Like the other fellow said, What a beauty. Does it have an interior helm, or is it only on the flybridge? Would like to see engine and interior...
I'm a long time member of BD.
I would immediately call the Coast Guard. I would await instructions. I have been an active boater, with a great...
What an amazing line of threads. Maybe it wasn't a complete waste of an hour of my time. I learned a few things. Some safety considerations have...
Complete boat still for sale. If the Trailer sells, then I am going to start parting out the Pilothouse, anchor winch, engines outdrives, etc....
The boat and trailer is still for sale. I will let the whole boat, trailer engines, etc outdrives, Pro Fish anchor winch, go for $6500. She is...
Boat still for sale
I've been on this boat out 50 miles for Albacore last year. This is a fantastic boat, and gets stupid good mpg. Mikey is obsessive about...
PM me, I can put her back on the Trailer in a matter of hours, but would not do with out sale first, 6k, for boat and trailer would work. I can...
Oh yeah. Heartbreaking, actually. Selling my Arima 17 also, but getting a '91 Wilson 26, to move the goods over to. The 28 would have been...
I don't know what fuel burn is. I just put a new , dual Floscan on it, but didn't run the boat afterwards. I assume it is 1 mpg. The interior is...
Parting out my partially restored Skipjack 28 Vintage 1975. Going to buy a smaller boat more suited to my needs. If someone wants the boat,...
I have an Aluminum Magic Tilt (West Coast) Triple Axel trailer, is under my 28 ft Skipjack. 10,000 lb. bought the trailer NEW in October 2012 for...
What's going on with your boat, and motor?
She for sale. I just put in the new Dual engine floscan. Cost lotsa coin and my labor to install. I might launch at Eureka this Sunday and throw...
Thank you for the kind words.
The Skipjack Fisherman is one of my all time favorite boats. I had one back in 2005. I didn't like mine, because it...
Well, Vallejo is only 250 miles from Humboldt. I would be taking a lot of the Gear off the Skipjack, to move to the new boat.
All the Electronics...
Is that from the same Precision Marine out of Goleta? It's a beauty.
What are you trying to figure out?
why is that
[ATTACH] Ok, here is a pic of my Skipjack. It has Vintage SBC 400's. But the Hull has blisters that were never repaired. Buyer would have to deal...
Wilson_26 by bwano posted Mar 1, 2018 at 10:46 PM
I'm buying a 26 ft Precision Marine (Radon/like) boat from a friend. I think it was built in 1991. This builder was in Goleta, and went out of...
Thanks, Nordhavn, for the well documented post. I have the same problem with my Starboard side outdrive. I often leave the outdrive in a 70...
Boat load of fishermen, and nice catch. Way to go Capn Dave.
Would you take $500 for it?
John in Arcata.
What a beautiful boat, and a great price.
Yes, beautiful boat, indeed.
Skippy almost ready for splash, but I'll do it up in Eureka, humboldt bay. Fuel tank hasn't been scrubbed yet, and new propellers, have been...
It's a Girl,
Like being Re Born. 12ft 8" to top of ladder hoops. Going to need to find 13 foot gas stations. Eeeek!
Pulled out of deep storage...
[ATTACH][ATTACH][ATTACH]Job from hell, installing 80's vintage 280 outdrive. Solo. Using a wheeled, hydraulic, Motorcycle work jack to support...
It really used to be, the Harvest Church. I didn't know who was in there, before, when I first saw it. I have to show more respect now, to the...
[TD]African Mahogany Liferaft Cradle standoffs.
Deck is convex. Cradle is flat. Problem solved. Next to coat 3x w UV varnish, then...
Thanks for the compliment.
I'm going through serious depressing changes, getting used to suddenly being forced to retire. And lots of Anxiety,...
About 8 months ago, I pulled out this nasty old water heater, that kept tearing my clothing, and cutting my skin. It actually still worked, and...
$5,000I would take $5k for it. The Blackman.
