Search results

  1. walkersoccer

    For Sale Mercury Vengeance prop 14 inch NIB

    you have any 14"X15 or similar props for a Yamaha 150?
  2. walkersoccer

    For Sale Parker 2120

    Bump for a super clean 2120
  3. walkersoccer

    For Sale Custom fillet and hunting knives

    Discount on above fillet knife before Xmas. Contact me at+18052101493
  4. walkersoccer

    For Sale Custom fillet and hunting knives

    I just finished this regular fillet and it is the last knife I will have done before xmas. Wood is ca. Desert ironwood. Blade is 440c stainless. Everything done by hand including leather sheath. I will engrave your name or boat name on it. Roy 805 2101493
  5. walkersoccer

    For Sale Underwater camera/video screen

    Still have this in my garage. 25.00 Great xmas present for kids or underwater hot tub video (not for the kids)
  6. walkersoccer

    Limits on Yellowtail 277 Bank 11.18.19

    Well done bud. Hopefully your knife worked out well cuttin those yt.
  7. walkersoccer

    Farming Yellowtail at Ancapa and chasing Marlin.

    Ok thanks for the info appreciate it
  8. walkersoccer

    Farming Yellowtail at Ancapa and chasing Marlin.

    Thanks for the report. Havent been able to find any mackerel out there over the summer. I normally head to mid santa Cruz and don't go to the gap. Where did you find them?
  9. walkersoccer

    Farming Yellowtail at Ancapa and chasing Marlin.

    Thanks for the report. Havent been able to find any mackerel out there over the summer. I normally head to mid santa Cruz and don't go to the gap. Where did you find them?
  10. walkersoccer

    Farming Yellowtail at Ancapa and chasing Marlin.

    Thanks for the report. Havent been able to find any mackerel out there over the summer. I normally head to mid santa Cruz and don't go to the gap. Where did you find them?
  11. walkersoccer

    WTB Lowrance LCX 113 or similar for LRA1500 Radar

    It would be great but I don’t think so. This is the list. Thanks for the response bro
  12. walkersoccer

    WTB Lowrance LCX 113 or similar for LRA1500 Radar

    Somebody has to have an older Lowrance that will work with my LRA Radar
  13. walkersoccer

    For Sale Custom fillet and hunting knives

    Last two Cerakoted blades available at a discount. Larger blade is thicker and has minimal flex for larger fish or carving. Smaller is good for everything with medium flex. Both are made to handle saltwater environment and come with a custom leather sheath..also, have your name or boat mane...
  14. walkersoccer

    WTB Lowrance LCX 113 or similar for LRA1500 Radar

    Looking for an older Lowrance LCX113, Global Map or LMS that will support my LRA1500 Radar. My LMS525C is starting to have some issues. Purchase or trade for a custom Fillet Knife
  15. walkersoccer

    For Sale Custom fillet and hunting knives

    I still have two of these cerakoted fillet knives available at a discounted rate.. 805 210-1493 Also looking for a lowrance Lcx! Lms or global map type mfd that will work with my lowrance Lra 1500 radar to buy or trade
  16. walkersoccer

    For Sale Custom fillet and hunting knives

    Just finished this for a BD brother. Burnt bronze cerakote coated fillet blade. Engraving was done freehand and turned out awesome. I have a few of these left and ready. I can make the cord colors whatever you want.
  17. walkersoccer

    For Sale Custom fillet and hunting knives

    Tactical blades are 260 with a kydex sheath and Molle attachment. A bit more if you want cerakote. That is engraved. Tac blades are thick D2 Tool Steel. In the picture, the top and bottom are available. The top is thicker steel with little flex for big fish. The bottom is thinner with some...
  18. walkersoccer

    For Sale Custom fillet and hunting knives

    New burnt bronze Cerakote fillet knives available. These two are available at a discounted price. Can take as is or have engraving added. These are medium size and flex. The ultimate saltwater fillet knife. Also have one larger for the cow tuna guys.
  19. walkersoccer

    TRADE Newell 332-5 for Lexa 300 or 400

    TTT. I have two of these. They are awesome on a jig stick..
  20. walkersoccer

    TRADE Newell 332-5 for Lexa 300 or 400

    Only used a couple times. Like new original condition. With original clamp. No box Trade for Lexa 300 or 400 In Moorpark ca Roy 805 2101493
  21. walkersoccer

    Joining the Family

    congrats! awesome boat
  22. walkersoccer

    SOLD Sold

    interested in Lexa. 805 210-1493
  23. walkersoccer

    Bait Tank on Parker 2120

    Same setup as Sagedaddy on my 2120 and love it. Just fished with him on his boat last week and held the sardines fresh all day
  24. walkersoccer

    For Sale Custom fillet and hunting knives

    New Cerakote coated fillet knives. The ultimate saltwater knife. Different colors available. Hydro-dip designs over Cerakote coming soon.
  25. walkersoccer

