Finding the Perfect Surf Fishing Rod and Reel

Over the years we’ve had some great on-the-beach surf fishing seminars and have seen thousands of different rod and reel combinations make their way to the sand.  Some have been right on the money and others, well let’s just say were a bit lacking. 

When it comes to surf fishing there are two basic surf fishing setups.  Long rods with heavy line used for casting and fishing outside the surf line.  And light-line surf rods designed so surf fishermen can easily move along the beach and fish the inshore troughs, holes and rip currents.   

Long rod surf fishing has been around for decades and many surf fishermen (including myself) started this way with twelve to fourteen foot Calcutta rods and Penn “Jigmaster” reels loaded with thirty-pound mono.  Although these rods were overkill for fishing perch and corbina, they were essential equipment for fishing big sharks after dark. 

In the 1970’s, my buddies and I started fooling around with lighter equipment and fishing much closer to shore.  Although we still fished the sharks at night with heavy gear, the lighter gear seemed to help us catch more fish and have a lot more fun during the day.  Since then, light-line surf fishing has become immensely popular as folks have figured out how much fun it is to catch fish on light tackle. 

RODS

So let’s take a look at what characteristics make for a good rod and reel for light-line surf fishing.  First, let’s start with picking the perfect rod for the surf.  There are four things I look for in a surf rod: weight, action, balance and sensitivity. 

Action

Rods come in three basic actions: fast action, medium action and parabolic or slow action.  A fast action rod has a very short taper near the tip (it’s very stiff) and is best suited for tuna or large game fishing.   

A medium action rod bends from the middle up and is useful for heavier surf fishing and fishing from the rocks.  A parabolic action rod has a tremendous amount of bend (all the way to the reel seat) and is very limber.   

So for light-line fishing, I prefer to use three setups on the beach.  A medium-action seven to nine foot spinning rod, a parabolic seven to nine foot spinning rod and a seven to nine foot conventional casting rod.  For fishing bait and grubs I prefer the spinning outfits and for lures I employ a casting rod with a baitcasting reel. 

Weight

The second item that is essential to a good surf rod is its weight—or lack of weight.  Unlike with long rod fishing, you’ll need something light so you can walk the beach and search for promising conditions.  A lightweight rod is essential.  Rod weight can vary based on the materials used to build the rod.  I prefer to use rods made with a graphite blank, cork grip and an ultra-light plastic reel seat.  A nine-foot rod made with these components can weigh as little as six ounces which means less weight to carry and a lower amount of fisherman fatigue—especially after dozens of casts. 

Balance

The third component of a great surf rod is finding one designed so the rod balances over the reel.  That is, when holding the rod, the tip and the butt are at the same level when your hand is gripping where the reel meets the rod.  By having your rod balance over the reel seat, it reduces the amount of stress and weight of the outfit and works in conjunction with a lightweight rod to reduce fisherman fatigue and improve castability. 

By having your rod balance over the reel seat, it reduces the amount of stress and weight of the outfit to reduce fatigue and improve castability.

The final and most important characteristic of the perfect surf rod would be its level of sensitivity.  When using graphite blanks, you pick up a much greater amount of sensitivity not afforded to rods made exclusively of fiberglass.  Although graphite is in no way close to the strength of fiberglass, graphite is ultra-lightweight and has a sensitivity that is unmatched by any other material.  Being able to feel every bite, every type of bottom and even the size of your catch during the fight gives you a clear advantage over fiberglass or other woven rod blank materials. 

Length

Now that we know how our rod should be built, what about size and length as determined by the kind of surf fishing we do?  I generally break light-line surf fishing down into four categories: Open beach, sight fishing, lure fishing and fishing from the rocks. 

