The bed liner fix will lower the resale value of the boat.
These guys rebuild them.
Thanks that is what i was talking about.
Where can one get a box like the one in the back? Cooler box?[IMG]
So far nothing in his price range, and maybe never
Just run them unit they go, add a bracket and a single 200 or twins. Easy to add a bracket with sea drives.
Double for Hodges
Been a mechanic for 29 years and work on many toyota all trucks have there problem. And yes I've seen many chevy and ford with over 500k miles...
Always one in the bunch.
My boss has a 2016 it has 145k miles no issues, has only done the brakes and regular Maintenance. We drive a lot for work and he buying another...
What do you mean “offshore”. Chasing tuna 50 miles or 10 miles up and down the coast for rockfish? Like in SF Bay Area. Don’t know where or what...
Remember that will up in value, boats don’t. But I guess we don’t fish or buy boats to make money.
Nice ride good luck
Some fucked up shit, and they gave each other a high 5.
Sounds like it’s in partially gears. Look at the starter is it leasing all the way? Not spinning while running. Not normal, maybe time to find a...
You don’t feel the chop it rides a lot softer way less banging in chop what I would do in my last boat 21 striper its would bang in chop doing...
4 or 5 days ok, you may get some slime or discoloration. Slime will wash off, discoloration may need muriatic acid to clean off the rust staining
18 to 28 makes the difference, but most boats have a variable dead rise Farallon have a fixed from front to back. Also most boats are heavy at...
My last boat a striper has about the same walk around. One time I left the dock and didn’t raise the vhf had to in open water and it was claim, I...
The only thing I can think of is there any way you can slide a wrench through the fill to hold it from the inside. Or cut off the 90, pull the...
Ad is from 2016, I guess with all the site updates old ads are coming up
Here’s a 43 but I’ve heard bad things about all the older Volvos
Why just not buy from them?
It maybe cheap for a reason, Volvo loves there parts so upkeep will be high on an old diesel
All boats have traded off.
Looks like st235-80r16 trailer tires load range E
4 bbl is more efficient than a 2bbl as long as you don’t open the secondary’s. Once they open MPG goes out the door.
Trim tabs should be out as far as they can be but off the chins. No way for transom mount transducer you will loose Bottom at any speed.
It’s been for sale for a while now
Tax, paid every year on the 2 new boats I had. Not sure if it’s an age or value thing with boats? My current boat used and older is worth more...
Places like Florida have a huge boating population that keep boats for a short time if by choice or by bad weather, California just doesn’t have...
I was following that project and felt bad when that happened. But I did see it coming. You can remove all the framing and think it will hold up.
Its nothing fancy.
I’ve used this at work and on the boat. It’s great for the hard to reach and tight places that Manuel plies style cable crimped can’t get to.
Looks like 15 foot mako? Maybe 115 or 150? Sound like a head gasket or coolant passage gasket?
I had the same panel on my striper it cracked as well. Purchased a peace of starboard the same thickness from taps practices and used the old one...
From his signature it’s a 23’
Yep that’s it
I am not sure but does it even have a sonar capabilities? I think the gp7000f has a sonar not the nt
He’s good as is his videos, he changed his format in the last month or so. More videos be put out some are not really informative, but the old...
Also it’s from 2016
How about some pics of the problems areas? If by hull you men the deck Line x will work if done right. Hard to understand gelcoat completly...
Not sure if this is what you need, I’ve seen aftermaket ones that are pinned incorrectly we just end up repining them at work. Although it says it...
Maybe you meant to turbos sorry my misunderstanding, I was thinking re-sleeving the cylinders.
I didn’t think that 3208’s can be re-sleeved.
Starter will have to affect to idle speed. You have have hit the linkage some where while workimg on it.
Pm’ed you let me know
Are theses complete for both sides? I’m looking for some but hopefully can be added to an easy loader trailer. And your in Bodega. Let me know...
I have a vx1 works great does what I need. I would only up grade if it was a night and day difference. I dont know what the difference really is...
I have 25 and it takes big chop no problem best riding boat I’ve owned so far. I don’t even use the trim tabs.
No limits with Electradyne hauler you can pull up the ocean floor with it
Looking forward to the build
Did you have fuel in the bilge before you started pump out the tank? If not check your connection to the set up you are using to pump out the fuel.
I the difference is the canyon runner is a long cabin. Not sure if the use the model name canyon runner any more. May have fridge, micro, sink and...
