollow spectra and a 130 or 150# top shot.
50w or 80 is good for the kite...
If I had a trailer boat I'd have this guy do all my welding.
He did the bow rail on Barrett's Chris-Craft....
Backing down that fast on a hot fish is not a good move.
Hard to tell, not much info.
This happens all the time here in SB
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
I guess they got it off the beach!
That boat used to be up here in SB outside the harbor in FOOLS ANCHORAGE.
Looks like he found a new home.
To me it looks like his anchor line...
Did something change or is it just my computer?
You know those aren't GYRO's right?
We stopped at Pelicans to BBQ lunch before coming back across and got boarded by everyone. First the Nature Conservancy warned us about...
Thanks for the heads up.
Picked up a pair of the Fraser Stedi-Eye Bylite Gyros for my Christmas present!
Giant YFT Tee???
Is this something new? I've never seen one before.
There were a couple up here in SB, this one is gone.
The action started about 8 am today and was pretty steady until after lunch when it really picked up. We kept 6-12...
Not a fan of the Braid Marauder with the rattle, one small fish, one hook straightened the other fell off the back of the lure when the wire...
I did this to our tow boat a few years ago. Not that hard and it took about an hour. Lower the trailer tongue all the way to the ground and block...
Hottest day of the year here in SB, 104.
I've always used a small chrome diamond jig or chrome sinker with a barb-less hook, anything shinny. Catch them with a PL68 too.
Last year we...
I think we saw you out there last weekend but there were a few Luhrs out there.
We trolled way out to the west, SC Basin, condition were great...
I know where you put the "S" there's a ton of bait and Bonita but it seems the water is too warm right there for Swordfish.
Four named hurricanes in the North Pacific right now, the first time this has ever happened.
I wonder if this shit will still be happening in...
Curious why you crowned the deck?
It makes it hard to mount large things on the deck when they're crowned, even an ice chest.
The boat I frequent always has a boat line out when we're in wahoo country and it's rigged with a 26oz spinner and an 8/0-10/0 double tuna hook....
Put a couple of those things over the bait take!
Send him the missing parts and get your $19.
Yes, do you know him? What's his story?
He wasn't very confident. Definitely won't fish with him again.
See ya at the dock.
Bring the heavy gear!
Riley Marine Services
840 W Esther St
Long Beach, CA 90813
What a mess!
It would suck to plan a trip in a season like we're having only to be stranded at the docks.
Good for you Doug making the best of it...
Big Fish to end another great trip! 07/26/15
The flat calm weather from yesterday continued into the morning and we began to see sign...
Have him pay to have the whole engine painted...WHITE!
Hey Jerry, can you post a link to the process? I'd like to beef up the drags on my 400's, I nearly got spooled by a sealion and I couldn't bust...
Good info above. Also down the coast there's a few reefs that hold some bass.
If you want live bait you can call to see if he has any before you...
Seine tuna = cat food $2.99/lb at best
What a shame!
I sure hope so! :-)
I saw Keith from the Maximas at the FHS talking to Frank about fishing out of Fisherman's this summer. Jokingly I asked him...
Back in the day when hurricanes worked their way up the Baja, the LR boats would fish albacore off of San Miguel Island and the Morro Bay coast....
What chaps my ass is who's weighing the fish being dumped into those pens?
Are the pen fish weight just an estimate made by crew members?
Satellite images can help. The boat has internet access, you can check daily.
I looks like a...
Same problem here, I went this route...
Left handed drill bits work better than easy outs.
Here's a video, I can't understand a word he's saying but you'll get the idea.
I've been going to Clarion for a few decades and I've never seen a YT boated there. Did you mean the Coronado Island's?
Yep, a squared off bottom to help prevent rolling over.
Briggs, is this the one you sell? My buddy has a couple and they work great. Is that a battery pack?
They pop up here on the classified board once in a while. Post a WTB ad.