    For Sale Custom fillet and hunting knives

    I call this The Pit Boss. Made for all of us Traeger weekend warriors that need a proper knife for trimming or carving meat. Made from 440C, Bocote wood, red G10 liners and Heat treated by Boss in Idaho to the perfect Rockwell hardness. Let me know if you want/need one and we can decide what...
  26. walkersoccer

    WTB Yamaha ss 15 pitch prop buy or trade for knife

    I’m in Moorpark. That works. Can you call me
  27. walkersoccer

    WTB Yamaha ss 15 pitch prop buy or trade for knife

    Cord wrapped with name engraved are 180.00 with sheath. Wood are about 225.00 depending on what wood you choose. You can look at my [email protected]
  28. walkersoccer

    WTB Yamaha ss 15 pitch prop buy or trade for knife

    Are you I terested in a knife of just sell for cash? Or call me at 805 2101493
  29. walkersoccer

    For Sale Custom fillet and hunting knives

    bump. Interested in trade for Avet SX
  30. walkersoccer

    For Sale Custom fillet and hunting knives

    Starting new batch of fillet knives. You choose cord wrap or exotic wood handles. Choose your colors to match rod wraps and have your name or boat name engraved. Will take a month or two so order now. Tuna are coming! Also, interested in trade for 15" prop or lowrance /simrad outboard...
  31. walkersoccer

    WTB Yamaha ss 15 pitch prop buy or trade for knife

    Looking for a Yamaha 3 or 4 blade ss 14.5 x15 or 15x15 Will buy or trade for custom fillet knife. I make custom knives . Also looking for a lowrance/Simrad outboard auto pilot Roy 805 2101493
  32. walkersoccer

    Packs

    I second Mystery Ranch. I have the cabinet and hauled two elk out last season. By far the best system I have had. I have had cabelas frame, Badlands, Eberlestock dragonfly and just one. All worked but don't compare to Mystery Ranch. If you need a custom elk skinner, I make them. Instagram page...
  33. walkersoccer

    TRADE Handmade/Custom Filet knifes for Avet

    I have sold a lot of these to BD members and have a look at past forum posts. These are 440C steel heat treated by Bos. Come with leather sheath and your name or boat name engraved. I sell them for 200.00 ea I am looking for avet MX sized reels to trade Have a look at my Instagram @rwbladez...
  34. walkersoccer

    SOLD Raymarine X30 autopilot

    Is this still available?
  35. walkersoccer

    For Sale Three clean penn reels with rods ..cheap

    Price lowered. 50.00 ea or all three for 120.00
  36. walkersoccer

    For Sale Underwater camera/video screen

    FishTV 7 Used one time. Rechargeable Travel case Works and like new Has transducer, cable and comes with everything. 100.00 obo
  37. walkersoccer

    For Sale Three clean penn reels with rods ..cheap

    2 penn 500 jigmasters 1 penn surf master 200 All three reals come with 6.5' rod 20-40 Reels are very nice with no rust or pitting. Maybe only used a few times. Great loaners 60.00 each setup I'm in Moorpark 805 2101493
  38. walkersoccer

    SOLD Lowrance Link-5 VHF Radio $75

    Is this still available?
  39. walkersoccer

    For Sale Simrad go7 and go 5

    Do you still have a go7? If so could you call me at 805 2101493
  40. walkersoccer

    For Sale Custom fillet and hunting knives

    New cord wrapped offshore fillet knives. Based on requests and feedback from numerous tuna fisherman, I am now offering this cord wrapped fillet knife with leather sheath. I have used this on my boat and really like it. The cord gives an awesome grip and I treat it with scotch guard so...
  41. walkersoccer

    For Sale Custom fillet and hunting knives

    Here are some pictures for reference. The top is my elk skinner, my drop point design. Below is the bird and trout. I just shaped these yesterday.
  42. walkersoccer

    For Sale Custom fillet and hunting knives

    got it. yes, I can do that..actually, the bird and trout is probably exactly what you are describing..it is a small profile. kinda hard to tell but it is under an inch wide. I'll send some pics with a tape measure so you can see. be best to call me.
  43. walkersoccer

    For Sale Custom fillet and hunting knives

    Not sure what you mean by trimmer. That knife blade is as thin as I would go for a fixed blade game skinning knife. I could certainly thin the handle a little. For reference, that knife at the spine measures .10. My elk skinners are twice that at approx .22. My thinnest fillet knife is .06 and...
  44. walkersoccer

    For Sale Custom fillet and hunting knives

    Yes, I shape all my own blades. I mainly hunt deer and elk and have bonedout many, many elk. I prefer my skinner for large game as I specifically shape that for that task..I also use the blade above (bird and trout) for caping if someone wants a mount. That blade is perfect for working under the...
  45. walkersoccer

    For Sale Custom fillet and hunting knives

    Mike, Glad you liked it. FYI that is considered a "bird and trout" design of knife. I used cocobolo wood and 440c stainless. I was super stoked with this design and it's one of my favorites. Here are a couple pis of the knife. If anyone wants one like this, a fillet or elk skinner, hit me up.
  46. walkersoccer

    REPOWER of 2120 SC.