Nice looking boat
I alway see guys at the ramp with SUV,s and the tail gate open and having to claim thought the truck just to get to the tongue of the trailer. I...
I also have a direct drive, the learning curve still learning they don’t steer in reverse it all. 26 years of boat handling and it seem with DD...
Cost is why I when with gas. I would have love a Cummins. The thing about Volvo’s is they think there parts are made of gold and want every penny...
Replaced the fuel tanks new deck and hatches, repowered with low hour 5.7 Mercruiser, rewired the whole boat
Still need to reinstall the rear cab bulk head
It’s from the Garmin site for that unit. All FF you can adjust the offset for temp and even the depth
Setting the Water Temperature Offset
Before you can set the water temperature offset, you must have a NMEA® 0183 water-temperature sensor...
One more thing to check if it is a direct drive, as this happened to me make sure you are checking the trans level correctly. Or it will be low....
Is that box close when charging? Charging batteries make hydrogen sulfate gas if not vented and if any spark unsafe electrical equipment it will...
Very sad, a few years go during the Mavericks competition in Halfmoon bay I was headed in and still a mile from the Piller point harbor entrance,...
I’ve never owned an Osprey, I was thinking of one for a while until I got my Farallon.
I was told some of years had fish boxes that drained into...
Check and replaced the fuel filters, most of the fuel problems are from the filters.
I wouldn’t, this wasn’t a bass boat with low bows it can happen.
My uncle has the same motor on his 25foot Aqua sport WA and seems to do fine.
Keep an eye out they come up all the time winter maybe a better...
Don’t know them and maybe a little too far and only 200hp,
but it a 2005 in your price range...
It can take months to sell a boat, don’t start low balling yourself.
The cable shaft at the engine needs to be centered so you have the the turns to each side. Also the pivot shaft on the steering cable to the...
Fixed is better, the nature piviting jacks with caster wheel twists the jack. Also if you can remove it and not let it get in the salt water it...
Yeah too close to be google (clear), good going on the sale.
Was the last pic from google map? They took a pic of you in front on the boat?
He maybe saying there’s more info on the updates
No throttle to start but is it cranking when it doesn’t start. Maybe the nuatrol safety switch needs adjusting.
You can purchase extra transducers, you will extra power wires, mounting gimbal and some way to mount the transducer on the transom.
Yeah a 22 Farallon would be your best bet. High gunnels are key for safe offshore.
Look for a 22 with an outboard on a bracket.
You can also...
Use it for a while and the name will come to you.
She’s coming along, lookin good.
Stainless and remember to bond them
Just looks like a resin crack to me, as long as it not the glass cloth it’s fine.
I don’t like it.
JK, only because I don’t have a rod closet on my boat. LOL
Looks great, so jealous
Looks good, nice job
4 blade prop give better hole shot and less vibration but loses efficiency at higher rpm’s hence less mpg
Not too sure about your stripper but I had a 2000 2100 wa and I was thinking the same thing, but when trying to remove the Tank from the factory...
This add is from 2013
20 inch and 260 lbs.
Do you have the number for San Juan, I have a full system. 5.7L DD. My engine runs at 145 or so but manifold gets up to 220 deg’s at speeds. All...
I think it used to make those Hard right and left turns
Not sure what they go for but every time I’m look for something
No these guys have beeen the lowest. And free shipping...
Coosa is great did my deck.
Starboard? nothing sticks to it and is very slippery when wet.
Wood is maybe your best bet. Epoxy it and Kiwi grip it
Unless you go Coosa board...
“You can solder connections if you like but crimp them first. ABYC standards do not prohibit...
What will you be pulling with it? Lobster pot? It can pull 100 lbs. commercial crab pots easy. But if your pulling only lobsrter traps no need...
Can't tell if it's the same but bid difference in price....
Can you remove the pulpit?
Never heard of paperless title for a boat, trailers yes. But you can still one.
It's basically a trucks drivetrain.
contact Bennett they have great service help.
yeah always find Hodges Marine with the best prices on line. no tax and free shipping too.
find the marina and slip it for the that week
and I missed this by a day. I need 2
if your budget is around a...
looks like he made his own deck hatches, you can but something like that that seal and latch made by http://www.anchorhatches.com/
and buy them...