Very true, drink the boats water for 18 days and you'd look like the guy in your avatar.
Atuna, how did you get the grommet on the eye of the hook? Cut and re-braze?
Grant's good but Drew is "da man"!
It's kind of funny how the cooks go from boat to boat.
I guess it's a good thing to keep changing things up.
A shallow water rock fish?
I once saw a thresher shark beach itself chasing bait, crazy!
Hey Fishy, check out the Alberto, look familiar? Looks like Alberto copied Albright too. :)
And Roy Rose is part owner/operator of the RP, someone has bad info.
I got one of these lithium jump start batteries I keep in my truck and it work great but it's a good idea to have two batteries with a switch.
I take the 25m coil of shock lead and cut it into four equal lengths which is just under 20'. Insert it into hollow spectra about two+ feet and...
It's not really about the roller guides as much as the Bimini twist. The only reason you would need to do one is if your using solid spectra but...
Post up some before and after pics.
Clunk-clunk, clunk-clunk, clunk-clunk, clunk-clunk, clunk-clunk, clunk-clunk.
Clunk-clunk, clunk-clunk, clunk-clunk, clunk-clunk, clunk-clunk,...
I read that a new bill is being introduced to make a fishing licence valid for 12 months from date of purchase just like Mexico. Also the age to...
He removed it because he didn't have the title in hand. He's going to pay off his loan and re-post it later. We'll see what his new price will be.
Take a machete and you'll be fine
Two 18 watt lights for $28
You should be fine but make sure you fill the hole with grease to keep water out.
Trolling for Blue fin?
This trip is kickin' ass! Especially this newby Ali, he caught another one over two yesterday (223) with 3 more days of fishing.
If the trips are a go, will they have to go through Ensenada?
I took a Mak 20 with me on my last Maximus trip, fished it for about a hour the first day. Keith came up behind me and asked me not to fish it,...
I always thought that being to be able to pull up to the dock and unload fish for processing was a brilliant idea. For guys like...
I've used planners for salmon and trolling baits for Thresher shark. We also use them for making bait in PV.
The Long Range boats, that most of us...
You sound like a perfect recruit for ISIS
Not a Radon
I guess some of you have never ridden uphill when the wind is blowin' 25, gusts over 30 with 15' + seas. You can't sleep because you keep flying...
Oil bath hubs.
I have them on a trailer we take on really long trips to Utah every year and in 10 years have never had an issue.
I've been seeing a trend for these east coast center consoles getting bigger every year.
57' Blackwell (not really a center console)
Did you try to call Rick? That would be my first call, he may be able to give to the measurements of his.
If you ride the Star be sure to wear your 5 Star Processing and Intrepid shirts. :)
I've fish a couple long trips with Jeff too. On travel days he would get up in the am have breakfast then run laps around the boat for about an...
Maybe different color options for the International line? Black or silver?
$42.5K for a bare hull without widows or deck hatches? o_O
Who are you quoting here, IRS? Tim Ekstrom? Carrie Wilson?
My accountant (CPA) does LR trips on the Rooster, he does it and told me no problem.
I've fished with a retired tax attorney that does 3+ long...
Did anyone notice that the AA got 2 fish over 300#'s in the same day?
Looks like the fishing is getting better down there from all the reports....
I was at the harbor this morning and saw this in the parking lot.
I'm not sure what it's built for but I'm sure they stay dry inside.
Have you looked at this one?
This might work for you...
I agree with others, you can take a lot of wood off with 40 grit and a random orbital. No need to disassemble the whole thing to refinish and...
I got a Tiburon from Squidco $45
May as well go all out and get a Stidd
"If Mr. Penn wanted a thumb on the spool he would have built one on it."
243 videos + 337 sound effects + 126 work hours
Very bright, changing colors and fading. You can get them for under $300, just add more lights if your boats big....
"The sardine takes off like I knew that it would.