    I have the 150 hpdi and am happy..could always use more hp but with 450 hours and no issues,not gonna happen. If I were to repower I would seriously consider the new evinrudes.
  47. walkersoccer

    For Sale Custom fillet and hunting knives

    Ya, I remember that 120 mile day of nada. I was hoping we would all have some fish to clean. If you are talking about the 3rd picture of the Elk Skinner, Those are made with D2 steel and come with an awesome custom leather Sheath.. They are around 260.00-280 depending on what wood we decide on.
  48. walkersoccer

    For Sale Custom fillet and hunting knives

    yes a sheath comes with it. it will either be a black leather or black kydex..im leaning toward the leather..kydex collects grit inside and tends to scratch the blade..let me know if you want a large or medium and what color wrap. or call me and we will determine what would be best..Roy 8052101493
  49. walkersoccer

    For Sale Custom fillet and hunting knives

    Lol. I still have an old rapala fillet knife in my fly vest..was my grandpas and works just fine
  50. walkersoccer

    For Sale Custom fillet and hunting knives

    thanks.. yes, alot of knife makers use old saw blades for their fillet knife blades. they are kinda unique but not as solid as 440c or d2 with proper heat treat to the correct Rockwell hardness
  51. walkersoccer

    For Sale Custom fillet and hunting knives

    I just finished up a prototype fillet with a cord handle instead of exotic wood and a kydex instead of leather sheath. Some people prefer cord handles for a better grip over the wood. The idea is to offer whatever color cord matches your wraps or boat and keep the price less than the...
  52. walkersoccer

    For Sale Custom fillet and hunting knives

    Wow, thanks guys for the nice words..I am aware of custom knife prices and it's very hard to find a quality material, professional heat treated , nice sheath, custom knife for under 400.00. It's also tough to justify buying a custom 250.00 fillet knife when a 30.00 knife will work. I guess it's...
  53. walkersoccer

    Paddy Poaching - DP

    That was outstanding ! well done
  54. walkersoccer

    TRADE Trade custom, handmade fillet knife or knives for electronics

    Yes, I can do that. I would use D2 steal with full convex grind. Call me and we can dial in exactly what you want. Roy 805 2101493
  55. walkersoccer

    TRADE Trade custom, handmade fillet knife or knives for electronics

    thanks for the info, appreciated..yes, I am open to other vhf' s too
  56. walkersoccer

    For Sale Custom fillet and hunting knives

    The bottom knife is available. Call 805 2101493 if interested
  57. walkersoccer

    For Sale Custom fillet and hunting knives

    Have a matching fillet set for sale. One large and one smaller more flexible. Matching ironwood.. 425.00 for set and I will throw in a leather strop and Rwbladez shirt.. I have single fillets and elk skinners ready. Also, got my hands on some rare exotic cocobolo and bocote wood. You can pick...
  58. walkersoccer

    Same day report Dana point paddies 7/30

    hello, towed the boat down to Dana last night. Made bait at the red bouy right outside harbor and bought some nice sardines from a grumpy, pissed off dude at the barge. Logged 110 miles from 267, 209, 312 , 181 and back. Water was 74 and a little greener at 267 and thats where we saw some...
  59. walkersoccer

    7-27-18 Covered some ground

    X2. I'm towing down to Dana point to fish Monday..probablay concentrating on paddy fishing so any Intel would be greatly appreciated.
  60. walkersoccer

    For Sale Custom fillet and hunting knives

    Just go my gaff and bait net from Morita Custom Gaffs...Amazing!!!! He does an awesome job and put my logo as well as an American Flag on them. These are just so cool and unique I'm stoked to have them on my boat. We worked a deal so now I have his gaff and he has my knife... These are true...
  61. walkersoccer

    TRADE Trade custom, handmade fillet knife or knives for electronics

    I am a knife maker and have sold some fillet knives to BD members. There are threads on BD with information on my knives as well as Instagram @rwbladez. I need a simrad rs35 vhf that will tie into my simrad go7 chart plotter or something compatible. Also, I need a Simrad/Lowrance "outboard...
  62. walkersoccer

    For Sale Custom fillet and hunting knives

    I have a really nice one I just finished that is ready right now if you want it. Picture is on this thread. 805 2101493
  63. walkersoccer

    For Sale Custom fillet and hunting knives

    Both of these knives are now for sale. The smaller of the two in my new medium fillet knife. It is thinner with more flex but will handle anything. I'm pretty happy with it and have several more in the works. The larger one was for a customer that wanted the two tone ironwood but wanted the...
  64. walkersoccer

    For Sale Custom fillet and hunting knives

    New Lightweight, two sided leather sharpening strop. 7.5"X1.5" with leather on both sides. Super light and great for hunting pack or boat. You could put polishing compound one one side (I use green compound on one side). This is all you need to keep knives sharp in the field and it's quieter...
  65. walkersoccer

    For Sale Custom fillet and hunting knives

    Thanks Mike I really appreciate the kind words. I just had some shirts made and would like to send you one. I have large and xl. Thanks
  66. walkersoccer