I would pull the prop and check the seal for any threads that may have wrapped the shaft, and check the lower end oil. before going out to be safe
I have an electra-dyne maybe over kill for square traps.
also check out http://ezpull.net/ecf/index.php
make sure if you install them they are above the water line or you will be making this worse.
had them on my striper and if you stand in the...
big differance in OEM made in China and Aftermarket made in China.
just look at electronics most are made in china top brands are good and...
works great spray it on wait a little and hose it off most of the time no scrubbing
USCG and EPA Guidline for fuel systems
EPA Documents on Evaporative Emissions...
Puna Shibi was last seen:
Mar 31, 2017
3 year old thread,
my dad had an 80 mercury car that would run great and very hard starts after running for a while. it took to me for ever to figure it out, I only...
Bennett all the way, if not only for the customer service
freezer. and dont make holes in the side of the tube. LOL....
your best bet is a radar arch find a used one or new. you can mount them like some sail boats on a pole but on a power boat it will shake a lot as...
cut the plug out reconnect with good marine butt connectors with heatshrink. call it a day
sounds more like the PO didn't know why they mounted the transducer on the transom. yamaha doenst use a transducer.
fish finder maybe came with a...
nothing in the manual saying it has XM...
that's what i did, works great
they are great, but if I remember correctly they should alway be mounted with the shaft on the bottom? something to do with the seal.
cant tell what we looking at?
fresh water cooling is the best thing you can do to an inboard. get the full system not half
killer set up
I had a 2000 2100 striper and the only problem I had was a leak the top of the tank was glued (lack of a better word) and came unglued fill the...
dont know anyone that mak house calls, do you have any idea what problems he's having?
that is cool.
or if you don't want to go as far, may be glass something about 6 inches tall and mount the old windshield on it?
have the seats been replaced and maybe they are taller?
don't really know of easy way to fix the windshield height, sorry
they both use a 10 pins duser, I would think it will work
solid core wire will brake from the vibration. I use sealed lights and only replace a burned out light every few years and may be a few broken...
he's right "In combination with a bilge pump", a self-bailing cockpit"
"bay boat" not for open ocean, it's a little more than a bass boat very low gunnels. also dead rise is only 12* and compaired to there deep "V"...
love those internet fixes
looks like the builder meant it to be a grab handle while climbing from the water?
not sure if it the right size
not a 12 but a 14, and not mine
the length of the boat and trailer frame doesn't have to be the same, my farallon trailer doesn't go to the transom the lights are like 3 feet...
electric over hydro brakes is a must if you are get a new trailer
don't grind or sand galvanised trailer is will rust faster
buy a bigger outboard (HP)
last i heard pacific was closing the doors in fremont.
try here lots a striper owners
he ended selling the boat cant remember why?...
soaping water for lube just like when you instal in bike grips. water wont damage the rubber and after the water dries and soap hold them in better
WOW 5 year old thread
haven't had much time to work on her, with work and try to get ready for a long awaited vacation in 10 days. Hawaii here I came.
Mercruiser used them
a few more pic taken today
front fish hold hatch frame, still need finish work and install
frame an hatch...
I wanted to have the boat on the water last summer but new position at work takes up more time now. so work is going slow. I do have to take new...
new custom gauge panel
[ATTACH] [ATTACH] [ATTACH]
removed the bulkhead to make it easier to work inside. also removed side panels
parts of which are glassed in and a B to get to.
I will have to take more pictures as this is around the time my cell phone took a dump.
added Awlgril non skid in light gray matte finish[ATTACH]...
He guys, I don't normally start these. and never though I would post this, so I didn't take pictures of everything and a few lost from a damaged...
I would only use 5200 if you dont plan to take it apart anytime soon, 4200 works just as good.
It said SOLD
from one of the pictures its a 17'
thanks for the replies
I can get a new OEM powerhead from Yamaha for $6500, but was trying to save a little $
Looking for a good source for a reman power head for A 2002 Yamaha 200 HPDI Z200
This is for my uncle he had a "friend" clean his boat and the...
really think the problem is the single axle trailer, look at my rig and boat F150 and it lowered with stock springs, towing a 25 Farallon dry is...
i found this on line.
Attach a pressure tester to oil level hole,
and pressurize drive to 3-5 PSI Rotate propeller
shaft and universal joint...
looks like shes coming along, good work. still putting mine together
my not be the one your asking about but they do great work and what ever you want on the switches. i had mine made with them very happy....
shes coming together.