It gets picked up by a nice fatty.
I slide the drag lever forward and head to the bow."
Hey Manny, Did this fish eat both hooks on the double trouble? I don't think I've ever seen that before.
You could use it to make bait
Nice report Mike. I hope it wasn't one of the leaders I made that let loose.
I'm going to eat some of that tuna right now!
Jason...The Yacht Doctor is the man. He works on everything but gets very busy. I've been using him for years.
Added another video.
I use 7691 10/0-11/0 to replace broken or lost hooks, Jobu's are good too.
Probably gonna need new ball bearing swivels and rings too.
Wow, remind me to never piss you off!
Talk about internet tuff guys, your the real deal.
So Rodman28 and Dressed-in-Drag are the same guy?
All of the above!
Looks great Squid! Nice to see that yellow gone :)
Do you still have the SS tower? I used to have a isinglass enclosure for it that was great on...
Another one, 6 or 7 guys take off on the same wave down the line and no one makes it...
Sent you a PM.
We fished the 43 spot on my buddy's dad's boat yesterday, a 33' Bertram. He has a dock in front of his house in Huntington Harbor, pretty nice to...
What's the limit on yellowtail?
Magic Eraser before chemicals
What's the story?
I see your up to something Barrett, twin outboard center console or a twin diesel express?
Were there any cows or fish over three caught on this connection?
It's so simple even a caveman could do it.
Swamp people...Squigly, is that you?
I really like this shot!
I have 65# spectra on two 533's topped with 100 yds of 50# mono. Use them for jig fishing but have been taken into the spectra many times without...
Art Taylor on the Searcher said he is on a whale trip heading south and found BFT jumpers mixed in with schools of yellowtail just south of...
The boat was originally built as a center console for Jerry Shalhoob, Nick's dad. Jerry went out with Kym Herrin for a while, the centerfold . She...
2" anchovies...oh boy!
Hey Squidd, I see your a welder. Did you make the tank yourself? You gonna paint it the same color?
You should start a new thread. I'd like to see...
It's impossible not to when there's only 1 small road in and out and it runs right along the beach.
Hollister Ranch - Little Drakes, Big Drakes...
What happened to the photos Wahoodad posted?
Is there a reason its now gone ?
yeah, what happened?
Have you looked at the Iridium GO?
...go to work. St Patrick's Day swell
On my way to the job site I had to watch this...
I got to the site, set the crew up and by the time I got...
A surfer was bitten by one at Jalama yesterday. I've heard of urchin divers getting bit but never a surfer.
Is this what your looking for?
You might try to give this guy a call. I bought a rod and reel from him a couple year ago and he said no one...
Here ya go...
I'll stick with hollow and the Sato crimps.
To many Yankee's fans on that trip...
A good dive mask and a utility knife to cut line (lobster/crab pots) from a fouled prop. A spare prop is a good idea too but you have to know how...
If I'm not mistaken this is the same group that had 11 fish over 300#'s one year. I was on the trip after and Dharyl , the deck hand, told me...
From the Royal Star reports...
"Once again most of the bites this morning came on the skipjack with the most effective hook for this application...
Isn't this the same guy fishing on the Chiron out of PV a couple weeks ago...[IMG]
I was looking through my old reels and came across a Squider Jr. I remember catching a lot of albacore, halibut and salmon on this reel. Super...
Any chance of getting the "Last Message" after each forum put back on the main forums page?
I was wondering the same thing and if it charters trips. I found this......
It sounds like you were fishing with "that guy" (or you are That Guy), but maybe just a practical joker?
Cutting your line is F'ed up.
Nowhere to buy lead that I know of. Best to bring your own and leave what you have left on the boat. He's getting quite the collection but it's...
Good advice right there!
Keith likes to turn the deck lights off at night for a couple of reasons.
My last trip I put out 100# on a Makaira 20...
Congrats Erika, a new personal best.
One day a man decided to retire...