    For Sale Custom fillet and hunting knives

    Thanks Daryl . Can't wait to get your gaff...
  67. walkersoccer

    For Sale Custom fillet and hunting knives

    i make custom knives and have sold several to BD members over the past few months. The fillet knives are available in a large, stout blade with minimal flex. They work very well on large fish and I have used it with great results on bass and halibut as well. I also offer a smaller fillet with...
  68. walkersoccer

    New Electronics for my 2530

    Awesome! That looks great.
  69. walkersoccer

    Channel Islands 6/5

    Thanks for the info on the halibut..yes, I heard the hookup baits were the ticket
  70. walkersoccer

    Channel Islands 6/5

    I was always under the impression that halibut were cut into four fillets with all the skin on. So, if they want 2" to be connected on the fillets, how are the party boats doin it? All I can think of is cutting all four of the fillets to the tail and hacking the whole tail off leaving the tail...
  71. walkersoccer

    Channel Islands 6/5

    Thanks. What new fillet rules are you talking about? I'm sure I did it totally right but just in case someone else is wondering?
  72. walkersoccer

    Channel Islands 6/5

    Ran out to Santa Cruz with the rest of the fleet and tried for wsb. Saw lots of bait and fish on the meter but couldn't get any to go. Saw a few coming over the rails on other boats just not mine. Met a nice couple on a Davis that gave me a few red swim baits to try...thanks! Crossing the...
  73. walkersoccer

    For Sale Simrad RS35 VHF Radio - $100

    If you still have it, I'll take it
  74. walkersoccer

    For Sale Custom made knives with name or Boat name

    Here is a large fillet with the boat name inscribed. BD member Mike just received his large fillet . His is the first to the BD Community.
  75. walkersoccer

    FREE Trailer rollers free

    sorry but there were given to another BD member
  76. walkersoccer

    For Sale Custom made knives with name or Boat name

    Also, just started on 2 ElkSkinners made from thick D2 steel. Handles will be made from ironwood in the picture. Let me know if interested.
  77. walkersoccer

    For Sale Custom made knives with name or Boat name

    Have 5 more large fillet knives coming back from heat treat soon. Should be ready in a few weeks. Let me know if interested. Also, have a new Facebook and Instagram account,@Rwbladez Roy
  78. walkersoccer

    FREE Trailer rollers free

    I still have the rollers.
  79. walkersoccer

    2005 2120

    Thank you sir
  80. walkersoccer

    For Sale Custom made hunting and fillet knives

    Thanks. Here is a better picture of the skinner. If you hunt big game, this knife is the shit!
  81. walkersoccer

    2005 2120

    Nice and congrats. That tackle station is an awesome idea. What kind and model is the box? I wanna do the same on mine. Also, what size prop?
  82. walkersoccer

    For Sale Custom made knives with name or Boat name

    I have only used natural wood of various types for my handles. Never worked with bone. Damascus is beautiful steel but super expensive. I would be interested in trying though. Gimme a call if you want. 805 2101493 There are so many possibilities and materials to work with. I've just focused on...
  83. walkersoccer

    For Sale Custom made knives with name or Boat name

    Yes, large fillet knive blades are about 9" overall about 14 to 15". I grind everything freehand so no two are exactly alike. They are really pretty but not intended to be safe queens. They are designed to be used hard.. I used my skinner last year to cut through an elk spine. Grabbed a rock...
  84. walkersoccer

    For Sale Custom made knives with name or Boat name

    mike, I have a few large fillet knifes ready and.can send you one. I haven't started making any small filet yet but i will order some new steel and get started. I will call you today
  85. walkersoccer

    New to me Parker

    Really nice! Congrats on you addition to the family....and the boat.
  86. walkersoccer

    For Sale Custom made hunting and fillet knives

    ,I make custom knives and wanted to offer them to BD. It started as a hobby and over 10 years I developed an elk hunting skinner that is awesome. From there I made a tactical knife and recently started on fillet knives. The Elk Skinner and Tactical are very substantial 1/4" D2 Tool steel. I...
  87. walkersoccer

    For Sale Custom made knives with name or Boat name

    I make custom knives and wanted to offer them to BD. It started as a hobby and over 10 years I developed an elk hunting skinner that is awesome. From there I made a tactical knife and recently started on fillet knives. The Elk Skinner and Tactical are very substantial 1/4" D2 Tool steel. I...
  88. walkersoccer

    FREE Trailer rollers free

    I'm around today if anyone wants to swing by. Roy 805 2101493
  89. walkersoccer

    FREE Trailer rollers free

    In Moorpark. Ventura county
  90. walkersoccer

    FREE Trailer rollers free

    if anyone is in need of rollers let me know. I converted to bunks.
  91. walkersoccer

    For Sale Simrad RS35 VHF Radio - $100

    I sent you a PM about a possible trade a week ago. Just wanted to make sure you got it and I sent it correctly
  92. walkersoccer

    For Sale Yamaha 8hp high thrust

    I will be in San Diego next week and am interested if you still have it. Gimme a call Roy 805 2101493
  93. walkersoccer