I think its a diesel, better be for 37K alone for
"engine and out drive plus new batteries were 37k alone"
sometimes if the complaint was documented before you may still be able to have it warrantied, I had that done on a truck I had, always loosing...
Cleveland and winsor are very different engine not one part will cross to one another
I use FishAlerts and it works great.
good boats and get the bigger engine
great find, have fun getting it back on the water
depends how the hull was prep, if the gel coat was sanded with very coarse grit paper. it may look real bad.
heard good things about dustless...
is the 3700 too wide?
dimensions are 14x9.13x 2
dont slip with out drives
check the turbo may have cracked a fin
4 stroke no more oil.
Thanks will check those out, didn't like the Canon ones on my last boat
what type are the flat line clips.
Boats looking good.
it seems others have had problems with Allmand boats...
none are bullet proof, I think the location plays a big part on how long it lasts.
My old boat the pump would go bad every season, 5 pumps in 5...
you are right Yamaha flow sensor, but dont know why it would have a on/off switch?
may have crossed the wire following them back?
fuel shout off valve? or what they said
Sad, they could have been great boats.
Thanks to shedding light in this for me.
not trying reopen old wounds, I know Davidson closed up shop. But was it do to poor workmanship "thin hull glass".
I never found out why. you can...
Fuel hose must now meet much stricter standards for evaporative emissions. Look for hose labeled USCG Type A1-15, USCG Type B1-15. This means it...
are connected to shore power, do you have a galvanic isolator installed on the shore power? the problem may not be with your boat but another next...
they are not that bad many guys have problem and from then on they put them down. I've seen too mean OB throw a rod, head gasket etc.... and...
they are Vortec engines and should have SX or DP-S drives all good. and not to send you to other site but have you check...
I agree closed cooling is the way to go, but with that said. I've owned 3 other I/O's with out and having done my own service and wash down with...
manifolds and oil pans are the major problem with gas inboards, if the bilge get a lot of salt water in it the oil pan will rust. the manifolds...
have you looked on ebay?
it seems you have 2 choices
ive been see this guy sell Skip jack factory rub rail on CL.
Dont know him
oh forget Raymarine, I had 2 in different boats and I hate them. failed or never worked right
they seem to come out with a different model every...
go talk to
Fred Fritz Electronics Inc
Marine Supply Store
821 Petaluma Blvd N # E
He will help you find the right product for...
its all comfort and fuel costs here, over there its show and go
The Volvo on my last boat spec 40wt synthetic oil, but one year I was unable to locate it. I found out that Volvo changed the spec to 15-40...
its a good drive , like SkipJack said just service the props. I've only heard yearly, but use that really sticky marine grease
been wanting to order one my self but the shipping is crazy like $200 eco shipping
have you talked to your insurance, you may have to pay a deductible. being a Parker I would have it repaired correctly, if it was some old run...
im guessing this is the motor you have you can see the air cleaner under the plastic cover.
air cleaner next to exhaust riser.
shift cables are cheap something like 40 to 50 bucks. you need to know what you have as the shift handle type, some cable have numbers on the the...
mechanic in a can doesn't work, all that does is swells up the seals to try and make it stop leaking but it can make it leak more. over the years...
3 things for an engine to start, Fuel, Spark and compression. will the engine start if you spay carb cleaner in intake?
do you have the check...
con-grades nice boat.
bad ass man
I would say it's no difference than using salt-away in the birth to clean your engine after use.
HA HA I remember when I was like 6 and my mom would use iron-on's to fix the holes on my jeans, they would last a few months. but with that said,...
Easyoff oven cleaner
looking good man.
looking real good:urno1:, I guessing its a kit I don't see any tool for bending the aluminum etc???
great work either way
thats a Volvo diesel with out-drive that should drop in no problem at all.
the only thing is Volvo thinks their shit is may of gold and parts are...
I would sell the boat before re-powering for $38g's
no interference and just make sure either one doesn't physically obstruct the other.
there just recievers
cant saying anything about Kevlar.
i would ride both and get a feel for them and make your decision from that. get the engines by a mech.
I think he was saying he think sea swirl was cutting corners around that time.
I think it was later around 2002 or so when they sold and...
I had a 2000 striper WA great boat didn't have many problem but i had a Volvo IO now I would stay away from Fitch motors I know some say a few are...
the brakes are still hydro at the wheels its the master cylinder that is electric.
no surge master to deal with electric master cylinder that...
cummins is just to big and torque for a transom mount also you will be eating drives every few years you. if you want a diesel go with Volvo D4 or...