When it comes to open beach fishing, I’m generally walking the beach and casting offshore to find fish in the offshore trough or in the nearshore holes.  This would be about eighty percent of the time and in these cases I would employ a nine-foot spin rod with a very limber tip.  As rods are rated by line class and lure weight, this nine-foot rod would have a line rating of four through twelve-pound test and a recommended lure weight of no more than 5/8 ounces.  Using a parabolic rod will allow you to cast long or short distances with extreme accuracy—which is essential when you are trying to drop your bait near a submerged rock or in a small offshore hole. 

During the summer months when corbina swim in just inches of water, I like to use a much shorter seven-foot spin rod to sight fish.  When sight fishing, you’ll find corbina swimming very close to shore and a short accurate cast of ten feet or less is essential.  With a longer rod this is extremely difficult.  A shorter rod gives you the ability to aim and land your bait in a confined area at a short distance. 

When it comes to fishing from the rocks, I prefer to use a stiffer and longer rod.  Big fish come from between rocks and the certainty of landing one with a parabolic rod is extremely questionable.  In this case, I prefer a nine-foot medium action spin rod.  Look for one that is rated eight though eighteen-pound test with a lure weight capacity of about one ounce.  Longer, stiffer rods used from the rocks will allow you to direct fighting fish away from the rocks and help you with landing the fish once it makes it to the rock jetty’s edge.  One last benefit of the longer rod is the fact that it will be much easier for you to “un snag” your rig when it inevitably gets wedged between the rocks. 

Lure Rod

Unlike bait fishing, when I’m fishing with lures (especially for halibut) a conventional bait casting setup is easy and fun to use.  The motion of casting a conventional rod also reduces fatigue and allows you to make more casts during the day. With a little bit of practice, casting reels are easy to use and will produce long accurate results. 

Casting rods should be medium-heavy and between seven and nine feet in length.  Line and lure ratings should be ten to twenty pound monofilament with a lure rating up to 1 ½ ounces.  Rods should balance (with the reel installed) right over the reel seat. 

Casting rods should be medium-heavy and between seven and nine feet in length.

It is important to remember you will be casting thousands of times with spoons, hardbaits and other lures.  This means that with a lighter and better balanced rod, you will experience less fatigue and be able to make more casts throughout the day.  

Recommendations

When it comes to purchasing spinning and conventional rods for the surf, Shimano, Phoenix, Edge rods and Penn offer several great models.  My current favorite being Edge, they were founded by the legendary rod manufacturer Gary Loomis and is a factory direct business model that focuses on lightweight and sensitive high performance rods.

REELS

Spinning and bait casting reels vary by price and size so here are a few tips when trying to match your rod with the perfect reel: 

When choosing a spinning reel for bait and grub fishing keep this rule in mind: The sky is the limit when it comes to the price of a rod but when buying a reel don’t break the bank.   

Modern surf rods are built to stand up to the harshest environments and when taken care of, they will last for decades.  Spinning reels on the other hand just need one splash of sandy salt water, one drop in the sand, one very windy day and they will seize up like your parents did when they saw your high school report card. 

Recommendations

Look for a spinning reel in the 2000 to 3000 size.  Shimano, Daiwa, and Penn make some excellent reels in the $35 – $100 range.  Shimano’s Sedona and Sienna are great examples, but I’d also look at Penn’s new Battle III 2500 spinning reel.  Penn has been working for years to perfect saltwater reels used by fishermen in the Northeast who think nothing about wading out into ice cold sand filled water to fish.  The Battle III offers stainless steel and anti-reverse bearings that are shielded for improved corrosion resistance—essential to keeping sand out of your sensitive bearings, which is perfect for the beach. 

When looking for a casting reel, check out Shimano’s Tranx 200 and Penn’s Fathom 200.  Both are great casting reels and specifically designed for saltwater and sand applications.  Both reels are low profile, and you can load them with 6 or 8 lb mono or 20 – 30 lb braid.  They are available in high gear ratios which make them ideal for fishing artificials such as jerk baits that require significant movement and control.  

When it comes to purchasing a rod and reel for the surf, keep these recommendations in mind. With the right rod and reel for the job at hand, you will both catch more fish and have much more fun doing it!