The only thing, I have done to it since bringing it home from BF egypt, is rebuild the Cuddy Door,...
I would take $5k for it. The Blackman.
The only thing, I have done to it since bringing it home from BF egypt, is rebuild the Cuddy Door, and...
[ATTACH][ATTACH][ATTACH]Months, trying to get a decent finish, rolling and tipping, Interlux 2 part Polyurethane.
Broke my foot in August, a...
Kind of a shame it was all for a 13 footer, but it is epic.
The teak pod was my favorite part.
20 to 30 hours, and $80 in Stainless hardware, Epoxy, Varnish, sandpaper, etc.
Emergency run, to Home Depot, to buy additional Jorgensen pipe...
dry rot repaired, totally epoxy encapsulated, then several coats of Interlux Perfection Plus clear UV Varnish. And of course, Stainless bolts to...
what power does it have?
What are you doing on the Blackman?
[ATTACH][ATTACH]Lots of hours sanding and filling w epoxy.[ATTACH][ATTACH][ATTACH][ATTACH]
[ATTACH]So you're saying the P house is Aluminum?
Was it on another Skippy 28?
Yours, It's Bad ASS.
As you know, I'm finally done w my P house....
I've put the Blackman in storage, while I'm trying to finish the Skipjack.
But temptation got the better of me, so I pulled the sad, weathered...
Where did the P house come from, how much was it, or did you make it. I like it.
Do you have other pics?
I am in market for another 350 CHevy,...
I can''t believe that beautiful boat has not sold yet.
Volvo 280 Lift Device. I believe it also fits 270, 290. Works great, good condition.
I have too many of these, and need the $ for my...
WTB JRC Radar cable. I have a 1500 Unit.
DC Electrical panel, Skipjack panel would be good, but would consider others.
Well, my foot is still in an Air Cast from dropping the 50lb vise on it, and breaking a toe bone, along with generally crushing the entire...
12-3/4" 153 teeth, no nicks in ring gear. Should fit 350 Chev w 2pc rear seal. Bore is 2.5" Hole circle, 3.5"
Part Number, 366861N
was it hooked up to a Volvo 280? Year?
Is it a running engine?
Thanks Guys! I pm'd and called Mark. Mia will have to inspect any equipment.
Looks like I missed deal w Mark, by one day. Oh well, I'll keep...
I'm glad your buddy is ok.
I believe most boating deaths, are attributed to folks pissing at the stern, and falling overboard. I almost always...
Poor Old Dirty Girl. Running around getting the Blackman 23, and breaking my foot, I haven't been able to work on her lately.
I did drive my (New...
Need complete engine, w FWC, dead or alive.
For my Blackman 23 Project boat.
John San Diego
510-220-1356 text ok[ATTACH][ATTACH][ATTACH]
[ATTACH][ATTACH][ATTACH]Blackman home in San Diego.
I need to find a used Volvo 5.7L dead or alive. I have a new long block, but NO, accessories....
How much longer, do I have to make a Mexico Hungary DSM trade? When is the cut off date?
Cup holder, and sun roof, very professional. Glad you and your family enjoying boat.
No,only for road travel, then back upright. Top of P House close to 12 ft already. Will confirm, when I get it out of sloped back yard, and onto...
Will my Raymarine HD Color Radome, be harmed by tilting it forward, and, essentially, upside down, for highway travel clearance?
I might get a faster response here, than the BOCA board.
Can any one give me the weight of the Albacore Special?
I need to get a trailer for the...
Can you send pics. What shape trailer in.
[ATTACH][ATTACH][ATTACH][ATTACH]Except for quick topcoat on roof, that has already been non skid primed.Moved sun shield off roof, and onto...
You're welcome, on the water heater. Thanks for the Red Trolley ale. SB_Surfer, gave me a nice Bomar hatch.
I took a day off from painting and...
Heading out tomorrow in the Inflatable, if you're interested.
Looking good on the roof rails. I told you so.