    2120 baittank install

    I have the same boat with the same tank. I installed tt myself and bought everything at west marine. Was pretty easy. I'm in Moorpark if you want to swing by and look at it. Roy
  94. walkersoccer

    SOLD Yamahaha 9.9

    Would you mind calling me at 805 2101493 or leave your number and I will call you. Thanks
  95. walkersoccer

    SOLD Yamahaha 9.9

    I have a Parker 2120 similar to you defiance and thinking of adding the same setup for slow trolling. Wondering why you are selling? Didn't like or use it? Thanks
  96. walkersoccer

    WTB- Yamaha 15P Prop

    3 or 4 blade? Good condition? How much and if you are in sd do you ever get up north? I am near Simi Valley. Thanks, Roy 805 2101493
  97. walkersoccer

    Parker seat,deck chairs, garmin gps, transducers,anchor

    I still have the Bimini. Feel free to call at 805 2101493
  98. walkersoccer

    WTB- Yamaha 15P Prop

    X Do you still have a 14.25 x15 stainless prop?
  99. walkersoccer

    WTB Bimini top for a parker 1801

    I have a Bimini that came with my 2120. Don't know if it would fit. Would sell cheap 8052101493
  100. walkersoccer

    Simrad go7 help

    Raise the ducer up a bit and getting reading up to about 12 mph. Still need to fine tune to try for a reading on plane. I have another ff with a thru hull that reads well at speed so not a huge concern. Does yours read well at speed?
  101. walkersoccer

    2012 Davis Rock Harbor 25 Short Cabin SOLD

    That is an awesome boat. Anyone know where to get that removable table?
  102. walkersoccer

    Parker seat,deck chairs, garmin gps, transducers,anchor

    everything but the transducers and Parker bimini have sold
  103. walkersoccer

    Garmin 541 color gps

    Are you able to pick it up?
  104. walkersoccer

    Garmin 541 color gps

    The p66 is a 10 pin that came off a furuno ff
  105. walkersoccer

    Garmin 541 color gps

    I will take 100.00 for the garmin gps
  106. walkersoccer

    Parker seat,deck chairs, garmin gps, transducers,anchor

    how bout 75.00 for both deck chairs?
  107. walkersoccer

    Garmin 541 color gps

    works great and has everything to hook up. Also, have airmar p66 transducer and lowrance transom transducer like new. Make offer 805 2101493
  108. walkersoccer

    Parker seat,deck chairs, garmin gps, transducers,anchor

    I also have a Bimini top for a parker 2120
  109. walkersoccer

    Parker seat,deck chairs, garmin gps, transducers,anchor

    Todd seat off a parker good condition 2deck chairs fair condition Anchor Garmin 541 with cables. Good condition Lowrance transom transducer like new. Airmar transom mount p66 with furuno plug Boat cover very nice. Supposedly fit my parker 2120 before radar arch went on. Doesn't fit now...
  110. walkersoccer

    2004 TOHATSU 9.8 LONG SHAFT 4 STROKE ELEC START

    Do you still have the motor? I saw it on Craigslist. I am in Ventura county and have a lot of boat/fishing/hunting stuff. Gimme a call 805 2101493
  111. walkersoccer

    3/4 Day Family Trip

    Great report and great pictures. Well done sir!
  112. walkersoccer

    Sons first dorado..and then some

    first and foremost, thanks to all the bd'rs that responded to my request for Intel. We left Ventura county last night and arrived in Oceanside around 0100 today. Took a nap and headed out at 0500. Got a good scoop of small to medium deans. Based on some of your information, we headed south...
  113. walkersoccer

    Oceanside with son for dorado tomorrow. Intel?

    Same area? We are coming down from Ventura and normally fish the Channel Islands so I'm just going off what I read on here.
  114. walkersoccer

    Oside 8-3 and 8-4

    Thanks for the report. Awesome day! I am heading down to Oceanside tonight to try to do the same. My boy has not caught a dorado yet. We shall see
  115. walkersoccer

    Oceanside with son for dorado tomorrow. Intel?

    driving down tonight after work to Oceanside with my son. Plan is to stay 5-10 miles out and head south looking for paddies. Could do 209 or other banks as well. Son has never caught a dorado. Any info or buddy boat would be great. Thanks, Roy
  116. walkersoccer

    SIMRAD Auto Pilot System

    Would this system work with a single Yamaha outboard? My new Simrad go7 is autopilot compatible. Would this work?
  117. walkersoccer

    Simrad go7 help

    I spoke with Simrad a couple of times and was able to figure some of it out. For structure scan I needed to go to the view and switch it to down. I think this will work I was able to get the mlpa boundaries by switching what the chart was reading. This was a long process but finally got it...
  118. walkersoccer

    Simrad go7 help

    first trip today and some issues. -loaded from factory with insight map. Doesn't seem to have mpla boundaries. -have the totalscan transducer but won't structure scan. Also looses bottom over 7 mph. May need to raise. -asks for password to connect iPad to gofree but don't have a password. I...
  119. walkersoccer

