Results 1 to 4 of 4
Thread: Wash down pumps
Sep-03-2012, 11:49 AM #1
Wash down pumps
I need to install a wash down pump on the boat I just bought.
Looking at the shurflow extreme pro blaster or a jacob
Any preferences also can I use the live well intakthanks in advance
Sep-03-2012, 12:20 PM #2
Shurflow gets my vote.
I've owned both Jabsco & Shurflow pumps, and have a Jabsco thats not working right now in my current boat (was in there when purchased). The Jabsco are good pumps, but my personal preference is Shurflows....... they get the nod from me.... mine will be getting replaced with a Shurflow in due time.
The unknown fisherman
Sep-03-2012, 06:17 PM #3
If you can find one with threaded hose connectors, rather than the O-ring fitting, you'll be better off. Those O-ring ones tend to leak and that's no bueno!
Sep-03-2012, 09:22 PM #4workin' foo
- Join Date
yea you can use same intake as the bait. You should post a pick to show folks what you are wotking with, but you should be able to install a tee- for BP on one side and WD on other. Both should thread in. Long as it's balanced and secured. Don't want more leverage from pounding on one side to weaken the bronze though hull at the base. If it breaks below the shut off valve- that blows big time!!! Keep all hosses away from the top of any manual float switches. If any should loosen or break- you don't want them landing/resting on the f-switch
If you are a boat us member- check their site maybe for proper way to rig WD with the BP
By ?? fisherman in forum Fishing Chit ChatReplies: 15Last Post: Aug-23-2012, 10:33 PM