Better than that stinky starboard.
What is a plc part?
This may be buried here somewhere. And ten years ago, I tried to find the stuff for my Skipjack 25 fisherman sliding windows.
Where can I get the...
John, why is your wife wearing gloves to replace the Volvo fuel pumps?
Hope you have better luck with the Volvo parts, so I can say...
[ATTACH][ATTACH][ATTACH]Not near enough. Maybe by Christmas. :imdumb:
Finally Topcoated forward section, good enough. Moving to next panel.
Yup. Looking good, like everything else you do.
I keep trying to apply too heavy. Paint, sand off drips, paint, ..................:dogpiss:
Rescued this ladder, from dumpster death, modified,...
[ATTACH][ATTACH][ATTACH]I like taking my dog out. It's F ing people that are a pain in the ass.
Applied last night. Interlux Perfection, Pearl. Love this paint. Two more coats, then can remove ugly scaffold.
Nice work on the shift interlock linkages.
I switched to Interlux Perfection Plus Varnish for wood. It is absolutely gorgeous stuff, just like...
Yes, that one's beautiful, and I noticed the price dropped from 18k to 16k
Jose, is taking good care of Dirty Habit for me, till I pick it up, end of August. Moved her to a more respectable spot....
Will be glad when I finish the upper Pilothouse, and can sell the Werner Scafflold.
First coat Primer here, tomorrow morning, another coat, then...
Very Professional glass work. Thanks for sharing
Beautiful boat. More pics, and story pls.
Looking for used Galvanized or Aluminum dual axle trailer for 23 or 24 ft boat.
John San Diego 510-220-1356 text ok
Interested in the Fresh water cooling system.
Also need a flex plate..
Loved the Kapuku name. Beautiful job on the Stringari
Thanks guys, for the support. Would love to see any old pics of this boat, from it's previous owners. Or history. Thanks for the name suggestions....
In your dreams.
Tom, you dog! I was really considering an Arima. They are the best boat for the linear foot.
Anyway, I'm committed to a new project, and working...
Great to see her running. You and your family have done amazing things with that boat so far. Like the Graphics and the name. And the Factory top,...
My plans are to sell off the Promarine inflatable. Stick in the new 350 chevy motor, (that came in the deal), rip out the saddle tanks, put in a...
Silly me. too much to drink. It's a Blackman, 23 Albacore Special, 1979. Almost same vintage as Skippy. And that's Mia, the wonder dog.
She is a...
Where are my manners?
First coat Primer on, here. [ATTACH][ATTACH][ATTACH]
Well, Mr O'Bryan, thanks. But I just spent another 2 hours sanding the primer on the P house I been working on for a full year. Half of that, two...
[ATTACH]Made a deal on this one today. Will be bringing her to the Orphanage at the end of August. I'm hoping to have the Skippy floatable by...
I'm interested in Windlass
im in Lemon Grove
Officially Adopted. Open to name suggestions for Dirty Girl's little sister
Thanks Jose. Nice to meet gentleman seller. Will give her good home.
Your wife does damn fine work on the woodwork and wallpaper. Damn. i got no helpers at all, except Don Julio. But I'm still plugging away.
Prime time.by end of week, should be painted and finished off.
At least 19 hours fairing sanding much of it lying on...
Yep. I have to lie down on the scaffold to get those lower radii w a drill mounted mandrel sander. Lotsa nice fiberglass dust in the face, and...
I could restore those wood pieces. How much did Skipjack want for new ones?
What did you do with the old Pilothouse, and do you still have the molds for the new one?
I believe, I'm going to adopt this one. Let the Bwano have it guys.
[ATTACH][ATTACH][ATTACH]Starting painful process of fairing the forward P house, with all it's demanding curves and deep concave areas.
Ok. finished the Port side.
If you don't count the stripe at water line, soon to be, Burgundy.
Next stop, fair, prime, and paint forward P house.
You always do such awesome work. Always inspiring, and informative.