    Wtb Yamaha 3 blade 14 1/4x 15 prop

    No, to big but thanks Roy
  120. walkersoccer

    Smith SS Rod Holders

    Thanks but to wide for my bt. Maybe interested in the 2 perkos. I'll let you know
  121. walkersoccer

    Smith SS Rod Holders

    What is the size of the 4 rod holder.? Wondering if it will fit across my bait tank
  122. walkersoccer

    Wtb Yamaha 3 blade 14 1/4x 15 prop

    looking for a 14 or 14 1/4 x 15 pro to buy. 3 blade stainless
  123. walkersoccer

    Parker 2120 150 hpdi prop questions

    Thanks so much for the response. I do have a prop guy ive worked with and will continue working with him. I have been running the boat for the past two years and am relatively happy with the performance. Just trying to get it dialed in just right. When we went on the motor computer, it showed...
  124. walkersoccer

    Parker 2120 150 hpdi prop questions

    Anyone have this combo? Looking for some info on wot and performance. Also, what hole its mounted in. Been through a couple props and not satisfied yet. Motor is mounted 2nd hole and currently has 4 blade aluminum 14.5x15. Wot downhill, med load is 5100 @32 mph. Last prop was stainless 3 blade...
  125. walkersoccer

    Parker 2120 Fully Loaded 2003 44000.00

    Did you sell the farallon? I have a 2120 and am looking to move up in size
  126. walkersoccer

    anybody want to fish either 7-20 or 7-21

    Heading down we'd evening to fish Thursday in my 2120 parker. First time down there for tuna in my boat. Can't decide on Oceanside or Dana. Depends on where it is easiest to make or buy maks. Would love to buddy boat. Probably sleep in the lot or rent a slip and sleep in the boat. Thoughts?
  127. walkersoccer

    Any info on capa or cruz yellows ?

    Thanks to all that provided some Intel. Got on the yt west end of capa. Even got my wife her first. All fly lined sardines. Wouldn't eat iron for us. Beautiful day on the water for the fam. Also, lots of toad calicos. All but 2 released along with the smaller yellows. Bite turned off when a...
  128. walkersoccer

    Any info on capa or cruz yellows ?

    Yes please. Please send me all you best secret spots. That's exactly what I'm looking for. I'll be standing by
  129. walkersoccer

    Any info on capa or cruz yellows ?

    taking my wife and son out Friday. Looks like capa has been kicking out a lot of yellows. Plan to get bait, try to make maks and I have fresh dead squid. Also planning to troll some rapalas. Would love to get her,first yellow. Any info would help.
  130. walkersoccer

    Anacapa Island Yellowtail and Calico Bass

    Very nice. Taking my wife out Friday on our boat. hope to get her first yt. I have fresh dead squid, what part of the island were you. Any Intel would be appreciated.
  131. walkersoccer

    Capa and cruz 6/3

    got live squid in CI . Went to arch at first light with everyone else. Current was weird and we didn't get bit there. Headed to Cruz and hit Chinese first for a 20lb halibut. Went to smugs and yellow banks and picked up 2 wsb and one smal yt. Fish were in 50-60 and water temp was 60-61...
  132. walkersoccer

    Anacapa

    Same situation for me yesterday out there. Squid boat was right in front of the harbor but a huge line of private boaters waiting. We skipped waiting for the live and headed out with fresh dead. Current was ripping and it was already a zoo at the arch. Watched a few hookups but nothing for us on...
  133. walkersoccer

    Anacapa

    Same situation for me yesterday out there. Squid boat was right in front of the harbor but a huge line of private boaters waiting. We skipped waiting for the live and headed out with fresh dead. Current was ripping and it was already a zoo at the arch. Watched a few hookups but nothing for us on...
  134. walkersoccer

    Santa Cruz same day report

    I don't know. We ran out of Ventura harbor to Santa Cruz island. That is approx. 20 miles
  135. walkersoccer

    Santa Cruz same day report

    I may be able to do Friday..let's see how it goes
  136. walkersoccer

    Santa Cruz same day report

    Here's a picture. First halibut on my boat..stoked!
  137. walkersoccer

    Santa Cruz same day report

    Hooked up with two other boats I met on this forum and headed out to cruz. Fished Chinese harbor area. Got 1 nice halibut 39". Caught in 80 feet and water was 60-61 degrees. Caught on a sardine. Kept drifting for halibut but only a few sharks. Went in shallower and killed the calicos on...
  138. walkersoccer

    Santa Cruz 3/26

    I saw you by the bait docks as I was coming in. One of your kids was landing a tom cod. Glad they had fun. Nice boat. Thanks for the reply and see you out there soon.
  139. walkersoccer

    Santa Cruz 3/26

    Finally got out. Left CI about 7am with my boy. No bait and couldn't find any macs. I was expecting it to be a bit rough and the ride over was unpleasant 13-15 mph. Fished from the point to yellow banks in 90-140 feet for some small rockfish and whitefish on jigs. Only got about 10 fish and had...
  140. walkersoccer