Kodiak all stainless , the only way to go, Titan second never liked tie down
also is you can go electric over hydro
I agree with Slater
make sure to vent that battery to the outside, battery gases are not a good thing in closed places
this add is from 2010 i would think its been sold by now
a high current load or shorted load e.a. starter is what blows fuses. bigger batteries will give you higher amp hours or high cranking amps.
battery size doesn't blow fuses the loads do.
Good work, I'm in the middle of something similar. purchased a 91 25' Whale back. prior owner started hacking up the rear deck trying to figure...
yes Konrad is one that will work but not cheap. DD or V drive is the way to go with 5.9 Cummins
hold to find an out-drive that will hold up to a Cummins
also mine mine just a CL find
Not mine just found it on CL
Les you still around? here's a clean looking Farallon Fisherman 25 looks clean for the price.
Don't know the owner....
leave it, you will lose a lot of room
good info here.
I don't think ICOM has dropped quailty it's just that others are catching up. Yes ICOM and Standard are the best right now. IMO
I was thing the same thing, ive seen this just havent tried it yet. its one of those as seen on TV thing rug for the shower or tub....
power steering? may be bad happened to mine, but it was a Volvo Penta rack was replaced under warranty.
yes Digital is just the brand
I like digital antennas
vids no worky?
yeah cover and bomb it. boat cover, just tape up any holes
I don't have one, wanted one a few years ago but had a new boat at the time didn't want to loose my as on the current boat. I was looking at the...
they just left the nest and are looking for a new one. finds some bug bombs, it wouldn't hurt....
Remember the added costs of 2 stroke oil for etecs.
looks great, yeah not chap. you will never have to paint or replace rot.
Twin Rivers Marine Insurance Agency, Inc.
7 Marina Plaza
Antioch, CA 94509
that's 500 HP that should be fine. reminder its a 26 foot + boat with 7000 lbs.+ wet weight not a 2000 lbs. jet boat.
you don't need that much HP...
ebay there may be someone out there that can use a replacement head unit, but i wouldnt install it.
is this the one in Morgan hill? Looked at it for my uncle. The owner died shorty after buying the boat and starting to install the electrics. I...
OB's cost a lot to replace, if you buy a used boat with old OB's make sure to add replacing them to the final cost.
"My Arima has metal stringers"
you sure about that?
I've seen this on CL
$85k, Custom Three axel Pacific Trailer with Kodiac Disc Brakes included!
I'll place the dollar sign in front of the price.
there has been a few project Farallons out there haven't seen them for a while. Keep an eye open and one may show up.
what area are you located?
stopping is the most important part
that's going to be very hard to find on a running boat. in this price range it will need an engine or new fuel tanks.
need to know what price range your looking for? many out there.
cant you just have a machine shop replace the ring gear?
are you talking about the Radon?
link was not working
as long as you know what a kicker is for trolling and emergency back up.
your not going to get on plane with kicker only hull speed. you will be...
i've seen horn alarms made for tuna meat lines but not fishing rods
that is some nice dime laying
very rare setup
is your parking brake adjusted correctly, if when you move the park to drive and you have a load clunk and sometimes shift is hard to move, the...
cant really give you exact LOA but without the trailer it's 31.4 add another 6 or 7 feet for the trailer?
Admiral 250 EX
nice boat good luck with the sale, looks like Galvanized
whataboat was last seen:
Jan 5, 2015
hasn't been on for a while
rode hard and put a way wet
only a 4 cyl?
yeah i don't think there's any difference in safety on 22 to 25, just more room. sometimes more fuel capacity.
try www.boatdiesel.com or www.thehulltruth.com if you get any help here.
pics didn't work
not mine but looks clean
I would go with the GW better ride better hull, the only problem would be the OB 2 stroke and 97 it's almost time to replace it cost is high for...
most of the time it's not just longer but wider and taller. I went from 21 foot to 25 feet and i think my old boat would fit on the back deck? may...
gorgeous just gorgeous
will you ship to San Jose ca?
trim tabs 24 inch, complete with pump $150
does it have the control switch?
any pics of pump and switch?
lift the drive up and loosen the worm drive clamp that hold the rubber bellows on and the water pick up hose clamp and then lower the drive so its...
yep with no support under the deck you can walk on it with little to no flex, the deck on the Farallon is about 1 1/8" thick. it was not cheap...