Well, got the topside, from rubrail to waterline, primed and first coat of Interlux Pearl, Perfection Polyurethane on. Ran out of paint before...
The most amazing boat build I've seen. Envious of your skills, and professional results. Inspirational
I burned out a new Porter Cable 6" in less than 3 months. working on my 28 ft Skippy. I could see the clouds of epoxy, and or fiberglass...
I'm buying a $550 Festool Rotex sander next week for boat sanding.
I want the sander for hull, and pilothouse sanding.
And later, to remove the...
Dennis, at Affordable Marine in SD had a wooden pulpit, that might work.
Skipjack sells their parts at a very fair price, considering how much...
Ordered a beautiful, used, Life Raft Cradle on Ebay. It was a couple inches short in every dimension for my Canister.
Cut, cut, cut. Silver...
I got tired of ripping pants and shirts on the rusty POS heater in the hold. :dogpiss:
Picked up this Isotherm Stainless model, w Dual Heat...
Pretty damn amazing.
Gorgeous tube work.
more progress on the Thousand hour P house. Fair and paint, Forward section, and hull down to water line next.
I don't know what that is. Mia is a Kerry Blue Terrier.
THe Skipjack is actually for her. I just get to use it when I take her out.
Been obsessively hammering the weeds for WSB in between, sanding, painting and my (4)10 hour days at work. This is my second one in a week, after...
Fits a 4 or 6 Man rectangular Canister. $25
I bought this one at Minney's
I bought a more expensive stainless one today on Ebay, for a lot...
Between working 10 hour days, and trying to work on Skippy after work, or days off, I have been working like a Terrier obsessed with a rat, trying...
Thanks, all, for info.
Some of the shops mentioned, I have called or visited, with unsatisfactory communications.
I called Cogswell, and will...
I have two, 280 outdrives, needing primo gears, swapped from corroded housings to good used housings.
I have the replacement housings
Thanks, Bodega Dave, for the informative post!
Do you still have Outdrive lower unit?
What is condition, and gear ratio?
Need Cable for JRC 1000 Radar scanner.
John San Diego 510-220-1356
Want Used DSM 30 or DSM 300 Raymarine sounder module.
John 510-220-1356 in San Diego
Made from scratch,ripped lumber on saw. Rabbeted shelves, all epoxy joints. Military strong RAM articulated arms can locate massive screen next to...
Finish is just Danish oil. I'm waiting for the Purple Heart to suntan a little to match the Mahog.
I spent an hour today sanding blistered West...
Marine Part Depot has insane prices online for things, other manufacturers, charge 400% markup on. Bollard was 316 Stainless, waaaay cheap....
Raymarine closing out non Touch screen Multi function displays.
Sanded fuckups and drips off port side from P house...
1 of 3 sides done
John, I am going to use the original, Rule, cheapie Bilge pump switch, for my bait tank pump later.
I substituted the "Smart Bilge Pump...
Original plan was using Lexan 1/4" for windshields. The way my design morphed, due to the many, complex convex curves, in the windshield...
Ok. A little bit of perfume powder and paint, on my Ugly Girl. Just first coat primer Interlux 2000 on Port wall. Fair and prime Starboard, next,...
Good luck w the new pumps. Those defective ones should have been pulled from shelves as soon as Sierra was aware of the defect.
Thanks for the heads up. I may steer away from Sierra stuff.
Beautiful truck. looks New
Yup. Score. for shore. Cool dog, too.
Pilot house updates.
Nearing completion of epic project.
Needs perfume powder and paint.
ahh, the battle.
Still glassing the last roof section of 18" down on the saw horses. should have it in place before Friday's rain.
I prolly need to do that too.
Bad to the bone.
Art Deco bow roller donated to little sister, from 28 ft Skipjack.
Purple heart wood also donated from Skippy.
Pulling anchor and chain over...
Let me guess. Toothpaste scrub?