He booked himself on a Caribbean cruise and proceeded to have the time of his life, that is, until the ship...
I don't think it would be a good idea to serve your line to a hook but maybe with some Teflon tubing it might work. :)
Serving = spectra to mono...
I sounds like your a personal friend of Jeff's :)
Congratulations on your personal best!
I guess having a good source for bait won't be an issue with an Osuna connection on board.
Didn't you post a report yesterday?
The whole thread seems to have disappeared.
Nice report and congrats on your personal best.
i was wondering if they would have any problems getting bait but I guess with David Osuna on board...
Here ya go...
ps...Anderson told me it's an '87 not '78
Have you guys seen this one?
Just a guess...
Parachute Sea Anchor for Boats to 35', 12,000lb. Max. Displacement, for Use with 1/2" Line and 5/16" Chain, 12' dia., 8"...
Mighty Mouse kicked ass!
Fabers'-McDonald fight was a good one.
Curious what 130# leader you were using?
Good to hear!
You know I'm a big fan but would prefer a pilot house.:)
How long is the center console?
Good deal, I've never had an issue with one crimp but have been using two for the last couple of years too. Couldn't hurt to use glue.
One crimp or two?
My buddy runs a fishing charter business out of the Guanamar hotel at Puerto Carrillo. There's some good surf spots in that area but we were body...
Once again Barrett, a work of art!
I hope soon that your dad and you get back into the boat building business so you can make us a boat built on...
Harold used to make boats...Davis Boats. He's donated a few to "Friends of Rollo" over the years that were given away at the Fred Hall...
Are you sure they went to Clarion???
Their report says the "lower zone" which indicates to me they went to the lower banks.
I could be wrong and...
I think it's a great idea.
I've always thought when the guys are processing my fish that maybe they could slice up some filets and make a couple...
Trade for a factory 2X4...
This will be a nice boat to fish out of PV. A little more competition for the locals.
Sent you a PM
With the federal government shut down they decided that NOAA and the National Marine Sanctuary are non essential programs.
It might be a good time...
10th or 11th
I check those links, thanks. They're all booked for the dates we'll be there.
Any other suggestions?
I like this one of him slamming right into the stern. :finger:
Renting a caravan for two weeks.
I was hoping of catch one of these giant Kingfish, the north coast? Bay of Islands maybe?
My wife and I will be in NZ in two weeks.
Can you recommend a charter boat for us?
Sea sickness medicine is not provided, please prepare in advance
I guess your right, last time I checked it wasn't there.
100# breaks @ 124 .48
130# breaks @ 187 .58
Mark, any chance you can send some TT 80, 100 and 130 to Paulus for testing?
I have some 100 I could send but since you have it all it might be...
I copied this from an older post, hope it works.
Enter the phone number @web address below and you end up sending a text from your...
There are advantages to the upper staterooms and clearly disadvantages, especially if you like to sleep at night.
Been there done that!
Same thing for me...I got a reel and had them put 100# on it. It only held like 380 yds so I sent it back and they repacked it with more line but...
Eyes in the Sky
Hey, that's my old boat!
Your right, it looked a lot better when I owned it. It had a new galvi trailer under it too. There was an isinglass...
I used to have the same boat with the same hold, not insulated. I wonder if it's the same boat?
Anyway, we would make an ice slurry in...
Here's the story that came with it. The light on the back side of the twister looks legit.
I just saw this shot and thought it looked pretty cool!
Was your tank leaking?
This seems like a lot of work if not.
This is what that boat could look like.
Fishing-Backman Albacore Spcl 23' -Diesel
Check the active ingredient in the ZEP or CLR...bet it's oxalic acid!
Vinegar is what to use if you want to etch galvanized metals to accept...
Which do you like best? #1 or #2
#1-Roxy Pro Biarritz 2013 Official Teaser - #Who Am I Just GuessRoxy Pro Biarritz 2013 Official Teaser -...