    County line today

    You too.mhow did anacapa go for you?
  141. walkersoccer

    County line today

    Have not seen much posted lately so thought I would give my update. My son and I finally got out and headed down the coast from Oxnard. No bait in the harbor but plenty of macs along the coast. Also, tons of red crab. Water was 59 degrees and saw several whales. Caught a few calico on live macs...
  142. walkersoccer

    Heading out of Dana on Monday. First time in new parker 2120 with son..info needed

    Sorry I didn't report back sooner. I saw that someone was upset that I asked for information but never said thanks or reported back.. So, thanks for all your help everyone and this is the report.... We didn't go because my son fractured his back and now has to wear a back brace for 5 months...
  143. walkersoccer

    Dana Point Decent Grade Tuna 11/19

    What would you suggest? 23 miles is doable but if there is something closer, I would love to try that first. My Boy sometimes gets sick unless we start fishing.
  144. walkersoccer

    Dana Point Decent Grade Tuna 11/19

    Sir, Heading down to Dana tomorrow with my son from up North (Ventura). How far is the 209 from the Harbor? never been down south and son has never caught a tuna. Roy
  145. walkersoccer

    Heading out of Dana on Monday. First time in new parker 2120 with son..info needed

    Thanks for the reply. I was under the impression that the fish were within 10 miles or so of Dana Harbor. Is that wrong? How far is the North Nine,209 or 182 from Dana?
  146. walkersoccer

    Heading out of Dana on Monday. First time in new parker 2120 with son..info needed

    im from Ventura and have had my new to me parker 2120 for 2 months. Missed all the tuna action this season so seriously considering heading down to launch from Dana harbor on Monday. I will be with my boy and he has never caught a tuna. Never been out of Dana and don't know the areas at all...
  147. walkersoccer

    10/6 Same Day Report, Marlin Mission

    Went to county on Monday for first real fishing trip on new boat. Water was 67 and got on nice yt and one broke off. Some calico and sandbass before the Bonita came in. Everything on sardines, they wouldn't eat the macs. Decided to head offshore and found birds and dolphin about 6 miles off...
  148. walkersoccer

    Lobster

    Tried last night but it was our first time. Guys have been getting limits but seals stole our bait bags and we left at 815.. Last trap pulled had 6 with one close to legal..if we stayed an hour or two probably would have done well as they were just starting to crawl about 730.. We started...
  149. walkersoccer

    Lobster

    anyone get out of Channel Islands for the lobster opener last night? Planning to get out during the week. Will be my first hoop netting for lobster trip.
  150. walkersoccer

    Anyone have a yamaha hpdi

    Update..called Gonzalo and he said to replace the silver hp filter above vst tank. Bought that expensive filter and pulled the old one. Couldn't even blow through it. Put the new one on and went out of Channel Islands. got it up to 4900 rpm @ 33 mph without trimming it up. That was topped out...
  151. walkersoccer

    Heading out of CI tomorrow

    Not sure of prop size..it is a 3 blade but doesn't say the size..being that the rpm's have dropped a bit and the rpm's drop about 100 when I go to wot I'm assuming that's not the issue..
  152. walkersoccer

    Anyone have a yamaha hpdi

    3rd trip after getting it from east coast..cant get wot. Today was limited to 4100rpm. Runs like a top otherwise. Replaced vst and exterior filter and plugs yesterday. Same issue..also, temp alarm went off at slow troll. Idled up and it went.off..water coming out was cold..new impeller...
  153. walkersoccer

    Heading out of CI tomorrow

    Thanks for all the replies. Really appreciated.. Well, made bait at the harbor. Headed out to Gina and saw a few party boats and privates out there..some good marks so anchored for a bit. Nobody seemed to be getting bit. A few huge sandbass and small Bonita but no yt. My wife and daughter...
  154. walkersoccer

    Heading out of CI tomorrow

    Hey, Heading out of CI tomorrow. This time with the wife and kids. First time out for the wife. Went out to Capa last week with the kids for first trip on the new to me boat. Didn't find anything other than a bonita on the troll. Looking to put some fish on the boat even if its bass or...
  155. walkersoccer

    First trip out tomorrow with kids-suggestions?

    Not so well..first trip with son and daughter..still learning the boat and don't know the spots to well yet..made macs no problem at breakwater. Flipped a coin between deep hole and capa, capa won. Didn't hear any radio traffic but expected to find the fleet behind capa. Rounded east side and...
  156. walkersoccer

    First trip out tomorrow with kids-suggestions?

    Thanks for the advice..gonna give it a go tomorrow. Went to county a few weeks ago and did well on the yt. Just got back from an elk trip and trying to relocate the fish. Appreciate the info. Will try for macs at the breakwall and head over to capa.
  157. walkersoccer

    First trip out tomorrow with kids-suggestions?