Your wife sure treats you good. You might also try the 3M stuff for restoring vinyl windows. it worked miracles...
Thanks for sharing the project w pics.
Next phase is epoxy fairing, then Interlux epoxy primer.
More P house progress. Damn cold for San Diego.
Last section of roof, getting one layer of 1708/epoxy and then finish on saw horses, on ground. 4...
Mia from Sushi Suzi, and Dirty Girl.
She spends hours watching fishing rods, divers, bait, seals, whatever is out there. Gives bouy bark...
Spent a couple hours this morning, working on rear frame.
Fir 2x6 is temporary. Frame successfully squares Pilothouse. Last linear foot of roof...
Had a wee little problem, with the aft half of the Infamous Pilothouse, depressingly out of square. I needed some hard wood, that could help exert...
Boat gorgeous w the Christmas lights.
I would go w Stainless disc brakes. I always have, and never regretted it.
what he said
keep chipping away, and thanks for sharing..
it all helps others by example and inspiration
Want to buy controls, harness, etc. for 50hp Honda 2006
Just another Phouse update. Nearly done.
Used anchor winch, rope and pulleys to haul aft section of roof, up 13 ft in air.
That wall paper really lightens up the space, and is quite tastefull too.
beautiful wall paper, and softscrub job, as well as the cover w the marinco plug. I'm envious
Awesome job on the Pilothouse.
The crown was a really funny story. A scientist at work made the computation for me, that for a 1/2" rise in 69" span, it would take about a 28 ft...
more P house
Roof coming along nice. Convex crown looking excellent.
Ran out of Epoxy Resin, and $$. need to wait till next paycheck to continue....
Front half roof, basically done, except for tabbing corners, and fairing/priming exterior. Starting on rear half of roof, on sunday, needs layer...
What a difference a day makes. Starting roof. Great windy day to blow away fiberglass gobs of dust.
Cut a nice forward overhand, like the Farallon...
Just need 8 more hours of glass and grind on the starboard side. One more layer in and out, on upper portions easy work. Then I can cap w 2 sheets...
Latest Progress on P house. Glassed in upper wood transition piece, now lower section filleted in. Almost done w glassing the P house sans roof....
Nice boat. I like the 25's.
Why in world did Cole use that dreadful Brown? It's on my boat, and I hate it.
Send lots of progress pics.
There's almost 3 feet of deck space. Whaddyawant?
:) Thanks again for that roof vent>
Ran out of Resin Epoxy and $$$, so had to switch to some work that was waiting, already parts purchased.
Decided to install the NEW OLD STOCK,...
John, Time to change your avatar from that Bimini top. :)
I'm proud to be you Skippy friend. Your work is professional, and inspirational.
You are lucky to have the family support. Blessed.
Gorgeous, and mighty professional job.
More pics of Starboard tranition flange for sidewall.
Yes, Mates, updates.
P house nearing completion. If you don't count the roof, fairing and priming the sides.
But I plan to launch without the...
Stay with the diesel.
thats a damn fine P house you're making.
Simple, good looking and perfect, acutally. Smart man.
I'm building one, and it...
John, Volvo has drilled and tapped, several parts, on the 280, allowing the tapped holes to act as drivers.
The flange on the Electro Mechanical...
Forward part of Pilothouse, glassed. Can move boat to Mission bay boat club, from my house in Lemon Grove.
Next Tues, drop engine...
Cleaned up steep foredeck, painted Interlux Primer, Pumice non skid.
P house forward section glassed, in and out. 1708, and epoxy resin....
Cleaned up steep foredeck to paint non skid.
Took a day off from fiberglass grinding and slaving.
I feel, its a keeper.
Many of you may feel it's ugly. It's not as great as I had envisioned, but i have to roll with it, finish it, and get...
Thanks, John. I'm afraid it's pretty ugly right now. But I'm gonna have to roll with it. It may look better after the first coat of white...
I tried to get the SOB off and gave up. I finally moved it enough out of the way, last night, so I can glass, and Grind.