I recently spent $6,500 on a young registered Black Angus bull. I put him out with the herd but he just ate grass and wouldn't even look at a cow....
Oxalic acid or Barkeepers Friend to clean the rust residue on the chain and anchor locker.
Dorado and Wahoo [IMG]
Jabsco Cyclone centrifugal pump
I have a 775xxh, good 100# stick maybe 130, fished it with a Mak 20. The biggest fish I've caught on it was about 160 and it has a nice bend to...
300 pound tarpon caught with Capt. Justin Moore - YouTube
Here you go James. That thing is a work of art!
BLACK MAX - 15' Boston Whaler Restoration By Image Marine - Seminole, FL - YouTube
Go stainless, aluminum pits over time.
In your area = Riley Marine Products - Home
It's hard to tell from you pics but most windows are installed with a rubber weatherstrip/gasket.
A good glass shop in your area could fix you up....
Yikes, it looks like that Accurate went for a swim.
Can you say deferred maintenance?
I done a couple cutting boards with deep knife cuts. It sands pretty easy.
Start with course paper like 80 or 100 to get the deep cuts out and...
It's illegal to filet fish in Mexican waters.
If you catch 'em in US waters it's a whole different story.
Be careful having CB spool your reels, they don't tie it to the spool.
I've witnessed it first hand and captains see it all the time.
South // Surfing Videos on MPORA
From my experience, alcohol stoves aren't very hot, takes forever to heat anything.
If you have a generator go electric, if not propane is good.
I saw this post on the Duramax forum and thought it looked pretty cool.
Mastercraft + Duramax (Project started) - Chevy and...
I went down to the harbor to run the engines and check things out.
Port engine starts no problem, turn on starboard engine, hit the start button...
Not to mention your f'ed up leader.
The Washington guys should be all over this one.
Boats: 1986 Correct Craft Fish Natique with Trailer - Spokane, Washington
Remember, if you use a 13.5' swinging gate you will need to park your trailer almost 13.5' back from the wall to close it.
I'd go with a rolling...
Follow your bait/fish!
No angles, no tangles.
2003 VW GTI 20th Anniversary
Did you see this picture on the mainland Mexico reports?
I think this is at Clarion. This could shut down a bite!
Riley Marine Products - Home
This ones pretty good.
Select an area, click on "Wind" and scroll down a bit and click on "Charts".
SwellWatch 3D - Surf Report and Forecast
Do the tires hold air?
I believe this is the same scale used on the RP and other long range boats.
I'm sure it will sell fast but you might try one of the LR boats that...
Indio x 2
This one??? What do you mean LIKE?
I think this was this week???
"the obvious solution: I need to go fishing more often!"
True that, we all do!
Nothing better than time at the rail.
This might help...
Model Selection Guide
Here's a picture of three sets of them. There's large set screws on one side of them to keep them in place.
No big deal.
On our last trip the crew asked us to make one kite leaded with wire!
Back to the 90's.
WaveWalker Charters - Santa Barbara, California
Here's a link to Oracle Team USA for your reference:
ORACLE TEAM USA - Fun on Foils - YouTube
I've fished a couple of trip with a guy that builds aquariums, Monetary Bay Aquarium. He knows a little bit about adhesives, he recommended and...
Good Luck Brandon! I hope you knock 'em dead!
I had a little problem the whole trip, bummer.
My friend's baby's mama loves to fish and hunt!
I hope she doesn't mind I got these photos off her Facebook page
I'm leaving tomorrow on the RP, flying down.
I hope conditions change but if not I'll be using some of Fishy's favorite easy release disposable...
This guy caught a large tuna with a 30w no problem!
Nice job Manny!
The boats looking good!
I bet the girls in PV just love your bat! :)
The Excel likes those Eagle Claws. I've been using the Mustad R39943NP-BN Demon Perfect Circle Hooks 4X in 6/0 and 7/0 the last couple of trips...
