Results 1 to 10 of 13
Thread: Need rod selecting advice
Apr-09-2012, 05:04 PM #1Skipper
- Join Date
- Yuma, AZ
Need rod selecting advice
I ordered an Okuma Special Edition MK-30II SE as a lighter cow reel and having it spooled with 135# JB hollow with enough room left for 25 yd. loop to loop leader.
Now comes the question of which rod to pair it up with. I am thinking I do not want a roller rod but I would like people’s opinions on what rod to get.
Apr-09-2012, 05:16 PM #2
Apr-09-2012, 05:34 PM #3
x2There's a fine line between fishing and just standing on the shore like an idiot. ~Steven Wright
Apr-09-2012, 05:49 PM #4
Lighter than what? Two by Four, 770XXH or XXXH. I had a nicer (heavier) fish hanging in January on a 770XXH and the rod was bent pretty good. If you can get to a tackle shop, have a look at the new Rail Boss from SeekerSteve K - Longer Rods, Longer Boats, Longer Trips
Apr-09-2012, 06:34 PM #5
Ring guide 2x4 with a salty dawg foregrip would get you anywhere you need to go and back. I like they way that rod shuts off compared to a calstar 770 model but thats just me.
Go pull on a few....they all have plenty of balls so it comes down to what feels good to ya or as my daddy used to say........ "pick one and dance with the gal that brung ya""Jimal"
" Hook em and Cook em...........Death from Above."
Apr-09-2012, 06:41 PM #6
if you are fishing 100#.... try a ringed Phenix 700 3xh ...
if you are fishing 130#....either a ringed guide 2x4 or a SS6463xxxh.
and a Rail Dawg fore grip if it is a rail rod they are just the best rail grip.
You need to go pull on some and decide for yourself....
Apr-09-2012, 07:17 PM #7
First, you have to decide if you plan to fish the rail or from a harness. That will cut your choices in half. Being a harness guy, I would go with a 760H or 760XH.
Apr-09-2012, 07:23 PM #8tunaholic
- Join Date
- Chino Hills, Ca.
I will throw in my hat sir...
I would like a Calstar Graphiter 770XXXH with PacBay Titanium Turbos and a roller tip top. The handle made with one 11" cold shrink on the aft grip between the reel seat and the gimbal metal. 2 wraps of cork tape on the fore grip with a 18" cold shrink on top of that. 5 strand turk's head on the top of the cold shrink for a winding check and a 5 strand turk's head on the gimbal/aft grip for the deckhands grip on the bow.
Plain Jane solid color please...
P. S. if the fore grip ever wears out, just replace...
Apr-09-2012, 07:34 PM #9
I remember talking rail rods with Brandon at the L.B. Fed a few years ago. He was of the opinion that both the 770XXH and XXXH rods were a little "spongy" at the tip. But, I'm about to begin wrapping two more of the XXXH blanks into rail rods for a friend. he plans on fishing them with his ATD30T reels. Twins.Steve K - Longer Rods, Longer Boats, Longer Trips
Apr-10-2012, 06:23 AM #10
I have that reel. I have a 2x4 on it. Just picked up the new 30 SEa at the show a few weeks ago. Here is the rod I will match the reel up to.
Candy apple Knucklehead - BD Outdoors Caught a 267 on the 30 SE last year with a 2x4 on it.
By bob1825 in forum San Diego Long Range FishingReplies: 10Last Post: Aug-06-2010, 01:45 AM
By redheadedsailor in forum Fishing Chit ChatReplies: 0Last Post: May-25-2010, 10:59 PM
By frenchy in forum Avet Reels SupportReplies: 7Last Post: Jun-23-2009, 11:59 PM
By WFO in forum Fishing Tutorials by MembersReplies: 17Last Post: Mar-24-2007, 11:16 PM
By WFO in forum Southern California Offshore Trip PlanningReplies: 4Last Post: Mar-21-2007, 07:09 PM