I may have to keep it on...
Closer to completion, at least. Over the hump.
Now for some easy glassing.
Great looking boat, John.
Yes, lots of love and quality work went into that boat.
Good luck with sale, and new boat.
I know Tuna Joe!
More Progress on Pilothouse. Was a bitch getting the second window close to symmetry with the first one.
I think, when I'm all done, it will...
Awesome boat. Beauty.
Awesome boat, congrats.
Finally got one Lexan window sitting in unfinished ledge.
So clear, hard to see.
The whole thing should look awesome when finished.
More pilothouse progress.
Ran out of $$ for materials, so next progress will have to wait till August 1.
Window is 1/4' LEXAN, you can see...
Yes, beautiful Pilothouse, and new engines.
You must be stoked.
More Glass. Stitchmat, very difficult to wet out, from a dry start, on a vertical surface, with Epoxy resin.
Next phase of job, will wet out...
Sleeping w one eye open
Lots of work glassing inside of balsa plug, cutting out rough window openings, which will all be melded to the curves....
Interlux Bilge Kote. It comes in white or Grey.
Expensive, slippery as hell.
I mixed some pumice in the last Coat,in the open space forward of...
Got the Plug off the mold yesterday. Tonight, I'll be applying a Second layer of glass over the 3/16" Balsa plug while working on the sawhorse....
Thanks for posting the pics, and text.
You are doing serious professional work, there.
Copied from Spearboard
I hope you guys don't mind me posting the progress here.
Some day soon, I hope to actually have some dive and fishing...
The Plywood Mold process, reminds me of a Turtle shell.
I was far too ambitious with the curves.
Glassing the forward, 3/16"balsa plug,...
more fabbing. Sharp corners will be cut off, more "bending" plywood will be used to meld top and bottom of windshield. Will be two window design....
Fabbing up a Pilot house, kind of a spontaneous decision, guided by ignorant bliss.
If I come up with a good design, then I'll start glassing....
Used Venturi windshield, and Bimini for Skipjack 28 for sale.
I'm ordering a hardtop.
Had to remove mirrored wall covering and drill out all the wooden plugs in the teak trim, so I could route #4 anchor winch cables through head, to...
Kept the Lewmar Profish windlass, when sold Proline.
Found #4 battery cable Ancor brand on sale at Defender, and bought 50ft each of red and...
Does the head have a shower?
Can you send more pics of the floor in the head? Maybe there is a shower sump, etc.
I want to see if...
The builder did not use an adequate design for the routing of wires, control cables, and the fat steering cable, between the control console, and...
Now just need to finish outer transom hull, w epoxy primer Interlux 2000, replace engine, Shield, and new outdrive coming in two weeks.
Thats an awesome rebuild. I'm going to watch for a Stringari to build.
Latest update, Port Transom 80% complete.
much fewer blisters on this side.
Shield, (Used) being fitted, holes drilled, and a little more cutting...
I bought it directly from Bluebird factory. When I had the first 25 ft Skipjack Fisherman. After several engine pulls, got tired of renting, and I...
No way. I've always wanted a Dirty Girl. I'm a Dirty old Man. This Skipjack is not a Phoenix from the ashes, but a Dirty old witch, from the tar...
more DG pics
Good before/after look of transom.
Insdide transom needed alteration, to accept Y Pipe, protruding boss.
Mia, modeling Red Cabo,...
I've got a few more pics. Bored at work.
Hey, how do you put images between text?
Lovely outdrive, yes?
This was after Pressure wash, and acid...
Just a few more here.
There were lots of blisters on the starboard side, as well.
I suspect there will be a few on the Port side, but 75% of...
More Starb transom repair.
Not all pics in chronological order. transom wood very rotten this side. Shield was rotten through,at Y pipe. Boat was...
More pics of Transom Repair, Starboard
Picked up this 28 in the Stockton Delta.
Intro on "Check out my Skipjack" pg 18 or 19.