    Heading out of CI with kids tomorrow for first trip on new boat. Any suggestions on making macs? Heard inside the harbor? Suggestions on capa or county line? Have some feathers and rapalas if bait can't be found. Any help would be appreciated..
  158. walkersoccer

    Parker 2120

    Thanks for the info. I think it is 25 feet of chain. Also, I am aware of the filters issue with the hpdi. I'm assuming you have the same motor? Previous owner has added ring free and start on as well as pennzoil synthetic blend religiously. He stated filters have never been a problem for him and...
  159. walkersoccer

    Parker 2120

    i posted here several months ago when I was looking for my boat and the events (trailer nightmares) that ended in me getting from back east to SoCal a couple weeks ago. After rebuilding the entire trailer, I was finally able to check out the boat. Very happy with it. 03 2120 with yam150 hpdi...
  160. walkersoccer

    Parker 2120 wanted

    Thats a beautiful tank. It's twice the size mine will be. Did you get the rod holders installed by randy? Do they screw into the tank? Do you have a lid/bait/ filet board for the top?
  161. walkersoccer

    Parker 2120 wanted

    No, still has the rollers for now..might be on my to do list.. It's a long list.
  162. walkersoccer

    Parker 2120 wanted

    That looks great. What size boat and.tank is that ?
  163. walkersoccer

    Parker 2120 wanted

    Btw. Randy is making my tank. Should be done tomorrow....
  164. walkersoccer

    Parker 2120 wanted

    So yesterday afternoon I picked up a few buddies that have parkers and we launched my new to me 2120 out of Oxnard. The idea was to just run it a few miles and get me familiar with the boat and electronics. Well, one of them made a phone call and the next thing we are heading down the coast. We...
  165. walkersoccer

    Parker 2120 wanted

    Thanks for all the info. I finally got the trailer rebuilt and back together. Taking it out in a few hours to get familiar and make sure all is well. Friend of mine that has a Parker is going with me. I will post the results.. Can't wait to get the bt so I can start fishing..
  166. walkersoccer

    Parker 2120 wanted

    That looks like a nice boat and I spoke with the owner. Seems like a real nice guy. Out of my price range. I bought one from the east coast and it is now here. Working on trailer nightmares but almost done and hoping to get it out next week.
  167. walkersoccer

    Parker 2120 wanted

    Would be awesome if it it was my garage. It will stay on the side of my house. I will post pics when I get it all dialed in.
  168. walkersoccer

    Parker 2120 wanted

    Finally received my new Parker 2120 from east coast. Boat looks awesome with 340 hrs on the 150 hpdi. Trailer is screwed and in need of rebuild.mreplacing everything on it now. Hopefully get it in the water for maiden voyage next week. I have offshore making me a tank now so that is the next...
  169. walkersoccer

    Parker 2120 wanted

    Bought a 2120 from Delaware. I paid to have the boat and motor checked out. However, didn't have anyone pull the wheels on he trailer. Make sure you have that done. I will Waite till I get it and check it all out before I comment on the seller or shipper. Man, it's hard to take the leap and...
  170. walkersoccer

    Parker 2120 wanted

    Thanks for the info on the boats. After looking for a while, my new 2120 is almost home. Should be in California in a few hours. Unfortunately trailer had major issues with rusted bearings and a blow out and broken leaf spring along the way..set me back some more cash. I will post more info as...
  171. walkersoccer

    WTB a 4 - 9 HP outboard

    I need a long shaft. If you have on call me 805 2101493
  172. walkersoccer

    WTB a 4 - 9 HP outboard

    Did you sell the motor and bracket?
  173. walkersoccer

    FS pacific edge 36 gallon oval

    I will buy it and pick it up tomorrow if still available. Roy 805 2101493
  174. walkersoccer

    FS pacific edge 36 gallon oval

    If it falls through I'm interested!
  175. walkersoccer

    WTB a 4 - 9 HP outboard

    Sounds good. Where are you located
  176. walkersoccer

    WTB a 4 - 9 HP outboard

    If you still have it could you send some pictures. Looking for a kicker and bracket.
  177. walkersoccer

    Parker 2120 wanted

    Thanks but it is a bit to much for me right now..nice boat though and good luck selling it.
  178. walkersoccer

    Parker 2120 wanted

    Was hoping someone might have one here but am probably gonna get one there.If it checks out. Anyone here have a 2120?
  179. walkersoccer

    Parker 2120 wanted

    still looking for a 2120 in California. I'm getting ready to pull the trigger on one on the east coast. Would prefer to buy one here if possible..looking in the under 30k range Thanks
  180. walkersoccer

    2001 crestliner 14 angler

    i had a guy come out and look at it. loved it and then told me he is new to california and wants to use it to fish the channel Islands with his wife...i talked him out of my boat....bad idea. he is now looking for a larger boat.
  181. walkersoccer

    2001 crestliner 14 angler

    bump..you can contact me at 805 210-1493
  182. walkersoccer

    2001 crestliner 14 angler

    vey nice, and loaded for trolling. yamaha 4-stroke 25 hp, 2 downriggers, minn kota foot control trolling motor, live bait well, electric anchor, fishfinder,8 rod holders unused full canvas/clear enclosure. all new and all snaps and zippers are perfect. as far as i know, never in salt. i have...