Good one Bruce!
It brings back good memories for me, I've hiked that beach a few time.
Thanks but I'm really looking for one with ringed guides.
I'm looking for a Super Seeker 6463xxxh.
Prefer a custom rod wrapped full length and ringed guides.
What do you got?
An Idaho gentleman walks into the bedroom with a sheep on a leash and says...
"Honey, this is the cow I make love to when you have a...
I cleaned out my tackle box today getting ready for my April trip.
These are the ones I'll be tying on first, they've all been bit pretty good....
Did you see this ad?
He's looking for your boat!
What pound test would you fish on this rod Bill?
Next week, 3 day snowmobile trip through Yellowstone & 2 days snowboarding in Jackson Hole.
March, snowboarding in Mammoth.
April, 18 day on the...
Did you ever sell this hull?
I came across a picture of a sea chest on a Parker 3420, looks pretty cool.
Great report as always Erika.
Jesus is a great guy to fish with. He's been on all of the premier LR boats at one time or another. I was wondering...
I hope it get's better when the tide drops, it's looking pretty weak right now!
Here ya go...
I like the in the water perspective, jet ski no doubt.
I thought those were outlawed there or is that just tow-ins?
Anderson Custom Boats
20 South Kellogg Avenue
Goleta, CA 93117‎
no website that i can find
Chris Peterson made some and gave a few out on our April trip.
They got bit but didn't hold up very well. They started to delaminate after a few...
Hey Spike, are you talking about me? :)
I see deck hands take the rod away from passengers all the time on the LR boats. Some guys are newbies...
Talking about a lot, is this for real???
Over a BILLIONposts???
Does Tues really own this site?
Not my job...
:) Exactly, this is my LR big bait rod that I fish 150 lb with a 50 size reel.
Right now it has a big foot roller stripper followed by a regular...
I read the survey, man that thing needs a lot of work!
Good bones though.
I wonder how much it will go for?
I have a 6463xxxxh with roller guides.
I'd like to remove them and re-wrap with ring guides.
Can someone tell me the size and amounts I need of...
Breaking Bad is addictive.
Also, Son's of Anarchy...should be good for a couple of bad weather days
I like the idea too but, I got a PM from a friend that is probably true...
"I have mixed feelings about it.. On the one hand, it will be nice...
Great whites attack seal off Santa Cruz Island
By PETER HOWORTH NEWS-PRESS CORRESPONDENT
Last Sunday at noon, Andy Perry, deckhand on the...
"Royal Polaris to offer WIFI to our passengers beginning June 15, 2013!!
details coming soon."
Dear Dr. Phil,
When I retired, I could hardly wait to spend time enjoying my favorite pastime fishing.
I bought my own little fishing boat...
Good one Mike...I haven't seen you in years, but maybe you've grown younger, taller and hairier :)
Thanks David, I guess I had it confused with the RR3. My buddy is on that one.
So Aaron, did they weigh that hog yet?
What's the story about the boat going to Guadalupe?
I must have missed the announcement.
I recently returned from PV and found my Bazooka tube broken.
I've tried PVC, ABS and I found these that look interesting but I'm going with the...
32-34"h x 25"w x 43.5"L
To the top of the lip is 34"
Off Shore 110 gallon bait tank.
Used but in good condition.
I have a soft spot for these boats as I used to have an 18' Radon built by Ronnie in '79. Glass over plywood. I bought the boat when...
Call Stas at Astro Machine in Torrance. He could hook you up.
Sorry I don't have the number.
I have three of them in a wake boat, reversible Jabsco water puppy for ballast tanks.
I would fry the regular ones all the time. I've had the...
Just double the line...
I use a single San Diego when bait fishing, not as small as some but plenty strong.
McMahon for sure!
This one won 2.4 Mil. last week.
It's sold...Ali bought it.
Separate names with a comma.