I used Coosa core on a wood form and vacuum pressed 6 layers of 1708 on each side to get to the correct deck thickness
but if you just want to...
not mine, but not sure if you can see it. from CSFC 86 whale-back DD Cummins, but he's looking fir 60k...
i looked at a few I/O's(4) 86,2-88 and a 89 before finding my 91 DD. and there are a few on this board that are I/O's. anyways $69K overpriced and...
if i remember right that boat had a out drive it was not DD.
short block = no heads, long block = w/ heads
I KNOW YOU WHERE LOOKING FOR ONE, MAYBE A GOOD DEAL. THIS WAS FORE SALE A YEAR AGO AND SOLD TO SOMEONE IN SANTA CRUZ. I'VE SEEN IT IN STORAGE OFF...
If you haven't try here.
I pulled the tank in my 2000 2100 Striper different model but in the same ball...
any pictures also 1000 hours on new power head whats total hours?
looks like the Shamrock may have been sold
not sure if you want to get into a boat that old alot of wood to think about. Ive see this for a while seems like a great deal...
I think you can reg as home made
don't know what all the put downs are for all I see is a dirty boat that needs a little cleaning and maintenance.
Not mine but I do like them.
Theirs not much to the seam where the deck meets the hull seem it was fill with peaces of wood and then fill with epoxy not a big deal, but the...
If your questioning it, pass on it
may also need tanks.
dirty but doesn't look that bad
some info here
why do you think scam. looks like lajit site
Cummins is too tall and too heavy. And you will blow drives every few years. Volvo or Yanmar will be your only choice, both are very costly
Direct shaft and a diesel would be the best set up, outboards that far back on a bracket would be a PITA to fish around. And twin outboards would...
not on a boat that big
310- nine 7 7 - 6 1 0 nine
Not affiliated. http://ventura.craigslist.org/boa/4812342257.html
pull the motors and install a braket and a 300hp
you will not have any problems towing that... 4WD?
The thing about Volvo's is they are very proud of the product and they demand a they high dollar for them.
always love an early Christmas. been looking for new lights you have any info on them?
what brand hatches are they? are round deck plates or door style?...
The closer the the boat weight is to the tow vehicle weight is where the problems with towing begins. Almost all 1/2 ton and 3/4 ton trucks have...
Trophy's are good starter boats get one with a later model engine and have it checked
Take a boating course good info if you have never boated before. and you may get a discount from your boat insurance.
says sold at the top
can be one or the other
OK 7.4 gas Chevy find the problem first may be a small problem corroded connections etc.... 3 things needed for a gas motor to run. Fuel,...
direct drive was only on 25 and bigger the smaller sportsman was only outboard or IO
not mine but looks good
16 foot Livingston, not mine
here you half way there.
you would have to test ride both boats but the Wellcraft has a 4 stroke and and only one year old should still be under warranty
I look at it this way , you know the headaches your boat has and a new motor you will have less, now buy someone else headache with a year old...
I've only seen a few with outboards (may be the best set up on the sportsman) but very rare
I now your asking to look at one in your area,
Theirs a nice one in the bay area with a diesel
you may have seen this dont know the price
25k, thats about the ball park as per the descipition. most Farallon's had 360 as mine did also and it was fine but more is best lol
most people hate I/O's and the only way to go is outboard's. many boats out there have I/O's if taken care of you shouldn't have any problems. if...
C Dory, Boston whalers, Arima all a little small somewhat flat hull at transom and small engines. Also have a big following and can be pricey I've...
how about a trolly craft
dont know your location but this could be a good deal?
Maybe a 26' Seaway seems to be a good deal but hard to see from the picture
ALMOST TOO GOOD TO BE TRUE?
I waited almost a year before I found mine and almost settled a few times. I decided not to install a diesel due to cost of replacement and...
If I was still looking I would check this boat out
keep in mind old Farallons most of the time need the fuel tanks replaced
I got mine cheap so I can replace the tanks engine and deck
try asking here
looks like a few closed places
Definitions: MPA, Marine Managed Area, and Special Closure
State Marine Reserve (Title 14 Section...
wrong forum this is for selling boats. and I think we need more info on what your working on
you may be better off calling him. His number is listed above. It doesn't seem he visits this site that often hes only posted here once.
electric brakes over hydrolic
a lot of info on Striper
Separate names with a comma.