Been working on her since Oct 11.
Nearly done, hope...
Nice Job on that clean up. Thanks for sharing
I might be interested in the Outdrive, only, if you happen to split it up.
also, I need a Y pipe, and a short two piece flywheel adapter.
thanks, Tom. I checked those Y pipes out.
His are a little different, and won't work. I'm still looking. :)
Is that a Todd, 5 star, with removeable arm rests?
i was there too. I couldn't find it, and the service there is horrible.
They were clueless about it.
Having trouble adding an image.
Here is the old one I broke.
[ATTACH]Need Two Y-Pipes and one flywheel adapter.
This is on early 80"s vintage Volvo 280 and Chevy V-8 application.
Yes, I would like his number, please.
mine is 510-220-1356
Got a nice tank, and thanks everyone.
looking for a Offshore, or like. 30 to 45 gallon. Used
If any fellows out there...
Does anyone local to San Diego, have a Skipjack FB 28 w a Pilothouse, I can look at up close, and get some measurements.
I want to try and make...
posting for my Bud, Mike J.
Sorry bout the poor quality night pics ala cell phone.
seat looks in good condition.
I think Mike is...
Update on Dirty Girl.
Trashed one of the Tilt Electro housings. Trying to remove. Looks like I'll have to pull motor now to access shield, and...
Do you have any of this left.
I need a transom shield, outdrives, and an electric trim assy.
John 510-220-1356 San Diego.
do you still have the outdrive, transom shield, or trim motor
510-220-1356 San Diego
So now I need wiring diagram for AQ260 engine harness, and gave up on the owners manual.
I called Jack Cole this morning. He was very pleasant,...
Finally home from Stockton to San Diego on Halloween.
Been spending many hours pulling derelict electronics wiring and installing new radar,...
I just bought a new trailer from Wayne, for my 28 ft Skipjack.
Triple axle aluminum. Disc brakes on two axles.
Trailer was set up perfectly...
Your waste holding tank, is there an access cover anywhere?, like in the aft bunk?
For the fresh water galley system, and the water heater, I...
Does anyone have an owner's manual for an older 28 Skipjack.
Mine is a 1979.
Having trouble finding holding tank, or where one could be....
I have no Idea what the 400 engines was about.
Does anyone know of a "400"? Did Volvo make a 400?
It was on the advert though.
Lower unit, low hours.$1,000
Mid section, exhaust housing, and Hydraulics. $400
Top cowl $300
Bottom cowls, $250
Very hard to find, 4 function gauge for early Optimax, non digitals, aka analog
I had this on my 2000 225 hp.
comes with 20 ft cable.
I sold my Proline 21.5. and bought this Clean Skippy up in Stockton.
I am waiting for Wayne, at West Coast Trailer, to make my...
Triple axle or possibly dual if HD.
Cannot afford New.
How much do you want for the other trailer triple axle.
send pics to me please
can you finance? Just blew my 2000 225 Opti today.
are you selling any smartcraft gauges
Nice looking boat.
Do you have other pics of interior and engine.
Is boat in San Pedro, as stern indicates?
a garmin 172. I lived in NOr cal at the time.
Now I live in SO cal.
Garmin Bluechart MUSO22R
It is like a 1/2" wide by 2" long....
I have a Garmin Bluechart MUSO22R
Is that what you're looking for?
John in San Diego
Looking for discontinued, Smartcraft Tach. #859067A1
Or Four function gauge, 835360A2
Both are discontinued.
This is for my 2000 225hp...
I would like to see the pics.
I have a round bait tank.
asking 75, or offer.
510-220-1356 in San DIego
Looks like you guys were near where I was.
Good work on haul
Wind blew my new hat off Yak while diving. New Years nite at 1900 hr
Wind blew my new hat off Yak while diving. New Years nite at 1900 hr
Aussie canvas, red Pelican mini flasher.
Name and number inside hat....
Separate names with a comma.